ergotron
Latest
The best monitor arms
By Anna Perling and Jordan McMahon This post was done in partnership with Wirecutter. When readers choose to buy Wirecutter's independently chosen editorial picks, Wirecutter and Engadget may earn affiliate commission. Read the full guide to monitor arms. A great monitor arm can save space on your desk and make your workspace more comfortable and ergonomic. After researching more than 60 monitor arms and testing 13 over the past two years, we found that the Fully Jarvis Monitor Arm is the best option. It's easy to set up, it moves smoothly into a wide range of positions and angles, and it has a solid five-year warranty. The Fully Jarvis Monitor Arm has the same wide range of motion and sturdy build quality as its closest competitors but adds a sleeker design, three color options, and a five-year warranty without a huge price leap. Since it can support monitors up to 32 inches and about 20 pounds, it should work not just with the display you have now but with a potential upgrade in the future as well. If you're considering our runner-up standing desk, Fully gives you a discount on the monitor arm when you buy them together. Supported monitor size: 13 to 32 inches Supported monitor weight: 2.2 to 19.8 pounds Maximum height: 19.8 inches from tabletop If the Fully Jarvis sells out and you can't wait for it to restock, the Ergotron LX Desk Monitor Arm will work just as well. The LX has nearly identical vertical and side-to-side ranges, tilt, and pan and rotation capabilities. Ergotron monitor arms generally cost more than similar options not because of any additional features but because of the company's impressively long, 10-year warranty. Though 10 years may seem like overkill, we think paying for such coverage is a better option than going for the savings provided by other models that offer only a one-year warranty—a monitor arm should last you many years, and the company that makes it should stand behind it. Supported monitor size: up to 34 inches Supported monitor weight: 7 to 25 pounds Maximum height: 25 inches from tabletop People over 6 feet tall need added vertical range to position a monitor at the right height, especially with a desk that lets you switch positions from sitting to standing. The Ergotron LX Desk Monitor Arm, Tall Pole has a 13¼-inch pole and can hold a monitor nearly 15 inches higher than the maximum height of the Fully Jarvis. In our tests we found that the extra height provided an ergonomically ideal range for tall people. In other respects, the Ergotron LX Tall Pole is identical to the standard Ergotron LX arm; it's just as sturdy and easy to assemble. Supported monitor size: up to 34 inches Supported monitor weight: 7 to 25 pounds Maximum height: 34 inches from tabletop If you're looking for a dual-monitor arm, we like the Fully Jarvis Dual Monitor Arm. As with the single-arm versions, the Jarvis dual model costs substantially less than its Ergotron counterpart—in this case, just over half as much—but comes with a shorter warranty. At five years, the Jarvis's warranty is still plenty of coverage, and the simple setup and attractive design make the Jarvis the best dual-monitor arm for most people. Supported monitor size: 13 to 32 inches Supported monitor weight: 2.2 to 19.8 pounds Maximum height: 19.8 inches from tabletop
Ergotron WorkFit-P Sit-Stand workstation: Get on your feet!
Ergotron has been making workstations for Apple machines for years, so it's no surprise that its latest products are perfect for the current line of Macs. Today I'll be providing information on the Ergotron WorkFit-P Sit-Stand workstation (US$299), an innovative idea to help knowledge workers get on their feet for at least part of the day while working instead of being glued to a desk chair. The evidence that sitting too much can be seriously bad for your health has been mounting for years. JustStand.org has some amazing numbers on the health hazards of sitting for prolonged periods every day -- a 2010 American Cancer Society study that was published in the American Journal of Epidemiology noted that women who sat more than six hours per day were 94 percent more likely to die during the study period than physically active counterparts who sat less for less than three hours each day. Martha Grogan, a cardiologist at the Mayo Clinic, said that "For people who sit most of the day, their risk of heart attack is about the same as smoking". The idea behind the WorkFit-P is that you can spend part of your day slouched in your office chair staring at your MacBook, but then have the laptop raised to a comfortable height for standup work the rest of the day. Installing the WorkFit-P is quite easy, with two different methods available. First, if your desk has a pass-through hole for cables and whatnot, there's a special mount included for that. If it doesn't, then there's a strong metal piece with three screw-down clamps on it. I had some issues with the clamp method, primarily because my desk has a three-inch tall "lip" underneath the desk surface that kept me from using one of the clamps. However, just using two of the clamps, the WorkFit-P is still very stable and it's certainly not going anywhere. Ergotron includes all necessary hardware to install the stand, including several tools for tightening up the various screws and clamps. The surface of the WorkFit-P stand is a solid slab of aluminum that appears to be large enough to even hold one of the old 17-inch MacBook Pros. With a 13-inch MacBook Pro, the laptop had a good six-inches of space on either side when placed