light
Latest
Philips adds web-connected tap switch, white-only lux bulb to Hue lighting lineup
Think you're all done building out your Hue lighting collection? Think again. Philips' latest product is one you're likely going to want to own. The tap switch, available later this year for $60, lets you control connected lights wirelessly by tapping one of four buttons. More impressive, however, is the switch's ability to turn lights off and on without requiring a power source of its own. The device is powered by kinetic energy, so a tap creates enough juice to complete each task. Philips is also announcing a new "lux" bulb, which looks and operates like traditional Hue units, albeit without the 16 million colors. This bulb emits only white light, but it's reportedly very bright. Lux is set to retail for $40 per bulb (compared to $60 for the color version), or $100 in a set of two bundled with a Hue base as well. Like the switch, lux will ship in Europe and North America after the summer.
Philips Hue targets the ultra high end with $3,500 3D-printed luminaires
Philips' Hue collection of app-controlled LED bulbs has never been the cheapest option for lighting a room, but the company's existing products are at least priced to be accessible to many homeowners. That's absolutely no concern when it comes to this latest lineup of lamps, however. The table and pendant luminaries (a fancy word for light fixture) were designed by WertelOberfell and Strand+Hvass. These works of art are still perfectly functional, though -- each is capable of displaying any of 16 million colors, with full wireless control. These 3D-printed fixtures are hardly affordable, however. A selection of table lamps will be available for pre-order beginning March 31st for €2,500 (about $3,500) while the pendant versions will retail for a whopping €3,000 (about $4,150).
Philips' new LED bulbs are powered over Ethernet, provide occupancy and climate info to office managers
Get ready for a whole new generation of connected lightbulbs. Philips latest concept replaces an office's traditional electrical wiring with Ethernet, used to power LED bulbs and pass info to and from each lamp. Each fixture outputs light, but also collects information from a variety of sensors. A motion sensor can track the number of employees in a given area, for example, while a thermometer can report back on the current temperature. Facility managers can track any section of the office in realtime, adjusting lighting and heating from a smartphone app to save on utilities whenever possible. Of course, as you'll need to replace traditional cabling with Ethernet, the installation itself is sure to cost a pretty penny. Philips quotes a 50-percent reduction in installation costs for PoE over traditional wiring with new installations, however, so if you're planning to refurbish an office this is definitely an interesting option to consider.
This is the thinnest LED that anyone can make
Companies have been racing to slim down LED backlights as devices get ever thinner, but the University of Washington may have just beaten everyone to the finish line. Its scientists have developed an LED that, at three atoms thick, is easily the thinnest LED to date -- in fact, it's impossible to build something thinner using current knowledge. The key ingredient is tungsten diselenide, the thinnest known semiconductor. A single sheet of the material is less than a tenth as thick as a conventional LED, but still emits measurable light. It's flexible and strong, too. On a basic level, the technology could be handy for optical circuits, nanolasers and other areas where miniscule lighting is necessary. However, the researchers also see uses for their LED in mobile devices -- it could end up in wearables and other gadgets where even a slight difference in thickness could make a big impact.
Philips' smart lighting tells you where to go in the grocery store
Ever spent ages wandering the grocery store while looking for a hard-to-find ingredient? If Philips brings its new connected retail lighting to your local supermarket, you may always know where to go. The technology uses light-based communication to create a positioning grid for your smartphone, telling you just what route you'll need to take to get everything for that recipe. Naturally, shopkeepers can also use the system for location-based discounts and suggestions; if you're looking for dessert ideas, the lights can point you to the pastry section. Philips is already testing its smart illumination with a handful of stores, so it might not be long before you're shopping with extreme efficiency.
Smartphone concept incorporates LiFi sensor for receiving light-based data
The lights are now dimmed throughout the many halls of CES, and none are more perturbed by darkness than the folks at Oledcomm. Illumination is the company's specialty, after all; or, more specifically, LiFi technology, which facilitates high-speed data transmission via pulsating light sources (though they appear static to the naked eye). We swung by the firm's booth in Vegas to check out the various demos on display, including a two-way, 10 Mbps link tying a Macbook to a router. What interested us most, however, was a concept smartphone that took instructions from the many lamps scattered around the booth.
