ddr3
Latest
Intel's P35 "Bearlake" chipset gets benchmarked, reviewed
Those of you that have been itching to see just how well the first batch of Intel P35 "Bearlake" motherboards perform can now rest a bit easier, as the first reviews and benchmarks are finally starting to trickle in. From the looks of it, HotHardware is among the first to do the honors, getting their hands on Asus's new P5K3 Deluxe motherboard and some Corsair XMS3 DDR3 memory to go along with it. According to their findings, that combination delivered 2 to 5% boost in performance over its 965 counterpart across a range of applications, with the mobo also delivering some modest gains when loaded up with DDR2 memory. While that may seem like a relatively small bump in performance, HotHardware sees plenty more room for the chipset to grow, most notably with the addition of 1733MHz DDR3 memory. About the only downsides they could find are the DDR3 RAM's somewhat high latency and the high cost of the hardware for early adopters, although that's hardly a surprise. Those still craving some more details can hit up the link below for the complete rundown.
Intel's DDR3-friendly Bearlake chipset launching in a week
Get ready for the non-revolution: Intel has pushed forward the launch of its Bearlake chipset from May 27th to May 9th, which means everyone is prepping motherboards and DDR3 memory to join in the fun next week. Unfortunately, while there will no doubt be performance increases seen, DDR2's evolution in the high-performance area means DDR3 doesn't pack too much of a relative punch, and won't really pull away from current DDR2 speeds until it starts to hit 1.33GHz and 1.6GHz. Intel has publications under NDA until May 9th, but we're sure to see huge crop of benchmark results of Bearlake once the NDA lifts, and will prep our pocketbooks accordingly.
EVO: Phase One promises to touch down in October
Having been burned oh so many times by the notorious Phantom from Infinium Labs -- perhaps the most infamous piece of vaporware this side of Duke Nukem Forever -- we're more than a little skeptical of any company that comes out of nowhere to offer a "media entertainment console" targeted at gamers. And we're even more skeptical when that company -- in this case, Alabama-based Envizions Inc. -- claims to have been showing off their console at a major trade show that we attended -- in this case, E3 -- but somehow managed to keep it under our radar. We're still going to give the so-called EVO: Phase One the benefit of the doubt, though, as Envizions has just announced October 20th as a solid North American release date for what seems to be little more than a souped-up media center PC out of the box -- although the unit comes with one wireless controller, it will only "have console-like features upon future upgrade applications and hardware assistance." Not a good sign. For $680 you're supposedly getting a machine with an unspecified processor and RAM configuration (also a bad sign) along with a 500MHz Sapphire Radeon X1600 Pro graphics card sporting 128MB of 800MHz DDR3 RAM, a liquid cooling system, and oddly enough, a built-in fingerprint scanner (to protect all of your valuable saved game-states, perhaps?). Again, we'll wait until October to pass final judgment here, but lets just say that we're not going to be the ones throwing down $25 to place a pre-order. Keep reading to check out some of the company's over-the-top marketing, direct from CEO Derrick Samuels' MySpace page...[Via IGN]