in the middle of the work surface. The aluminum surface is a perfect match to that of the MacBook Pro. So what holds up that aluminum slab? An impressively designed piece of hardware consisting of an adjustable arm. There's a cylindrical piece that sticks up from the desk mount about a foot. Attached to that is a rotating arm that can swivel a full 360° -- think of it as a very loose "shoulder". From that shoulder extends an arm that can be adjusted down to a desktop level or a high up as you find comfortable. The arm ends in a "wrist and hand" that holds up the slab, the "wrist" being able to swivel left or right as needed. Adjust the arm into a position and the entire assemblage stays put. Even putting a little bit more weight on the workstation surface -- say, a full coffee mug -- didn't move it. But if you need to adjust the surface or push it back down to a desktop level, just give it a good push and it moves accordingly. I did notice a slight amount of movement of the surface while typing, but it was very negligible and I got used to it right away. Now I usually do most of my work on a self-owned iMac (27-inch), but I have a corporately-owned MacBook Pro with Retina display that I use for work on our parent company's VPN. What I've started doing is sharing time between the two computers -- spending part of the time sitting at the "main" computer, but then trying to spend as much time as possible standing at the WorkFit-P to do writing. I'm finding that this is a very comfortable and surprisingly natural way to work. There's one side benefit of using the WorkFit-P and the MacBook Pro while standing. Sometimes while working on my iMac and find myself needing to look up slightly as the top of the 27-inch display is above my sight line. After a few hours of working at the iMac, I usually find that my neck and shoulders are killing me -- probably thanks to a pinched nerve I've had in my neck for about half of my life. When I'm standing at the WorkFit-P and typing on the MacBook Pro, my sight line is pointed down somewhat, taking pressure off of that nerve and lessening the pain. That in itself is enough of a motivation for me to spend at least part of the day standing and typing. While I was thinking about spending a lot of money on a high-end ergonomic chair, I think the WorkFit-P is a much more affordable and healthy alternative. Between helping to strengthen my legs and taking pressure off of my neck, standing part of the work day is already having some very positive effects on my well-being. Oh, and there's one other healthy benefit -- standing up while working burns more calories than sitting around. Desktop Mac owners shouldn't feel left out; Ergotron also makes a number of different WorkFit models that can hold multiple monitors or even -- in the case of the WorkFit-A -- an iMac. Conclusion Ergotron's WorkFit-P Sit-Stand workstation is an affordable and beautifully-designed piece of hardware for making your work life as comfortable and ergonomic as possible. Anyone who spends a good portion of his or her day working on a MacBook should consider the benefits of a standup/sitdown work surface like the WorkFit-P. Rating: 4 stars out of 4 stars possible
Ergotron announces new desks for iMacs, laptops
There has been much discussion about the benefits of standing while working at a computer, but not many well-made solutions for a combined sit /stand-capable desk. Ergotron, Inc., a Nortek Company, has solved the desk problem with its announcement of two new Sit-Stand workstations designed just for Apple computer users.The WorkFit comes in two models, the WorkFit-A for desktop iMacs and the WorkFit-P for MacBook users. Both silver, solid-aluminum Sit-Stand Workstations are designed to compliment your Mac computers. The WorkFit A (US$649.00) "includes arm, work surface, base, keyboard tray support, keyboard tray, desk clamp, grommet mount, assembly fasteners, cable management hardware [and] adjustment tools." Its maximum capacity is 25 lbs (11.4 kg), which easily accommodates the 20 to 22 lb weight of the iMac from late 2009 to present, plus keyboard and mouse. The WorkFit P (US$329.00) attaches to your existing desk and provides a stand or an extra work surface. The WorkFit P "includes arm, work surface, pole base, desk clamp, grommet mount, assembly fasteners, cable management hardware, [and] adjustment tools." You can read more about the benefits and perils of sitting and standing at your computer on many websites, but I think the Cornell University Ergonomics Web and the UCLA Ergonomics sites cover the issues briefly with good information to help you make an informed decision as to whether standing is a good option for you. No matter which option you choose, the Ergotron workstations have you covered.
Ergotron Neo-Flex Combo Lift Stand
Jason Snell over at Macworld got his hands on an interesting new notebook stand: the Ergotron Neo-Flex Combo Lift Stand. What's different about it is that it not only holds the notebook, like the Griffin Elevator I use, but also includes a VESA mount for an external LCD display. By having the notebook platform and the VESA mount on a single base the Neo-Flex lets you put your laptop screen right next to your external display for a relatively seamless multi-display setup. And since everything is on one base it frees up desk space for your keyboard and mouse.Of course there's a price to be paid for this convenience and stylishness: $179. Nonetheless, this looks like one of the slickest setups out there for using a Mac portable together with an external monitor.
