polycarbonate
Latest
HTC One X gets teardown, battery unsurprisingly dominates
While some might deem the One X's combination of svelte unibody profile, quad-core power and 720p display to be downright witchcraft, we knew differently. Fortunately, there's now scientific proof to back us up, courtesy of PCOnline, which has performed a delicate autopsy on the Chinese variant of HTC's new flagship. To explore that polycarbonate shell, a narrow plastic tool to is eased in behind the screen and around the face of the device, with the majority of the phone's tightly packed innards -- including the Tegra 3 processor -- attached to the display half. Some contacts, however, were left on the inside of the unibody, including the NFC chip. Most of the quad-core thinking parts were clustered around the 8-megapixel sensor, while the battery dominated the center of HTC's big hitter. Anyone who gets their kicks from the gentle undoing of all that engineering hard work can watch it unravel in grisly detail at the source below.
Nokia Lumia 900 review
Nokia Lumia 900 official Nokia Lumia 900 to hit AT&T on April 8th with $100 price tag in tow (video) Nokia Lumia 800 review Long-awaited, heralded, longed for, lusted after, overdue, deal breaker, savior, second coming, dead-on arrival, revelation, last gasp, comeback, hail mary pass, flagship... finally! If that string of descriptors hasn't already tipped you off, Nokia's Windows Phone messiah has arrived stateside to either silence critics or give' em fodder for further nay-saying. Ensconced in a polycarbonate frame that's similar to the N9, the Lumia 900 on AT&T's LTE network is widely understood to be Espoo's first true stab at building a presence for a mobile brand that's ubiquitous everywhere but here. To understand the gamble the company's making with the Lumia 900, one need only look to another critically acclaimed, yet interminably stalled overseas import: Kylie Minogue. That foreign pop siren, a music industry veteran, has repeatedly failed to empty mainstream American wallets with her scattered hits, despite enjoying chart domination across the globe. Indeed the formula for US success is a fickle one. No matter the product category, the crossover membrane can sometimes prove too thick to permanently breach, often resulting in a "one and done" mentality marked by an inevitable retreat to more conciliatory European shores. For the time being, though, it appears that Nokia's going all in, ready to see its folie à deux with Microsoft through to the end. Indeed, with an irresistible on-contract price of $99, it would seem both parties are counting on this to be the mass market magic bullet they've sorely needed. So, can the Lumia 900, a single-core 1.4GHz handset hampered by a so-so 800 x 480 display, prove this tech alliance wasn't ill-struck after all? Can an attractive industrial design and simplified UI triumph over seemingly modest specs? Will Nokia end up retreating to its overseas kingdom? Abandon those fanboy caps all ye who tag along, as we put this Finnish smartphone under the hot lights.
Nokia publicly acknowledges Lumia 800 battery bug, promises fix in next update
Nokia's flagship Windows Phone may be a gorgeous slab of polycarbonate, but it's proving to meet its match with its own battery performance. It began with concerns about charging and overall battery performance as we reviewed the device, and the phone was given an update nearly a full fortnight ago to alleviate power management issues. We're still awaiting a maintenance release next month to take care of the charging portion of the problem, but it seems that yet another bug will need to be addressed at the same time. After word spread last week that something was causing the battery's capacity to show up as worse than it really is, Nokia did some digging and promptly admitted that something was awry. In the statement (found past the break), the company assured the masses that the battery itself was perfectly fine, but there was a bug in the software and a fix will be included in the next planned update. And then everything will be absolutely perfect... right?
Speck SmartShell iPad 2 companion case with magnetic strip enhances the Smart Cover
Today's Smart Cover-compatible iPad 2 backplate, the SmartShell, is courtesy of Palo Alto-based Speck and has a neat trick up its sleeve. Coverage Like many of the other backplate-type cases, the SmartShell covers the back and edges well. It has good sized cut outs for the ports, mic, buttons, camera and speaker, as well as a cut out in the side to allow you to lift up the Smart Cover a little more easily. It has all the important things covered, but that opening in the side could be a potential vulnerability. Thickness and material The case is made of polycarbonate and is available in six different colors including clear and looks pretty good once on the iPad. The majority of the case is just 1.2mm thick, meaning it's one of the thinner polycarbonate offerings available. At the edges, where the case meets the front of the iPad the plastic gets thicker and creates a noticeable edge around the smooth tapering of the iPad 2. Unfortunately there are also some sharp edges to the case, which feels cheap and makes the iPad uncomfortable to hold. This might be a one-off with our clear review unit, but it appeared to be a lack of finishing during manufacture, which we haven't seen with other polycarbonate cases in this class. Features The SmartShell has a nifty trick up its sleeve that we haven't seen in other backshell cases and that's a magnetic metal strip on the back side of the case that holds the Smart Cover in place then folded around the back. This is the kind of thing Apple should have built into the iPad 2 itself, as it removes the annoying flop of the Smart Cover when it's open and works wonderfully in the SmartShell. %Gallery-134782% Verdict The Speck SmartShell has good coverage, is pretty thin and comes in a decent set of colors to match your Smart Cover. The magnetic strip on the back is great and improves the Smart Cover no end. It's a shame then that the clear polycarbonate isn't as well finished as we would have liked, and those sharp edges that make the iPad 2 uncomfortable to hold aren't what we're looking for. Your mileage may vary and indeed the "matte soft-touch" finish of the colored cases may be different. For the clear cases we hope this is a one-off production error, but the rest of our review unit seems perfect so we can only conclude that it's cheap manufacture is to blame. If you can get one out in a store and check the edges, or buy it from an online retailer with a solid return policy, then the Speck SmartShell is definitely worth a look and will set you back around US$25-35 plus shipping.
