SignalBooster
Latest
Netgear and Harman Kardon’s smart speaker doubles as a WiFi repeater
An unlikely partnership between router maker Netgear and audio company Harman Kardon has resulted in a smart speaker that does just a little bit more than its competitors. The Orbi Voice isn't just another Alexa speaker, it's got serious sound pedigree and it acts as a WiFi repeater too, spreading internet while it's pumping tunes.
Have your say on the FCC's plan to lock down WiFi routers
You may know that you can replace your WiFi router's software with an open source version like DD-WRT or Tomato to make it more secure or powerful. However, the US wireless regulator (FCC) only seems to have figured that out recently, and is not happy with your ability to boost the signal power excessively on such devices. As such, it proposed changes to regulations, with one document suggesting it may ban or restrict third-party software altogether. That caught the eye of the Electronic Frontier Foundation (EFF), which created an online petition asking the FCC to make changes.
Wilson Electronics' new 4G signal booster doesn't care about carriers
Wilson Electronics is only interested in one thing: boosting cellular signals for those starved of bars. The company's also quite fond of Vegas, and for the third year running, it has made the trip to CES with fresh hardware in tow. Previously, Wilson's boosters have been able to enhance the signal from a couple of carriers at the most, but the new DT4G doesn't care what device you're using, nor which network bills you at the end of the month -- all it cares about is making sure you've got all the 4G, 3G or 2G airwaves you need. It's touted as the very first carrier-agnostic booster, and will be ready to cling to walls "soon" for around $400.
Linkase looks to improve iPhone wifi reception
You can relive the days of cell phone antennas thanks to this iPhone case from Absolute Technology. The Linkcase for the iPhone 5 has an electromagnetic waveguide (EMW) antenna that'll improve WiFi performance in your phone. The EMW element responsible for improving WiFi reception is embedded into the back of the case, and you can slide it up when you need a boost in your wireless signal. Linkase claims it can deliver a 50 percent improvement in reception by moving the antenna up and out of the way of your hands. The case is landing in the hands of reviewers, but it is not yet available for sale. It'll retail for US$49.95 and will be available in Coal Black, Ash Gray, Frost White, Chili Red and Antarctic Blue.
CES 2013: Wilson Electronics introduces the Sleek 4G booster to get your iPhone more signal
Wilson Electronics has been making cell phone signal boosters for a while now, both for home use and for larger scale settings like offices and commercial use. But the company is turning to something more personal with its new Sleek 4G cell phone booster, which is a phone stand that will make your iPhone's signal (or a signal from any phone, really) up to 10 times more powerful. The booster, which is shipping next week, basically consists of a phone stand that you can either place on your desk or stick on your car's dashboard, and then a cord leading off of it that connects to an antenna with a magnetic base. That's it -- you don't need to actually connect your phone up at all, because the stand will just grab the signal automatically. The stand itself has a few different prongs on the sides that you can adjust depending on what phone you're using, but other than that, it just boosts a signal, and well. A normal phone signal, according to Wilson, runs at about 200 mW, but with the Sleek 4G adding a boost, the signal can reach up to 2,000 mW. Wilson's reps told us that most people think of using cell phone boosters out in more rural areas, but given all of the holes and issues in more populated areas, it can be helpful in bigger cities, too. And the booster has one other big benefit: It'll increase the battery life on the phone. By making sure the signal is always strong, Wilson says that many users have seen phones last longer than before. At $199, this isn't a small investment for sure. But if you constantly have problems with your iPhone's signal and could use a way to keep it going whether you're in a home or office or out and about in your car, Wilson's Sleek 4G booster could help.
