How-to: resize your SIM, change your APN, and drink the sweet nectar of mobile freedom
Things used to be simple: you either had a CDMA device with no SIM, or a GSM device with a SIM. If your GSM device was unlocked you could swap SIMs between carriers, and if was locked, you could swap SIMs between accounts on the same carrier. Basically, an unlocked phone meant mobile freedom. At first, the only complication was the different frequencies used for GSM in different parts of the world, which was remedied with quadband radios. Then 3G was introduced, with different frequencies used by different carriers in the same geographic area, like North America. Today, this proliferation of bands makes it difficult to build universal radios, and makes it less appealing to switch carriers. In fact, the only phone that currently supports all 3G frequencies used in North America is the upcoming pentaband Nokia N8.
The second obstacle was the introduction of special data plans, either requiring additional service layers (such as BlackBerry or Sidekick plans) or restricting the types of devices permitted as the iPhone and iPad plans do. What used to be as simple as changing APNs is now a Kafkaesque nightmare, complete with nasty "you are using the wrong data plan and we are going to send you a bill" text messages from carriers. Strike three was the micro SIM (also known as the 3FF SIM), popularized by Apple's iPad and the iPhone 4. This smaller form-factor SIM is electrically compatible with the standard SIM we all know and love -- and as such, it's easy to convert a standard SIM into a micro SIM and vice-versa (but still, it's one more hurdle standing in the way of happiness).
Let's dive in and take a look at how it's done.
Cutting your standard SIM

Beyond band limitations and data plan restrictions, there are many reasons to convert a standard SIM to a micro SIM. The iPad is sold unlocked, and the iPhone 4 is (or will soon be) available unlocked in several countries, including the UK, Australia, and Canada. Both devices support 3G on most carriers worldwide, including AT&T in the US, Rogers / Fido / Telus / Bell in Canada, and 2G on almost all carriers around the world.
You may want to use these devices with an existing standard SIM -- and even if your iPhone 4 is locked to a carrier, you may want to use it with an existing standard SIM from the same carrier. The converse is also true: you may want to use the micro SIM from your iPad or iPhone 4 in a device with a standard SIM slot. Fortunately, cutting a standard SIM into a micro SIM is pretty simple, as illustrated in the video below.
All that's required is a standard SIM, a cutting board, a knife (kitchen or utility), scissors, a file, a template (ideally an actual micro SIM), some care, and some patience. The basic idea is to place the template over the SIM to be trimmed, carefully lining up the contacts, then mark the SIM at the edges of the template with the knife and cut along the scored edges using the scissors. Fine-tuning is achieved by filing the edges and corners of the freshly minted SIM and checking fit in an iPad or iPhone 4 SIM tray.
Always keep in mind that it's best to cut less than you have to and file off any excess than to over-cut and cry. A word of caution: we won't be responsible if you damage your SIM or yourself while attempting to follow these steps; your carrier can replace your SIM if you make a mistake, but can't replace your fingers. Alternatively there's a SIM punching tool, but it runs $30 or more to accomplish a task that you might have to do once or twice a year, if that.
Using your micro SIM in a standard SIM device
Now, say you've got your micro SIM -- the one you made, or the one you were provided by your carrier -- and you want to use it in a device that isn't an iPhone 4 or iPad. Using a micro SIM in a device with standard SIM slot only requires a simple plastic adapter. There's also a DIY solution (PDF) that uses discarded SIM packaging or a credit card, but it's more involved than the cutting method above, and the results are less polished.

APNs
Now that you know how to swap between standard and micro SIM devices effortlessly, it's time to learn about changing APNs. Many unlocked devices today auto-detect APN settings when a SIM is inserted, but if not, most support manual and / or OTA (over the air) APN settings:
- On an unlocked or jailbroken iPhone. Settings -> General -> Network -> Cellular Data Network
- On an iPad. Settings -> Cellular Data -> APN Settings
- On a locked iPhone. Point Safari to this website and select Continue -> Custom APN
- On Android devices. Settings -> Wireless & Network -> Mobile networks -> Access Point Names
Here's a comprehensive list of APNs for carriers worldwide. If you're in the US, check out the table below:
| APN name | Username | Password | |
| AT&T iPad | broadband | -- | -- |
| AT&T iPhone, BlackBerry, and other phones | wap.cingular | WAP@CINGULARGPRS.COM | CINGULAR1 |
| AT&T data modems, netbooks | isp.cingular | ISP@CINGULARGPRS.COM or ISPDA@CINGULARGPRS.COM |
CINGULAR1 |
| T-Mobile | epc.tmobile.com | -- | -- |
| T-Mobile (old, but still works) | wap.voicestream.com or internet2.voicestream.com or internet3.voicestream.com |
-- | -- |
| T-Mobile Sidekick | hiptop.voicestream.com | -- | -- |
And here's a neat trick: not only can you use a SIM provisioned for the iPad data plan in another device by converting SIMs and changing APNs, but in the US you can order a replacement micro SIM from AT&T, sign up for an iPad data plan, and manage it without purchasing an iPad. It sure makes getting that unlocked iPhone 4 a significantly more attractive proposition for those crazy data-centric users amongst us -- you know who you are.
