Steam Greenlights 100 more: Light, Probably Archery, EvilQuest, Saturday Morning RPG
Steam's traffic lights turned Green again, with 100 more games zipping towards the client's Parking Lot of Distribution. Those putting pedal to the digital include carb-surd platformer Potatoman Seeks The Troof, Team 17-published stealther Light, QWOP-like sim Probably Archery. 1980s-fest Saturday Morning RPG, and villainous RPG EvilQuest, to name a few. "These titles were selected on the same criteria we have been using in the past," reads Steam's statement on the approved century. "Votes in Greenlight give us a hugely valuable point of data in gauging community interest along with external factors such as press reviews, crowd-funding successes, performance on other similar platforms, and awards and contests to help form a more complete picture of community interest in each title." The full list of games coming to a Steam near you can be found here.
How would you change Vizio's Thin + Light (14-inch, 2012)?
When Vizio announced that it was making laptops, people flooded our inbox demanding we review the Vizio Thin + Light (14-inch, 2012). After all, the company's reputation for undercutting rivals with quality hardware meant that its debut entry had to be taken seriously. Out of the gate, it won points for us for its cracking build quality and amazing display, but lost marks for a bad trackpad, keyboard and short battery life. In the end, we couldn't recommend this device, but we bet plenty of you went for it anyway. In which case, you'll be expertly placed to tell us, after a few months of use on this thing, what would you change about it?
Worms developer to publish stealthy PC game Light
Stealthy indie game Light will be published by Worms developers Team17, the publisher recently announced. Currently in development for PC, Mac and Linux by Just a Pixel, Light is a top-down 2D game in which players guide a square icon through a maze of doors and rooms, hacking terminals and avoiding guards along the way. This is Team17's first foray into publishing for almost two decades, as it once funded games like Super Stardust and Alien Breed on Amiga, but has since focused on games in the Worms series, including Worms: Clan Wars and Worms 2: Armageddon. The prototype video of the game above shows off its simple style and basic mechanics, which players can expect to see firsthand sometime in 2014. Light is currently seeking community approval via Greenlight to achieve distribution on Steam.
Philips Hue gets down with app-controlled BR30 recessed lights
Philips' latest connected lighting product is taking aim at your recessed fixtures. The new Hue bulb, named BR30 to match the existing standard, screws into sockets typically pre-installed in kitchens, hallways and living rooms. They focus output in a beam, compared to the original Hue bulbs, which yield omni-directional light. That detail is the primary differentiator here -- functionality is identical, as is the price tag of $59 per individual bulb or $199 for a three-pack that includes a Hue bridge. As with their siblings, including the LightStrips and Bloom, you can control the LED BR30s from a smartphone, computer or tablet, letting you assign any color and brightness to individual bulbs. They're rated for a 15,000-hour lifespan, and Philips reports energy savings of up to 80 percent over conventional bulbs. You can pick up the BR30 beginning today from Amazon or Apple retail stores, while European customers can now order a GU10 version, which is more common in track lighting. That latter flavor will ship stateside in December.
Nikon's LD-1000 LED Movie Light, a bright addition to Nikon 1 video shoots
Yup, it's just a light. But the LD-1000 is made by Nikon, and designed to attach to the company's 1-Series mirrorless cameras, such as the J3 or V2, which makes it at least mildly interesting. The AAA-powered bracket-mounted lamp includes four white LEDs and a diffuser, and while its primary focus is to illuminate a subject during a video shoot, you can also use it to provide fill light for still photos, or whenever a constant low-power stream of illumination is more appropriate than a flash. Pick it up in black or white in October for a somewhat ambitious $99.95.
