dvt
Latest
iPhone N94 prototype's front assembly leaked, set to be an iPhone 4S?
As we approach the rumored September or October launch date for the next batch of iPhones, the web's been spiced up with photos of alleged parts for an "N94" iPhone prototype. We've been rather skeptical about them until the above photos landed in our inbox, courtesy of our friends from uBreakiFix. A little while back we'd already heard from our other sources that the N94 is set to be a cheaper version of the current iPhone 4 (probably the 8GB iPhone 4 mentioned by Reuters last week), which would explain why all these components and cables look super familiar. The only notable difference here is the funny dot right next to the sensor location above the earpiece -- the dotted pattern is very much like that used by the microphone and the webcam LED indicator on Mac computers, but obviously the latter is more likely the case here.That said, do bear in mind that according to the mark along the bottom of this part, we're apparently looking at an "EVT1" (Engineering Verification Test) piece from March 3rd 2011 (making it about three months older than the white N94 back covers that made the rounds last week, assuming they're legit). Additionally, when our sources last checked around June and July, the N94 had yet to hit the DVT stage, so it's hard to determine whether these parts will remain the same in the final design, or whether the N94 will even make it to the production line at all.On the other hand, our sources pointed out that an elusive N97 device -- previously reported by the Wall Street Journal as a tiny iPhone -- had already reached "DVT" (Design Verification Test) stage back in June, though there's little information about it other than that it's been tested with various cellular technologies (though plagued by some bugs related to switching between specific frequencies back then), plus it may sport a camera module supplied by Sony, which was semi-confirmed by Howard Stringer himself back in April. Whatever the N97 ends up being, hopefully we'll have something at least as slim as our little souvenir from Beijing.
iPod touch prototype with capacitive home button leaked?
Ah, would you look at that. Earlier this year there were rumors about Apple ditching the physical home button on upcoming iOS devices, and now we have what appears to be a new iPod touch prototype matching such description, courtesy of CrunchGear via Mr. Blurrycam. According to its About screen, this "DVT-1" (a late milestone) device packs 128GB of memory -- twice as much as the largest available capacity option right now (remember that 64GB iPhone 4 prototype in Hong Kong?) -- as well as a model number "MC550LL" which isn't far off from those of the fourth-gen iPod touches ("MC54xLL"), though this similarity doesn't help prove its authenticity nor indicate whether it'll make it to the market. Still, if Apple does go ahead with this grubby device or at least its capacitive home button, we might see new touch or gesture controls for the bezel area below the screen à la webOS, as suggested by an earlier patent. But hey, let's not take this too seriously for now -- all this could turn out to be just a much belated April Fools' prank, right?
iPod touch with 2 megapixel camera leaked in Vietnam (video)
Guess who has another Apple scoop? Tinhte, the upstarts from Vietnam have first pics of the mythical iPod touch with a camera. The "DVT-1" stamp on the back makes it clear that this is an early design verification test unit in the evolution of product testing. In other words, this might not be the final design whenever Apple chooses to announce it, say, on June 7th. A check of the device's serial number identifies a late 2009 third generation iPod touch -- could be that this device was one of those eBay prototypes that never made it to production for whatever reason. The Foxconn manufactured device is also running the same base diagnostic utility that we've seen before (who could forget that "serial number" icon). The Foxconn label appears to indicate a 64GB model ("64G" using a pair of Samsung 32GB Flash modules presumably) in addition to a 2 megapixel, backside illuminated sensor manufactured by Omnivision (part OV2665-6s). Video after the break.%Gallery-93275%
One more thing... two iPod touch prototypes with camera briefly show up on eBay
Another day, another Apple leak. This time it's an eBay double whammy of the camera-donning iPod touch, which appears to be of the same design from August but now with iPod branding on the back. Better yet, the two devices bear the prototype identification codes "DVT-1" and "DVT-2" ("DVT" stands for "design verification test" in Apple-speak, according to Daring Fireball), while the DVT-2 model wears an extra bar code label seemingly stamped by the "Apple Development Team." What's interesting is that the model number "A1318" at the bottom matches the current iPod touch's, which may suggest the camera feature was ditched just before the current line went into mass production, or that we may see this variant as a minor update instead of a redesigned iPod touch in the coming months. We tried to verify using the FCC ID "BCGA1318," only to be let down by a kaput FCC database -- we'll give it another spin later. Unsurprisingly, the eBay listing was quickly taken down, but it's not like any mere mortal could've gotten much use out of that Transformer-themed (and familiar-looking) "SwitchBoard" test-bed software -- maybe it was a displeased Michael Bay who killed the auction. A couple of backside shots after the break. [Thanks, Sam]