@MRCUR It may not come with the phone, but you can still do it with an everyday household item known as the "paperclip".
@MikeUK I don't think we ever got a "SIM Removal Tool" here in the US. At least I didn't get one with my original iPhone.
Looks like the weakness of this method would be that a lot of people only have a standard SIM, and don't have the micro SIM to use as a pattern...
@andysexton of course, if you've just bought a device that uses a micro-sim that might not be an issue, but I could see of some cases (buying a used device) you wouldn't have the micro-sim.
I wish the FCC or somebody would come in and say "every carrier has to use the same technology on the same frequencies, and every phone has to be unlocked."
That would be beautiful, but it'll never happen. *Sigh*
Once you've hacked your SIM you are still left with the 100 other restrictions that Apple places on your device. If you want or care about freedom then run screaming from anything iOS.
I'm not a proponent of the wild-west - some control is OK and can still be compatible with freedom - but what Apple has created is a little bit of tyranny in your pocket. Even if you cut your SIM.
Some of the older AT&T SIM cards are incompatible. The metal part is actually larger than a MicroSIM card. I had to switch my SIM to a newer model, then cut.
You are probably doing this so you can use an i4. When you cut your MicroSIM and put it in the i4's SIM tray, you will notice that the metal part touches the aluminum lip on the tray. This is one of the possible causes for a bad signal. Put a tiny bit of tape on the metal part of your SIM card that touches the SIM tray's lip, and you shouldn't have any problems. I was suffering from the "you're holding it wrong" bug, and now my i4 works perfectly.
@AhmedJaber You can still cut the metal part that you need to and there will be no harm to the SIM itself.
@coolbho3000
Metal part is actually a part of circuit board. You may damage the SIM or shorten its MTBF.
@AhmedJaber this is not an issue. These additional contacts are unused and can be cut. The actual chip is tiny and located in the middle under the contacts.
A question. I've iPad and how's it possible to get it on on other carrier by cutting the sim. Does any other carrier support iPad? I like the speed of AT&T 3G and 2 gb limit isn't bad either but I hope some other carrier comes with faster and cheaper plan.
@Raytem - In the US there are no other carriers to use with the iPad.
I just took the micro-sim from my iPhone 4, stuffed it into my ipad, (which doesn’t have a data plan) changed the apn under cellular data to the one listed above for att (wap.cingular WAP@CINGULARGPRS.COM CINGULAR1)
And I received data! Now I can just swap sims from my iPhone 4 when I want data on my ipad!
Great first post tnkgrl!! Hope so see more like this!
@grundy86 Hope to*
this Myriam Joire (tnkgrl) intrigues me
@DDRobert
word. Eccentric.
User: I want to get a SIM card
Seller: Do you want it uncut or cut?
@pika2000 - That's exactly why AT&T uses pre-perforated SIMs now.
Or you could just buy and inactive Micro Sim to unlock you iphone4 like here on ebay, it comes with a holder too.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180530764401&ssPageName=STRK:MESELX:IT
E
Awesome Post please keep 'em coming.
Awesome. I am so trying this with my TMobile sim card once the dev team release the new Ultrasnow to unlock the iPhone 4
Thanks for this post, just got shipping notification for my iphone 4 and was about to start researching exactly how to cut down my old sim.
Also glad to know I'll be able to swap it into iPad and not have to double up on data plans with my limited roaming data needs.
So what if you don't have a micro sim to measure with?
What I'd like to see is an article telling me how to use an Android device on my AT&T voice plan for WiFI+Voice only -- without AT&T sending me a little text saying they tacked on the $25/month data plan "for my convenience".
Yes, I know. Off topic.
@NinjaTaco Prepaid is all you need.