Lightscaping at home with Philips' Hue LightStrips and Bloom (hands-on video)
Earlier today, Philips announced two new add-ons for its app-controlled Hue system: LivingColors Bloom, a standalone portable fixture, and LightStrips, a 6.6-foot LED tape that you can affix to any surface using the included adhesive back. Both products are fully compatible with the existing Hue system, including the base station and three-bulb kit that launched at Apple Stores last year. Knowing that part of the solution's appeal is its quick and easy setup, we decided to build out a five-light rig at home using three standard bulbs, one Bloom and one LightStrips set. It took less than an hour to get up and running, including swapping out bulbs, running power to LightStrips and setting up the base station and app. In order to take full advantage of available "scenes" (lighting color macros based on uploaded images), you'll want to install all of your bulbs in one room or open space. You can very easily control the color and brightness of each unit using the Android or iOS app, however, so if you prefer to go that route, there's no reason you can't install Hue all over your house, as long as you don't go beyond the 50 maximum units each base station can support. For now, most of the available scenes support one through three fixtures, not the five you'll end up with if you have one complete kit, a Bloom and LightStrips in your home, so we avoided using scenes for the time being. If you're using app version 1.1 on iOS, you can take advantage of IFTTT integration, too, letting you set up a virtually endless number of macros. Even with five Hue fixtures in a small space, the room was a bit too dark -- this solution works best for accent lighting, so unless you're prepared to use 20 bulbs in a room, you'll probably want to mix in traditional fixtures, too. Still, Hue serves its purpose well, and we definitely see the appeal despite the $200 you'll spend on the base kit, $80 for the bloom and $90 for the LightStrips. See our installation in action in the hands-on video after the break.%Gallery-195485%
Know Your Lore: The color of magic
The World of Warcraft is an expansive universe. You're playing the game, you're fighting the bosses, you know the how -- but do you know the why? Each week, Matthew Rossi and Anne Stickney make sure you Know Your Lore by covering the history of the story behind World of Warcraft. .@yuvalaziza Both priests and paladins can wield the Holy Light. However, not all wield it through the same means (e.g., Elune, An'she). :) - Sean Copeland (@Loreology) July 22, 2013 Earlier this week, Blizzard Historian Sean Copeland was answering questions on Twitter when the above answer came up. People were upset about it because the answer, while seemingly pretty simplistic, seemed to devalue the importance of Elune and the unique nature of night elf philosophy and religion. Magic, in all its forms and function in Warcraft, is one of those tricky subjects to understand -- almost as tricky as trying to wrap one's brain around the cosmos of the Warcraft universe. These types of questions get asked a lot, however. And while not everything regarding magic in Warcraft has been fully defined, we can definitely take a look at these different schools of magic and how they relate to one another on Azeroth.
Audi teams up with Philips, Merck for world's first 3D OLED tail lights
We've seen LEDs, OLEDs and even frickin' lasers used in automotive lighting, but Audi's just cranked things up a notch with the world's first 3D OLED tail lights. The prototype system was developed in collaboration with Philips, Merck and the University of Cologne, and the research was funded by the German government. What's 3D OLED about, exactly? It's the application of OLEDs to curved glass surfaces, which enables complex shapes with multiple layers and transparency. For the project, Philips invented new manufacturing techniques to produce OLEDs on formed glass using wet chemistry, and Audi then designed tail lights for a TT Roadster to validate the technology. While there's no word yet on the longevity or efficiency, we figure it's only a matter of time until 3D OLED lighting comes to production vehicles.
Scientists find that graphene can be used to build lasers
You already know that graphene can be used to make transistors, solar cells and even Sennheiser-quality cans. But if you think that's about as cool as the carbon material can get, listen to this: It can also be used to make ultrashort-pulse lasers. According to scientists from a smattering of institutions, the atomic-scale chickenwire material has the ability to absorb light effectively -- much like a sponge -- over a broad range of wavelengths. It can then release the light it absorbs in quick bursts that last a few femtoseconds each (with one femtosecond lasting one millionth of one billionth of a second), which is what ultrashort-pulse lasers do. With graphene as a component instead of traditional materials, scientists could develop a laser as small as a pencil that's immune to thermal damage typically caused by intense beams. The finished product, if ever someone actually concocts one, could be applied across a variety of fields -- everything from pollution monitoring to medicine. For those unafraid of technobabble, there's plenty more in the source link. [Image credit: Michaelpkk, Wikimedia]
Philips Hue just got a little brighter with 1.1 app update
"What's new with Hue?" Philips' connected light bulb just picked up a bounty of fresh tricks, thanks in no small part to the Hue 1.1 app update. The refresh, available for download today on iOS, brings a variety of additional features. Most significant, perhaps, is a partnership with IFTTT, which lets you create macros (called "recipes") for an unlimited number of functions. For example, if the forecast calls for rain, Hue can glow blue when it's time to leave in the morning. You can set visual notifications (a flashing light or change in color) to remind you of calendar appointments, let you know there's a new post on your Facebook wall, you name it. The new app also uses your smartphone's GPS for geofencing, so you can program the system to flip on lights as you approach your home, or turn everything off after you walk out the door. An alarm tool can wake you at a specific time, while the timer function will tweak the lights when the clock hits zero. The LED bulbs will run you $60 a pop, or $200 in a pack of three that also includes a (compulsory) wireless bridge. You can snag the updated app for free at the source link below, then join in on some pun-filled fun in the video after the break.
