(Re)locating your Mac mini's or iMac's headphone jack for easy access
Are you wishing for an easier way to plug in and unplug headphones from your Mac mini or iMac? There are a few ways to make it easier. You should be able to reroute the jack, allowing you to speed up your plug-in process.
The first solution, which only works on Mac minis, is to use two right-angle audio adapters. This will relocate access to the headphone jack to the front or side of your mini, allowing for much easier access. You can buy these for less than $4 each (you'll need two) at Radio Shack (or whatever it's called these days). You'll need to plug one into the back of your mini, while you'll want to plug the other one in to the other right-angle adapter. Once you've done this, you should be able to have an easy way to access your headphone jack.
The next solution, which works with both minis and iMacs, is to use a headphone extension cable to provide easier access to plug in your headphones. This offers a more flexible solution to this issue, allowing you to route access where you want it. These cables can be purchased for about $10, and can be found in many places. You can choose a shorter cable or longer one, depending on how you want to manage your cords and where you want access to the headphone jack.
Please note if you use one of these solutions, it will override the internal speaker in your Mac, so you might want to unplug the extension if you're not frequently using headphones. These solutions will also work for microphones, so if you frequently use microphones with your iMac or Mac mini, you can also access the port more quickly.
Yet a third approach is to use a USB audio adapter, which will give you a separate set of headphone and/or mic jacks plugging into your keyboard or USB hub, or at the end of a USB extension cable. These adapters are available from lots of manufacturers and range in price from $8 on up; Plantronics also ships one with many of its audio headsets.
Check out the gallery below to see an example of an extension cable in use:
%Gallery-70605%
How do you handle this inconvenience? Leave a comment and let us know!