So question, I'm more than likely getting the streak, can I switch the sim from my 3GS to it and not encounter any problems?
Why don't they make them right in the first place?
Atleast within Australia, adding an APN to your sim on your handset wont give you the additional access.
The plan you sign up gives you access to certain types of APN, you can use any of those ONLY.
However even if you added an APN and it worked, you'd be billed accordingly.. so no real win there for me.
@SNip3D same here in the US - setting the APN only works if you have a SIM provisioned for the right plan.
drink the sweet nectar?
you mean kool-aid?
Glad to see tnkgrl on engadget. I like her views on technology. Plus she knows about Erase Errata!
Apple didn't popularize the micro-SIM, no one did, because its hugely unpopular.
And it is simply outrageous that they would feel the need to put a microsim in a device as humongous as the iPad, which is 35% hollow air-space inside the case. *facepalm*
Jon4lakers posted a video of a sim cutter tool which comes with the adapters as well.
Not sure if you are aware of this Engadget, but I always put down epc.tmobile.com when i want data from T-Mobile. I have never seen an instance where a person uses epc.t-mobile.com. Hope this helps.
@daisukeumon thanks for catching this - I fixed it.
this is what im talking about. engadget just got better. i myriam. shes the best.
Isn't a SIM card already small enough? What is up with a microsim?
Just so you know, you can change the APN settings without a special URL on a locked iPhone. I can go to Settings -> General -> Network -> Cellular Data and change the APNs there just fine on my locked, unjailbroken, standard 3GS.
@Maybach this is works on some carriers, but most locked iPhones (like with AT&T) hide the menu.
The APN portion of this article is misleading. You can not gain access to any APN you want simply by changing the APN on the device. Every SIM is paired with profile data on the network's HLR (subscriber database), in that profile the carrier can provision up to 8 PDP Contexts they want to allow access to. Each APN on the network has an associated PDP name. Generally all consumer smart phone devices will be provisioned with 2 APNs, one is WAP access, the other is NAT'd internet access. WAP access traverses additional network services like compression gateways, and WAP translators that change the content you request. This is intended for feature-phone minimal browser use, not your plan-avoiding smartphone. Blackberries and iPhones have additional APNs specific to those devices as well, for BB it's for PIN access into blackberry's service network, and for the iPhone it's for access to the VisualVoicemail services.
If the carrier did not add the PDP context to your profile, you will not get access to the APN. Also Carriers regularly validate WAP device usage to ensure that those expensive to run services are not being wasted on devices that do not need them. You may enjoy 'free' (no add on surcharge) access for a short while, but this will never last. If they really wanted to be jerks about it, it is also an actionable TOS violation.
@doog I mentioned that changing APNs requires your SIM to be provisioned for the right data plan. Look in the second paragraph of the post and the second paragraph of the section entitled APNs. I used the word provisioned a number of times.
Crawl around in the crevices of 'mobile freedom,' you mean. Some consumers you turned out to be.
All this makes me wonder what the APN settings are for the Kindle and the Nook, and if it's possible to perform this "SIM trick" using one from one of those devices.
@gandalf239 it's been tried, and although it's possible to get on the network, all traffic is proxy-ed via Amazon's servers so it's impossible to get direct access to the Internet.
@tnkgrl okay tnkgrl, I cut my T-Mo SIM, but it looks nothing like these.
That's still cool right? I mean it doesn't have to be a Cingular or AT&T SIM if I'm just unlocking anyway, right? I've got it in an Micro to Standard SIM adapter and my iPhone 2G finds it still, soooo... good?
Actually, Blackberrys only use the wap.cingular APN for media streaming, most of the time they use blackberry.net. This can be modified, but you will lose any blackberry specific features IE: BBM, push email etc.
This APN accesses the blackberry servers to provide those services.
Has anyone got a Rogers iPad SIM working in an iPhone 3G/S yet? I made an adapter, put the micro-sim in, and switched the APN settings via unlockit.co.nz but the status bar reads "No Service." The iPhone is locked to Rogers but the iPad SIM is also from Rogers...
Anyone else had luck?
@rumour I experienced the same problem while spending a week in Canada - listen to Engadget Mobile podcast #48 for more info.
@myriam Just checked out the podcast and it's interesting that somehow Rogers iPad SIMs are barred from being used within an iPhone. I wonder though if a Telus or Bell SIM would have the same result since they both don't have a special deal with Apple like Rogers. If you or anyone find out please post here and I'll try and I'll do the same