If you use intercooler fans connect them to an external power supple. remove intercooler,remove the three small screws around the socket,lift up the socket and cut the fan leads as close as possible to the socket without damaging the other leads,replace the socket.drill a small hole near the top corner for the power supply leads and conect {Brown/POS Grey/NEG}...A 1amp 12volt power supply,the fans will run on 6/9volt a with a lot less noise,depending on the amount of air you move.Try this if you won't to use the fans....Brian
The Rip is the latest addition to the Boogie eWriter line, devices that let you scribble notes and drawings and can be wiped away with the press of a button.
The most commented posts on Engadget over the past 24 hours.
Now that we've thrown 'em off the trail, use the form below to get in touch with the people at Engadget. Please fill in all of the required fields because they're required.
If you use intercooler fans connect them to an external power supple.
remove intercooler,remove the three small screws around the socket,lift up the socket and cut the fan leads as close as possible to the socket
without damaging the other leads,replace the socket.drill a small hole
near the top corner for the power supply leads and conect {Brown/POS
Grey/NEG}...A 1amp 12volt power supply,the fans will run on 6/9volt a with a lot less noise,depending on the amount of air you move.Try this if you won't to use the fans....Brian