Just about everyone wants to mount an HDTV on the wall but most don't wants to run wires to it. No way around running at least power, but as for the rest there are a few solutions if you have the cash. One of those solutions is the Philips Wireless HDTV Link. In addition to the obvious wireless functionality, It is also a 2 way HDMI and 2 way component switch. The way it works is that you mount a small, lightweight receiver around your TV with a single HDMI cable running tethered to your HDTV. Then you put the larger transmitter with all the inputs within 75-feet of your HDTV with all your source equipment connected to it. Then with a help from the included remote you can watch any one of the four HD sources on your remote HDTV. For the most part it works exactly as advertised, but we found that when we put the transmitter in a closet in the next room things took a little longer than they should to sync up. The good news is that we had no troubles sending 1080p60 from across a room and there was no noticeable lag. The bad news is that unless all your devices work in HDMI CEC harmony, you're still going to need some way to get the remote IR to the source equipment. Speaking of a remote, the included remote is simple enough and luckily easily replaced with your programmable one. At the retail price of $799 Philips is crazy, but considering this can be had for less than $400 from some online retailers it might be just the thing you're looking for if you can't run HDMI cables between our equipment.