SwitchEasy CoverBuddy iPad 2 Smart Cover-compatible backplate case
We had a look at a TPU-based Smart Cover-compatible backplate in the last in this series of reviews. Today we're going to be looking at one of the polycarbonate variety, the SwitchEasy CoverBuddy. Coverage The CoverBuddy has pretty good coverage for a polycarbonate case with all edges and corners covered. There are cut outs for all the important bits, the buttons, switch, ports, camera and mic, and of course a strip down the side for the Smart Cover to attach. The cut outs themselves are quite large, meaning you can get easy access to the bits and pieces, but it could also mean that they're left exposed. It's always a trade-off with a case and I think SwitchEasy have made the best of it here. Instead of a flat opening, the speaker on the back has a grill to let the sound out while still providing a modicum of protection. The case clips on with thin overlaps on the iPad 2's bezel that hold it in place, meaning it doesn't protrude onto the front of the screen at all. It's a good fit and does the job admirably. Thickness and material Being polycarbonate the CoverBuddy is slightly thicker than some of the TPU offerings we've seen before, but it is by no means thick at 1.8mm thin. The polycarbonate itself can be covered in either a rubberised coating or a scratch-resistant UV coat, depending on color of which there are 11 to choose from including UltraClear as shown above (check the gallery below for the Tan version). The UV coating feels especially nice in the hand and is smooth yet not slippery. The CoverBuddy is certainly well made and feels a cut above some of the rest with nicely rounded corners and good finishing at every edge, but as with all these thin cases, don't expect it to do much if you drop your iPad from any decent height. %Gallery-134887% Verdict The SwitchEasy CoverBuddy doesn't do much other than cover the back of your iPad 2 while letting your Smart Cover attach to the side, but in that respect it does it very well. It's unobtrusive, form fitting and the UltraClear case is especially good with a great finish. If you're looking for a good quality simple polycarbonate backplate for your iPad 2, the SwitchEasy CoverBuddy deserves to be near the top of your list for about US$25 plus shipping.
Proporta Hard Shell Back Cover Smart Cover-compatible iPad 2 case
Next up on the TUAW test bench is the Smart Cover-compatible Hard Shell Back Cover for the iPad 2 by Proporta, which is available in white or black to complement and protect your beloved tablet. Coverage The Hard Shell takes a more open approach to most of the back cases we've seen for the iPad 2. It covers all four corners, the bottom and the opposite side to where the Smart Cover attaches, but leaves the top of the iPad 2 totally exposed. This has the effect of giving great access to the headphones port, microphone and power button, but won't offer much protection if you happen to drop your iPad 2 on its top edge. Cut outs in the back for the camera, side for the volume buttons and switch, as well as the bottom for the dock connecter port and the speaker provide decent access. The bottom edge of the iPad isn't totally covered either with a thin strip of aluminium visible where the case doesn't quite cover the entire bottom edge. It's safe to say, if you're looking for all edges coverage, you can stop reading now. Thickness and material The Hard Shell is made out of polycarbonate with a rubberised coating, giving it a smooth yet grippy texture. The case itself is about 1.5mm thick and doesn't weigh much, so won't add much to the bulk or mass of the iPad 2. The polycarbonate will protect your tablet from scratches to the back for all the surfaces covered, but will offer minimal impact or drop protection, just like most of the cases in this class. %Gallery-134780% Verdict The Proporta Hard Shell Back Cover fits the iPad 2 well and feels nice to the touch, but doesn't cover enough of the edges for decent protection. It adds very little to the bulk of the iPad, so if you're looking for something to literally just cover the back when placed on a table, this back plate will do the job. There are better offerings out there for US$34 of your cold hard cash, but its lifetime warranty might entice you.