Wilson Electronics releases three 4G multi-band signal boosters, no soup for Sprint
Even if you live in an area with 4G coverage, you might not get the best service inside certain buildings, and that's where companies like Wilson Electronics come in -- just take a peek at its Sleek 4G-V, for example. At MobileCon 2012, the antenna maker added three more to its lineup. They are the Tri-band 4G-V, the Tri-band 4G-A, and the Tri-band 4G-C, and are meant for Verizon's 4G LTE, AT&T's 4G LTE, and T-Mobile's "faux-G" network -- the latter of which is also recommended for use throughout Canada. The antennas are designed to boost the signal of older legacy networks too, so no worries if you don't live in an area blessed with 4G. No pricing and availability just yet, and we don't see any sign of a Sprint antenna either. To get more details, catch the full PR after the break.
AT&T reveals new multi-beam antenna tech for live events, could offer data speeds five times faster (video)
AT&T's improving its coverage at live events by establishing a new (impressive sounding) setup -- the five-beam multi-beam antenna. It works by dividing its customers' signals into five narrow parts, illustrated above by the color bands, upping the bandwidth by splitting traffic to each segment, enabling up to five times the data traffic. Ma Bell even used similar technology to craft a "super" multi-beam antenna, which expands the same idea into two rows of nine, possibly offering up to 18 times the speed of a typical single-tower arrangement. AT&T adds that this setup also reduces dropped calls and failed uploads, and is apparently already being put to use at live concerts and games. Not quite wrapping your head around it? Check the video after the break.
Wilson Electronics' Sleek 4G-V Verizon flavored signal booster reports for service
If you're often finding that your super-duper 4G service is more LT-Eh?, than LTE, then you might have been curious about Wilson Electronics' Sleek 4G-V cellphone signal booster. If you were, it's time to stop waving your hand in the air looking for bars, and stick it in your pocket in search of some sheets, as it's now available in stores. Of course, it's Verizon customers who'll benefit the most, with the Sleek 4G-V being designed with the big red's 700MHz service in mind. That said good old 2- and 3G services are still given a leg up. The MSRP remains $129 for the standard "in-vehicle" model, with an optional accessory kit for indoor use (no price at this time). If this message kept dropping out, head over to the window past the break for the PR.
Terahertz bandwidth: the key to 1,000x faster smartphones, laptops and pipe dreams
Much like carbon nanotubes and quantum computing, terahertz technologies have been promising miracles for nearly as long as humans have been able to distinguish water from fire. We exaggerate, but barely. A crafty team assembled at the University of Pittsburgh seems to have no qualms with moving forward, however, recently announcing a new physical basis for terahertz bandwidth. Those involved managed to have success in generating a frequency comb -- "dividing a single color of light into a series of evenly spaced spectral lines for a variety of uses -- that spans a more than 100 terahertz bandwidth by exciting a coherent collective of atomic motions in a semiconductor silicon crystal." For those who managed to make it through the technobabble, we're told that the ability to modulate light with such a bandwidth could "increase the amount of information carried by more than 1,000 times when compared to the volume carried with today's technologies." Smartphones, computers and even airline check-in kiosks that operate 1,000 faster than they do today? Sure, we'll take that. But, how about give us a ring when Wally World deems it ripe for commercialization? We'll be waiting -- pinky promise.
Three zBoost signal amplifiers to be unveiled at CES: SOHO Xtreme for home, zForce for car and 4G-V for Verizon LTE
If you live in or commute through so-called "dead zones" for mobile service, then let us introduce you to the latest swath of signal boosters from Wi-Ex, each which are set to be unveiled at CES 2012. The first two -- compatible with the 800MHz and 1900MHz frequency bands -- include the zBoost zForce, an in-car amplification rig that'll retail for $99 (or $149 with the gooseneck adapter), and the zBoost SOHO Xtreme, which covers up to 5500 square feet and will set you back $549. Both products are ready for immediate availability. Finally, set for release in Q2 2012 is the zBoost 4G-V, which is designed specifically for Verizon's LTE network -- although, its price has yet to be announced. If you need a little boost in your life, be sure to check the gallery below and full PR after the break.
