sandforce controller
Latest
ADATA ships its Premier and Premier Pro SSDs to US, gives your laptop a dose of energy
If you remember those Premier SP800 and Premier Pro SP900 solid-state drives that ADATA teased us with in February, you'll be glad to know that they've crossed the Pacific to reach the US and Canada. The two SSDs are meant to give a swift kick to the performance of laptops with regular-sized, 2.5-inch drive bays. Both use SandForce controllers, but are focused on very different areas: the Premier's SATA II interface, 280MB/s reads and 260MB/s writes suit it most to newcomers looking to escape the land of spinning hard drives, while the tangibly faster SATA III, 550MB/s reads and 520MB/s writes of the Premier Pro cater more to the speed junkie set. Tracking down the Premier's 32GB and 64GB flavors might be a challenge, based on our early checks, but we've already found the Premier Pro's 64GB, 128GB and 256GB varieties lurking on Newegg at pre-discount prices between $100 and $300.
OWC updates its Mercury Extreme Pro 3G SSD lineup, offers 30GBs for just $68
Say hello to Other World Computing's latest 2.5-inch SSD, the 30GB variant of its Mercury Extreme Pro 3G series (3Gb/s, of course). This SandForce-driven SSD may not have loads of storage, but priced at a wallet-friendly 68 bucks, it's certainly tempting if your optical drive's been gathering dust. Whether you're running an ungodly amount of Firefox tabs on a Mac or Windows machine, you'll be covered with "sustained data rates of over 275MB/s," keeping your tasks speedy. Ready to ditch the beach balls and hourglasses? It's available now from OWC and you'll find more info in the PR past the break.
Kingston HyperX SSDs now shipping, SandForce-equipped for Hyperspeed
Brace yourselves speed freaks -- Kingston Digital is now shipping its latest 2.5-inch HyperX SSD drives, equipped with 6Gb/sec SATA Rev 3.0 and everyone's favorite SandForce SF-2281 controller. You want fast? You'll get fast, alright. This SSD's read / write speeds top out at 555MB/sec and 510MB/sec, which is surely enough to keep your rig zipping through those intense gaming marathons office workloads. You'll be able to pick up the drive itself with 120GB of storage for $270 or 240GB for $520, while the install kit -- which includes such goodies as a SATA cable, desktop mount, torque screws and more -- tacks on an extra $15 and $20, respectively. That pricing is only for a limited time though, so be sure to check the PR and hyper-edited video past the break for all the details.
Corsair Force series gets 90GB and 180GB brothers, middle child syndrome inevitable
Corsair has added new 90GB and 180GB sizes to its blazin' fast Force Series of SSDs, growing the happy family which already included 60, 120, and 240GB versions in addition to the original 100GB and 200GB options released back in the spring. Unlike its previous siblings, both the F90 and F180 are also available immediately from Corsair dealers for suggested MSRPs of $255 and $430, respectively. Built around the lauded SandForce SF-1200 controller and capable of beastly 285MB/sec read speeds and 275MB/sec write rates, these latest releases are not too small and not too big, making them the perfect Goldie Locks drives of the SSD world. To hear the news straight from Corsair's mouth, check out the press release after the break.
(You can't get no) SATAsfaction 6Gbps SSDs (yet)
Enterprise solid state drives aren't typically our foray, but when they support SATA 6G, we pay attention. It also doesn't hurt when they sport a fantastic name. The SATAsfaction drives from Accelerated Memory Production (AMP) have both Sandforce controllers and the speedy ports to match, alongside 12 byte per sector ECC error correction and TRIM support. Still, they're not the fastest SSDs around, clocking in at only 260MB / sec reads and 150MB / sec writes, but they do have SLC flash memory for likely higher reliability than the current speed demon. No pricing or availability yet, but SLC NAND is pretty expensive stuff... so unless you're buying for a corporation with a large bankroll, better count on waiting for the cheaper Devo version.
Corsair's 100GB Force SSD scorches the test bench with its blazing speed
The name's Force, SandForce. Corsair's making it kinda easy on us to spot its first SandForce-controlled SSD, and there's no reason it should be bashful about it, given that the SF-1500 is currently the fastest SSD processor around. The F100 in question has the SF-1200 onboard, offering a lesser 285MBps read and 275MBps writes (oh, such measly specs!), but that also means you might, might, actually find a way to afford one. The TweakTown crew took one for a spin recently and were happily surprised to find little in the way of performance difference between SandForce's supposedly enterprise-class SF-1500 and consumer-class SF-1200 -- both sped ahead of the Intel X25-M G2 and Indilinx Barefoot-controlled drives. The speed conclusion was clear cut, and with pricing for the 100GB F100 projected to be as low as $400, the value proposition doesn't look too bad either. The 200GB variant is expected to land somewhere around $700 when Corsair's Force SSDs make it out to retail in a few days' time.
Corsair Force gives us another SandForce-controlled SSD speed demon
Seriously, if you're shopping for an SSD and don't know the name SandForce yet, you're not doing it right. The producer of what looks to be the consensus fastest controller on the market is spreading its wings today with a new drive announced by Corsair that offers its SF-1200 chip and capacities of either 100GB or 200GB. The Force follows swiftly in the wake of the Nova and Reactor series and represents Corsair's new flagship device in this space. It'll offer the generous consumer a sweet 280MBps read and 260MBps write speeds (yes, those are megabytes we're talking about), "class-leading random read/write performance," and the requisite Trim support to ensure it maintains that performance in the long run. A specific price is not yet known, but these are expected out within the next couple of weeks.