Satechi USB Bottle Lamp lights your desk with LEDs and power from a PC
Sure, the novelty may have worn off years ago when it comes to those miniature USB-powered accessories that reside on your desk and suck power from a PC, but this nifty lamp from Satechi has a bit more going for it. The simply named USB LED Bottle Lamp consumes just 1.2 watts of power, and while it won't likely have enough output to fill a room, it'll probably do a fair job of bringing some warmth to your workstation. The kit includes only a lampshade, LEDs (rated for 50,000 hours) and a USB cable -- that's right, it's BYOB (Bring Your Own Base). A heavy liquor bottle might be the best fit when it comes to support, but you can use a vase or any similar vessel to keep the lamp upright, too. The USB Bottle Lamp can be yours today for just 25 bucks. Hit the source link below to pick one up.
3Gbps LED light bulb WLAN achieved by Fraunhofer Heinrich Hertz Institute
We first noted it back in 2008: the possibility of using LED light bulbs for secure and directional wireless internet access. Well, the Fraunhofer Heinrich Hertz Institute is claiming that speedy data rates of up 3Gbps have are indeed feasible. The boost comes from its latest enhancements, allowing the 180Mhz frequency to be used over the usual 30MHz, which apparently leaves extra room for moving data. If you'll recall, that's a significant leap over the 800Mbps top speed it achieved back in 2011 mixing various light colors. While this IR-like take on wireless internet access gains steam, remember that it's more likely to be used in areas where WiFi radios cause interruptions (hospitals, trade shows like CES, etc.) -- rather than a strip of mini spot lights from IKEA for the casa. (We can dream, can't we?) FHHI plans to show off the new gear at FOE '13, but for now you'll find the full press release after the break.
Lighty paints real lighting Photoshop-style, minus the overdone lens flare (video)
It's not hard to find smart lightbulbs that bow to our every whim. Creating a well-coordinated light scheme can be difficult without tweaking elements one by one, however, which makes the Japan Science and Technology Agency's Lighty project that much more elegant. The approach lets would-be interior coordinators paint degrees of light and shadow through an app, much as they would create a magnum opus in Photoshop or a similar image editor. Its robotic lighting system sorts out the rest: a GPU-assisted computer steers a grid of gimbal-mounted lightbulbs until their positions and intensity match the effect produced on the screen. While Lighty currently exists just as a scale model, the developers plan to work with life-sized rooms, and potentially large halls, from now on. We're all for the newfound creativity in our lighting, as long as we can't mess it up with a Gaussian Blur filter.
Lumio desk lamp takes light reading literally (video)
With the future of reading heading squarely in the direction of electronic devices, what to do with the old timey book form? Build a lamp, of course. During a recent visit to the City by the Bay, we popped into the TechShop hackerspace and were introduced to Max Gunawan, the designer behind Lumio (not to be confused with a certain smartphone line of similar name). The product, developed in that very space, offers up a cool take on the desktop lamp, fitting it into a wooden, old timey-looking book form. Open it up and the pages fan out into what looks like a paper lantern. It's an LED light powered by a lithium ion battery that'll give you around eight hours on a charge. Due to the foldable nature of the Lumio, the device is portable and can be opened into a number of configurations, to suit your needs. Gunawan is a couple of days away from launching a Kickstarter page for the project, in hopes of getting together $60,000. Interested funders will be able to pick one up for around $95 -- wait for it to come to market, and that price will jump to around $125 or $135. After the break, check out a video of Gunawan giving us the lowdown on Lumio.%Gallery-178413%
