Benjamin Heckendorn
Articles by Benjamin Heckendorn
How-To: Build a 'Guitar Hero' foot pedal controller
Benjamin J. Heckendorn returns from a vision quest of Xbox 360 laptop-building and Jasper-hunting to share a new how-to project with Engadget readers. In this episode, he'll describe how to build one of his Guitar Hero foot pedal controllers, which allows those with physical limitations to play their favorite guitar rhythm games using a foot pedal! Read on for the complete how-to.
Inside an Xbox 360 Jasper: Ben Heck dissects the mythical console, then tells you how to find one
"Gentlemen! I give you... JASPER!" [lightning crackles, thunder sound FX] Ace modder Benjamin J Heckendorn (aka "Benheck") has found -- and immediately dissected -- an Xbox 360 Jasper. As widely reported, it was inside an Arcade unit. In the following story, he not only details what he finds inside, but will also clue you in on how you too can find this model on store shelves. Read on for the exclusive Engadget look at the guts and the glory!
How-to: Make a PS3 Laptop of your very own (part 1)
You may not have the disposable income to take home our one of a kind PS3 Laptop (which is still up for charity auction!), but that doesn't mean you don't have the time or wherewithal to build one of your own. Which is why we've asked our man Ben Heck to show everybody how he built the thing for the benefit of independent modders everywhere. In this installment we'll take apart the PS3, identify the parts within, and then reassemble them in a more compact way. We'll also install a USB breakout cable and take a look under the mammoth heatsinks and pipes. Read on!
How-To: Make an Xbox 360 Laptop - part 3
Alright after a break we're back with part 3, the final installment in this Xbox 360 "How-To" series. Today we'll be wiring up the LCD screen, installing the parts into the case, modding the keyboard and attaching all latches and USB ports. The end begins...Notice: Just to clarify, this article refers to the original Xbox 360 and does not cover the Elite, as Ben has yet to crack one of those bad boys open.
How-to: Make a PS360 controller
One of Ben's most popular hacks recently was the PS360 controller, a SIXAXIS modded into an Xbox 360 controller's shell, crashing his site not once, but twice upon its release. This project resulted in a lot of requests to duplicate this mod, showing either a very universal disdain for the PS3 controller's decade-old shape, or some strange obsession with the Xbox 360's chubby, winged form. Unfortunately. Ben didn't have the time to meet all these requests (plus he charges an arm and a leg), so we asked him to show you How-To build your own PS360 controller. It's not terribly difficult, just takes some time, elbow grease and, of course, lots of hot glue. Let's get started!Note: This is an intermission project, part 3 of the "How-to: Make an Xbox 360 laptop" will be returning next week.
How-To: Make an Xbox 360 laptop (part 2)
We're building an Xbox 360 laptop -- exciting, right? In part 1 of this series we covered removing ports from the Xbox 360, and rewiring both the DVD and hard drive. Now today in part 2 we'll get to the meat and potatoes of the case design, heat sink modification, the start of the case construction and the hacking of the LCD monitor and power supplies. Ready to rumble?
How-To: Make an Xbox 360 laptop (part 1)
The making-of How-To for the Xbox 360 laptop will be in three parts. In today's segment we'll discuss the parts list, stripping down an Xbox 360 motherboard, and modding / reattaching the DVD and hard drives. The next installment will cover case design, construction and hacking the LCD display, as well as wiring the video. Part 3 will then describe wiring all the separate parts together, troubleshooting, and finishing up the unit. Full design files will be including along the way. Let's take a look and prep to get started!
Xbox 360 Laptop mk2
Behold, the Xbox 360 Laptop mk2! It may look a bit like its first generation sibling, but don't be fooled. This Xbox laptop is a bit thinner, significantly lighter, and has some essential upgrades if you're gonna build one yourself. You are going to build one, aren't you? Because that's the best part about it -- we're going to show you how to make one of your own in the coming weeks with a three part How-To series. We'll describe, in detail, the steps necessary to fab an Xbox laptop, and if you're extra nice we'll even provide some original technical files and drawings. But play before work -- check out the photos (below) and videos (after the break) of the Xbox 360 Laptop mk2!%Gallery-2614%
How-To: Make a solid-state A/V switcher
Ben's Solid State A/V Switcher. Comes in any color you'd like as long as it's black. As you probably recall we recently had several articles on the Wii laptop which, of course, has Virtual Console game emulation. But what about people who'd prefer to have, say, every system they own hooked up all at once to one TV? Or a full-featured standalone DVD player and an Xbox 360, both using component video? This can become problematic input-wise, but not if you have a solid state A/V switcher! While "solid state" may bring bring to mind electronics from the 60s (or, in some cases, yet-unreleased flash hard drives), but in this case it simply means the actual switching is done with circuitry, not mechanically. Ironically, the circuits are activated with a mechanical switch, but they could be controlled electronically if you were so inclined. In this How-To we'll show you how to wire up your own A/V switcher which you can expand and use any way you'd like, for composite, S-Sideo, component, even VGA signals. Sure, you can buy a newer, really expensive TV's with multiple inputs (even component), but for those of us whose credit cards aren't quite up to that challenge, more inputs for less cash would be rather desirable. Let's get started!
