DiyTablet
Latest
DIY tablet kit is less than $400, more complicated than an iPad
Tired of The Man holding you down on the tablet front with his oppressive App Stores, his tyrannical carrier constraints, and other outrageous insults to your civil liberties? Well now you can break free of this stranglehold, thanks to a company called Liquidware and its open source, DIY tablet starter kit. The premise is simple: Liquidware provides a touchscreen OLED display (4.3-inch, 480 x 272, resistive touch), the BeagleBoard guts (a single-board computer driven by a 720MHz ARM Cortex-A8 OMAP3530 CPU, with 2GB of NAND and an SD card slot), and the BeagleJuice battery module, along with an SD card pre-loaded with Angstrom Linux. You put all the pieces together and then just basically go nuts, designing your own application marketplace, infrastructure for direct-to-consumer video and audio sales, and a revolutionary and magical user interface that blurs the lines between waking life and a hallucinatory dream-state where anything is possible, and the only limitation is yourself. Check the Moscone Center's booking information below to see scheduling availability for your developer conference, and hit the source link to offer up your $393.61 to Liquidware.
MSI X340 reborn as DIY carbon fiber tablet, watch it stream YouTube at 720p (video)
Tired of touchscreen tablets that lack speed, a usable UI, or support for a certain streaming video format that will go unnamed? As one of our favorite sayings goes, if you want it done right, do it yourself. One Engadget reader took that idea to heart in crafting the 13.4-inch carbon fiber contraption you see above, imbuing it with enough high-end netbook parts to run Windows 7 at a brisk pace and play 720p video on its large, resistive touchscreen. Starting with the guts of an MSI X320, adding an accelerometer and 40GB solid state drive and finally sandwiching a random Chinese digitizer on top, the whole 1.6GHz Atom Z530 machine cost him under $700 in parts. For that price, we're sure many of you would be happy to follow in his footsteps, but if not, by all means continue complaining to your tablet manufacturer of choice. We have another favorite saying: the squeaky wheel gets the grease. Video after the break; Q&A with the creator at our more coverage link.
Homegrown Wacom Cintiq LCD tablet comes to life through prefab DIY enclosure
Dropped a stack of change on a premium Wacom drawing tablet, only to find yourself with Cintiq envy? Got an old laptop handy? If so, odds are good that you've occasionally (or persistently, for that matter) thought about hacking together an LCD tablet of your very own. Problem is, the mods we've seen require some serious shop time -- building a custom enclosure isn't for the lighthearted, you know? But if you're in possession of a sizable Wacom Intuos and roughly $220 of post-tax cheddar, TabletMod.com has a purpose-built, laser-cut acrylic enclosure with your name on it. You'll still need an LCD controller kit and CCFL extenders, and there's still a chance you'll be paying more for the whole kit and caboodle than if you just got a low-end $1,000 Cintiq 12WX to begin with -- but if you've already got half the parts lying around (or you're just dying to scratch another DIY itch), this project might be worth your while. Cheapskates like us, however, will continue to wait for the Bamboo variety, though you can certainly dabble in the source link if you're scouting some instructional videos.
UK artist builds DIY Wacom Cintiq tablet for under $200
Artist and gadget builder Drew Northcott, of Bicester, UK, has just spent the last five months building his own Wacom Cintiq drawing tablet (no, not a tablet computer). Now of course, Drew could just have gone the normal way and bought the 21-incher for $3000, but as he cleverly pointed out: "where's the fun in just buying something?" He told us that after having begun the project on June 8 with nothing more than an idea, he finally "bolted the case shut" on November 9 -- almost exactly five months after having begun his odyssey. How'd our intrepid young artist do it? Basically he gutted a working Dell 1501fp monitor, stripped out the screen, and put it together with the magnetic sensor from the tablet into the Wacom case, along with a 2-millimeter acrylic panel over the screen for protection. However, that's a much simpler explanation than his 18-part online series, where Drew's got tons of photos to document each and every exciting step. So the final question is, how much did all these parts (time costs aside) run our good friend Mr. Northcott? Roughly £100 ($190), a heckuva savings by any measurement.[Thanks, Chris M.]