Wilson Electronics introduces the world's first LTE signal booster ahead of CES
Love Verizon's LTE but just can't seem to get bars of service in your office or home? Wilson Electronics has announced the Sleek4G-V, which the company claims is the world's first 4G mobile signal booster. We haven't found any contenders to the claim, but either way the signal enhancer is bound and determined to beef up your high-speed data. In addition to providing Verizon-specific LTE, Wilson promises 2G / 3G connectivity for all major US carriers (iDEN capabilities excluded) just in case you need to actually, y'know, make calls on your phone. While it's designed primarily for outdoor use, an optional accessory kit can be purchased to make it work indoors quite soundly. Listed for $150, the Sleek4G-V should make its way to retailers by the second quarter of this year. Check out the press release for all the details.
Wilson Electronics debuts the AWS 70 signal booster to bring life to your office's T-Mobile dead zone
See that beauty up above? That, dear friends, is the Wilson Electronics AWS 70 signal booster. We know, it doesn't look like the standard-issue 50-cent sticker that you slap underneath your battery, right? This beefy guy is meant to be a thousand times more effective, aiming to amplify your office's poor AWS signal -- most notably T-Mobile, but any 1700 / 2100 AWS connection can benefit -- by a total gain of 70dB. The booster offers the ability to manually adjust the amount of gain for uplink and downlink separately, so you can optimize it however you deem fit. With a MSRP of $360, it's not for the weak-walleted -- you'll likely want to put it on the company tab. If you're interested in how this all goes down, check out the presser below.
Optus intros 3G Home Zone, Australia's first consumer femtocell
Friends down under: have you been craving a femtocell even more than that luscious vegemite sandwich sitting in your fridge? Undoubtedly you have, if your humble home was built squarely in a black hole of coverage. Optus has the perfect solution, but it's going to cost you; the new 3G Home Zone beefs up the signal in your abode, using your broadband connection to magically transform your dead zone into five bars of wireless heaven. All it takes is a fair amount of green stuff -- the upfront cost ranges from AU$60 to AU$240, but monthly installment plans are available -- and a minimum 1Mbps down / 256Kbps up broadband connection. Oh, and it's only available in select stores for now, so check to see if your neighborhood store has one in stock before squandering away what's left of your day. One last thing: in view of the fact that the 3G Home Zone sucks up data like a milkshake, it's a good idea to make sure a capped data plan won't leave you sidelined before the month is over. Full PR after the break. [Thanks, James]
Femto Forum publishes API specification for femtocell apps, places focus on 'awareness information'
As if the world needed one more association to keep up with, CTIA Wireless 2011 is delivering just that. The Femto Forum, which has done an excellent job remaining undercover of late, has just published an "industry-wide agreed set of API specifications" that will enable "advanced mobile applications based on femtocell technology." Truth be told, the first apps based on the specifications have already been built, and their currently available to the femtocell community. The specifications are for network-based APIs, which will purportedly "allow operators to drive the development of femtocell-powered open access, enterprise and consumer applications," and it'll also provide awareness information in order to allow developers the opportunity to incorporate enhanced presence, context and location-sensitive features into new and existing apps. Granted, we'd care a lot more about those location-based apps if we could drag our 3G MicroCell to Panama to use it to make free calls whilst on vacation, but hey -- maybe that's the next logical step. Not that we're much for passing along hints or anything.
AT&T rolling out MicroCell to five more markets
We've previously written about AT&T's MicroCell device and service here at TUAW. It's a tiny cell tower that you plug into your home cable or DSL connection to boost your phone reception. This is particularly handy for those with home offices who may currently be plagued with poor reception on their iPhones. WMExperts is reporting that AT&T is adding five more markets to the short list of trial areas. If you live in Georgia, North Carolina, South Carolina, Las Vegas, or San Diego, you can have the opportunity to spend an additional US$19.99 per month on top of your existing iPhone service plan to get 5 bar service in an area up to 5,000 square feet around your MicroCell. To determine whether or not you're currently in one of the target zones for the service, visit the AT&T 3G MicroCell website and enter your zip code into the appropriate spot. If you're one of the lucky ones, a list of retail locations where you can purchase the MicroCell will appear. You'll also have to pony up $150 for the device in addition to the monthly charge, but for those who really need perfect 3G phone service in their homes or offices, it's worth the cost. [via TiPb]
Wilson Electronics Sleek signal booster reviewed: surprise, it works!
