Water jumping microbot proves anything bugs can do, robots can do too

Bugs are creepy. You don't need to be an entomophobe to empathize with that sentiment. But bugs are also inspiring -- to researchers in China, that is. Taking a cue from nature, a team of engineers from the country's School of Chemical Engineering and Technology have devised a microbot weighing just 0.02 lbs (11 grams) that can repeatedly jump across the surface of water without tanking. How'd they do it? Well, by using a highly repellent foam coating, the strider-like bot's legs are able to stay afloat with every 5.5 inch (14 cm) leap it makes, buffering the force that would normally plunge it below the H20. The creation of this hydrophobic mini-insectoborg isn't exactly the first of its kind, other aquatic gliders have come before, but this itty bitty fella's the first to successfully and repeatedly hop along an aqueous top. Unfortunately, there's no video demo for you to feast your eyes upon, so you'll just have to take our word for it.

Show full PR text

The first robot that mimics the water striders' jumping abilities

"Why Superhydrophobicity Is Crucial for a Water−Jumping Microrobot? Experimental and Theoretical Investigations"
ACS Applied Materials & Interfaces

The first bio-inspired microrobot capable of not just walking on water like the water strider – but continuously jumping up and down like a real water strider – now is a reality. Scientists reported development of the agile microrobot, which could use its jumping ability to avoid obstacles on reconnaissance or other missions, in ACS Applied Materials & Interfaces.

Qinmin Pan and colleagues explain that scientists have reported a number of advances toward tiny robots that can walk on water. Such robots could skim across lakes and other bodies of water to monitor water quality or act as tiny spies. However, even the most advanced designs – including one from Pan's team last year – can only walk on water. Pan notes that real water striders actually leap. Making a jumping robot is difficult because the downward force needed to propel it into the air usually pushes the legs through the water's surface. Pan's group looked for novel mechanisms and materials to build a true water-striding robot.

Using porous, super water-repellant nickel foam to fabricate the three supporting and two jumping legs, the group made a robot that could leap more than 5.5 inches, despite weighing as much as 1,100 water striders. In experiments, the robot could jump nearly 14 inches forward – more than twice its own length – leaving the water at about 3.6 miles per hour. The authors report that the ability to leap will make the bio-inspired microrobot more agile and better able to avoid obstacles it encounters on the water's surface.

The authors acknowledge funding from the State Key Laboratory of Robotics and System of Harbin Institute of Technology and the National Natural Science Foundation of China.

0 Comments

Chinese microbot walks on water, skims the surface of insect-inspired design