Graft Concepts Leverage protects your iPhone 4 with ease and style
We've seen a lot of iPhone 4 cases here at TUAW. Most thin polycarbonate or TPU cases are pretty much the same -- brute force them on to cover the back and sides. Graft Concepts have taken the thin-polycarbonate case form factor and added something a little different with a top locking latch. Thanks to the Graft Concepts team, we got our hands on a pre-production black and chrome version of their slick looking iPhone 4 case to put through its paces. Design The Leverage takes the form of a bumper-style case, which wraps around the side edges of the iPhone with cut outs for the ports and buttons. It is a single piece of rubberized polycarbonate that joins at the top, locked together by a fancy chrome latch with integrated power button push-through. The latch design makes it easy to get your iPhone in and out of the case, while still holding the case firmly and securely on your iPhone. It looks great just as a bumper, but the Leverage comes with an optional backplate insert that you can combine with the bumper to form a full case with a single cut out for the camera and flash. This modular design gives you the best of both worlds, and depending on your mood or how much protection you want to give your phone, it's really quick and easy to remove or replace the backplate. Protection The combined case gives pretty good all round protection, covering all edges and the back. The case also covers the front edge of the phone meaning that you can place it flat on the screen and the case will keep the glass off the deck. The plastic construction will also offer some impact protection, but I wouldn't fancy dropping it from too high as with most relatively thin cases. The case adds about 1-2 mm thickness to your iPhone, so it's not bulky by any stretch of the imagination. It's also quite grippy to hold, but thankfully doesn't suffer from too much pocket torsion when you're trying to pull it out of your jeans pocket. %Gallery-134226% Verdict Bearing in mind its pre-production nature, we like the chromed locking latch (that's also available in a matte finish), which gives it something a bit different in the design stakes and functions well in practice. It provides decent protection and we like that you can swap between just a bumper and a full back case in about 5 seconds. If you're looking for a case for your iPhone 4 in either GSM or CDMA flavors, then the US$60 Leverage is just a little bit different. If the production case matches the quality of the version we tested, the Leverage will be a great choice.
Element Case Formula 4 covers your iPhone 4 in style
Element Case, the folks that brought you the Vapor aluminium iPhone 4 bumper, have released a polycarbonate case built around a similar design aesthetic. The Formula 4 features the same shaped iPhone 4 edge-banding that the gorgeous Vapor uses and adds a protective back-plate that's covered in a sheet of carbon fibre. The top and bottom edges bulge out slightly, while the right-hand edge features a rubber Element Case branded grip strip. %Gallery-127713% The case is split into two halves. A top half that slides on and is most of the case. The removable bottom half slides off to let you dock your iPhone 4. When in use, the bottom half locks into place solidly and overlaps the top half just slightly, ensuring a good fit. The Formula 4 encases the iPhone completely while the camera, headphones port, volume buttons, mute switch, the dock connecter, power button and speakers remain accessible. The screen itself is left completely uncovered, however, with the case providing only a very slightly raised edge. If you want screen protection you'll have to invest in a screen protector or look elsewhere. Verdict Overall, the Element Case Formula 4 provides good looking, decent protection for the sides and back of your iPhone 4. It's not the thinnest of cases, with extra bulges at the top and bottom of the case, but it has decent ergonomics and doesn't add too much to the depth of the device. If you fancied the Vapor, but couldn't justify the price or were worried about the aluminium affecting signal strength, then you won't be disappointed with the Formula 4. It combines decent protection and solid design, which makes it a winner in my book. The Element Case Formula 4 is available for US$59.95 plus shipping.
Philips and O'Neill launch durable headphones -- shaka bra!
In what amounts to yet another co-branding marketing kerfuffle, Philips and O'Neill have teamed up on a foursome of so-called durable headphones. The Stretch headphones (pictured) are the toughest of the bunch, constructed from an ultra-durable, temperature-resistant, and awesome-sounding material called TR 55LX that boasts a surface hardness six times greater than the polycarbonate stuff found in most headphones. The Snug series boasts "bold graphics" and can fold flat, while the in-ear Covert buds brings an iPhone controller. Last, and apparently least, is the "stylish" Specked with tangle free cord. Amazing. All are said to have been tested by the "toughest O'Neill team riders." As proof, O'Neill is trotting out Jeremy Jones, Mark Mathews, and Ane Enderud to promote its new gear, presumably because they want to and not because they are contractually obligated under the terms of their respective high-paying sponsorships. Needless to say, these headphones aren't for you if you don't know who these people are or you lack the fragile hipster ego required to wear them. No prices were announced, but you can expect them to match the "premium" description when these arrive for retail in Europe and the US sometime this month. We did give Stretch a go for a quickie ears-on, and honestly, while the cloth cord was a nice touch and they do seem to be super rugged, we'd prefer that the team paid a bit more attention to the sound quality than the finish.%Gallery-101026%
MacBook strips off its polycarbonate unibody shell for the expected teardown
That thumbs up means exactly what you think, and just like all the other new MacBook (Pro) models, that "non-removable" battery in the new polycarbonate unibody MacBook is more of a guideline than an actual set of rules. iFixit's currently doing its traditional teardown process -- so far, other than the battery and hard drive swapping places, the internal geography looks about like its predecessor. Letting your eyes venture into forbidden territories is just a mouse click away at the read link below.
Polycarbonate MacBook to live on, be redesigned?
It might seem like Apple's been ignoring its non-Pro MacBook line lately -- even doing hardware updates on the sly -- but consumers haven't, and they've been lapping up that solitary SKU with unabated enthusiasm. No surprise then that Cupertino would have bigger plans on the horizon, and AppleInsider claims Apple's engineers are already hard at work on an "industrial design overhaul" for the humble 13-incher, with some configurations expected to come in under the current $999 price point. Great news if you're lusting after a Mac, but still want to be able to buy groceries -- right, Giampaulo?