Signal booster. There, we said it. Quick -- what immediately comes to mind? We're guessing you're suddenly disgusted by the fact that you paid $19.99 (plus a nominal shipping and processing fee) for one of those worthless stickers back when your Snake-laden Nokia candybar had the worst reception of all time, but Wilson Electronics' Sleek is a horse of a different color. Our good pals over at Gadling were able to test out the Sleek after catching it at CES, and amazingly enough, they found that it worked exactly as advertised. It's engineered to be mounted in a car so that your phone can rest in the cradle while you use some sort of headset to communicate, but an AC adapter is available for those who need a boost indoors. The only real downside (besides the steep $129 asking price) is that you can't very well have your mobile in the cradle and the cradle upside your head. Unless, of course, you're still looking to relive the days when Sidetalkin' was all the rage. Man, where's the N-Gage when we need it?
How would you change AT&T's 3G MicroCell?
We know, we know -- AT&T's 3G MicroCell isn't even out nationwide yet, but for those select markets that have access, we're hoping you'll chime in on the pros and cons as to enlighten the other folks before their time comes. By and large, the GSM femotocell works exactly like the Airave for Sprint, though this one does fully support 3G data as well as simultaneous voice and data usage. For those that have taken the plunge: are you satisfied with the value proposition? Is reception really any better? Have you ditched your landline yet? What would you change about the service or billing? Voice your opinion on the matter below, and remember, life doesn't present you with many chances such as this. Wouldn't want to waste it, now would we?
AT&T's 3G MicroCell tested and reviewed by Charlottean: yes, it works
For those who missed the torrent of 3G MicroCell news yesterday, here's the long and short of it: the Cisco-built device is now on sale, but only in Charlotte, North Carolina. One fortunate Charlottean managed to scoop one up, but rather than keeping the experience to himself, he decided to bang out a full review for the rest of the world to see. By and large, Jason's experience with the femtocell mirrored our own with Sprint's AIRAVE. Installation and setup was a breeze, and once it was booted up and operational, it worked like a charm. Before picking this up, he was seeing one bar of EDGE (if he was lucky); afterwards, his entire house was blanketed with five bars of 3G. Not surprisingly, he noted that the before and after difference when fielding calls was "night and day," but he did take the opportunity to bark at the lofty $150 price tag. But hey, those desperate enough will cough up anything to actually use their phone, right?
Wi-Fire long-range WiFi adapter hands-on and impressions
It's an age-old problem. What do you do when you're just barely out of range of a nearby WiFi signal, and moving closer really isn't a convenient option? hField Technologies has been solving said quandary for years with its continually revamped Wi-Fire, and we were fortunate enough to grab hold of the newest, third-generation version in order to put said company's claims to the test. Quite frankly, we were more than skeptical about this so-called range extender; let's face it, this thing has all the markings of an 'As Seen On TV' trinket that does little more than fantasize about delivering on its promises. Thankfully for all of the parties involved, we're happy to say that our doubts were hastily shelved. Read on for more.
hField Technologies intros revamped Wi-Fire long-range WiFi adapter
Evidently hField Technologies has a good thing going with this inelegant Wi-Fire thingamajig, as it has just followed up versions one and two with the latest and greatest third iteration. The revamped Wi-Fire, which is more formally known as the HFWFG200, is said to be some 40 percent smaller and 30 percent lighter than the previous incarnation, yet it promises to maintain a solid WiFi signal while up to 1,000 feet away from the source. In one of those classic "two steps forward, three leaps back" moments, the company has added in support for Linux and OS X-based systems, though the device only works with 802.11b/g devices. In other words, you won't see 802.11n speeds out of this thing, and you'll still get looked at funny with it affixed atop your laptop's display. If you're willing to swap dignity for connectivity, you can get one headed your way today for $59.[Via HotHardware]
