This baby will extend out 25 inches from the wall. Make sure you did a good job mounting!
It's really easy to get that movie theater feel by pulling the TV another 2 feet closer to you.
We couldn't get any closer than about 5 inches from the wall, but if we relocated our wires we'd probably get a few more inches closer.
This is pretty far away in the world of wall mounted TVs.
One of the reasons we can't go as close as we should is because we didn't mount our plug in a very good spot.
Again, our video cables are not in a good spot and as a result the arms hit.
In hindsight it would make more sense to terminate our cables at the bottom. There is plenty of room and that's where the connection are too.
The included wire ties and wire tie mounts makes it easy to route the wires for a clean install.
If you do it right, the wires will stay clear as you move the mount around.
As it should be the wall plate and included lag bolts are heavy duty.
There are three bolts that secure the mount to the wall plate, and yes they are tight.
Don't forget to use the included lock washers!
Depending on how you mount the TV, you may need to use the 6 degrees of roll, by adjusting these screws.
you can really see the meat of this mount from the back. Very adjustable.
90 degrees pan is no joke, but luckily we don't need it often.
This mount will tilt from +5 to -15, which doesn't sound like much, but it's plenty for most applications.