How-To: Make a Wii laptop, part 3 - the final installment
Ok, we're back again for the thrilling conclusion of how-to make your own Wii laptop! In today's final installment we'll cut the case for the laptop, install all the parts, attach the screen and sound amplifier, and then connect everything together. Hopefully the extra detail [which, Ben tells us, is far beyond what he usually provides on his own site. -Ed.] will give you a good insight into how these devices are created and provide inspiration for your own personal hacks.Be sure to check out part 1 and part 2 of this guide (as well as the launch gallery itself); now, without further ado, let's finish this thing!
How-To: Make a Wii laptop, part 2
Hello and welcome back! Last week, in part 1 of this amazing saga, we took apart the Wii, modified the heat sink and desoldered large parts off the board. Today, in part 2, we'll reattach some vital components, mount the disc drive back onto the motherboard and create a case design on the computer. This will prepare everything for part 3, where we'll make the casing and install everything into it. Move out!
How-To: Make a Wii laptop, part 1
Last week we showed Ben Heckendorn's Wii laptop to the world (as I speak of myself in the third person). In today's How-To, part 1 of 3, we'll describe how this mod was accomplished, starting with the disassembly of the unit, initial computer drawings, and "reworking" of the heat sink.A week from now, part 2 will cover the rebuilding of the Wii internals as well as the design of the case. Finally, part 3 will cover cutting and building the case and installing everything into it. Let's take a look!
The Wii Laptop!
It's the Wii laptop! We spent the last few weeks (including much time spent over the holidays evading relatives) slaving over this bad boy and finally it's complete. Check out the features: 16:9 widescreen LCD, 7-inch diagonal. Stereo sound Gamecube controller port Built-in short range Sensor Bar Ports for using original Sensor Bar and A/V output jacks (for use on external display) Built-in power supply and compartment for power cord Dimensions: 8.5 x 7.7 x 2-inches Starting next Tuesday we'll be doing a multi-part How-To with detailed instructions for building your own Wii laptop, as well as loads of photos of the construction process. But for now check out the gallery for more detailed photos of the unit, and click on to see some video of the Wii laptop in action.[Big ups to our man Ben Heckendorn! -Ed.] %Gallery-1252%
How-To: Design a robotic hand - a vector art CNC tutorial
Every so often, that console-modding Benjamin Heckendorn wanders away from his lair at benheck.com to share some interesting projects with Engadget. In the past Engadget's very own Will O'Brien has demostrated how to build your own CNC (computer numericial control) cutting machine, and he also plans future articles on this subject. Searching the internet, you can't swing a nunchuk without hitting plans for "do it yourself" CNC machines, motor kits being sold, etc. A CNC machine is truly one of the ultimate projects a hobbyist can build and one of the best tools to have in a shop when finished. Yes, even better than a speed square. However, while much is said of what you can cut with such a machine, the how part of design creation isn't always as clear.For today's How-To we're going to go through the process of designing a somewhat complex item that can be cut with a standard 3 axis homebuilt CNC machine: a jointed "robotic hand". This requires several design methods drawn in multiple views, which will demostrate many of the techniques that are useful in preparing items for CNC cutting. At the very least it's a good primer for vector artwork in general, if you've ever been curious about it. So let's take a look at what's involved in prepping our CNC robot factory, shall we?
How To: Consolize an arcade game
Every so often, that console-modding Benjamin Heckendorn wanders away from his lair at benheck.com to share some interesting projects with Engadget. If you're like us, you probably have many fond memories of playing arcade games in your younger days. As the years passed the consoles became the most advanced machines available and arcades faded from the limelight, eventually popping up only as the occasional deer-slaying simulator or 500th version of Golden Tee.In this How-To we're going to describe the method by which you can take old arcade motherboards, easily attainable on eBay, and "consolize" them for use with a standard TV and controllers. Many people are satisfied with emulators such as MAME, and while they're become better and even more legal (thanks to the recent "abandonware" legislation) you still can't beat the real deal. Certain arcade machines, such as the Neo-Geo, are great choices for this project because you can actually plug new games into the hardware using the cheap and plentiful "MVS Cartridges."Another benefit of this project is that it can start you on the path to building one of the coolest home accessories around -- your own arcade machine! Since you can use a cheap standard TV instead of an expensive RGB arcade monitor it'll cut much of the cost out.Alright, let's get started on this puppy!
Mini How-To: Make a tool to breach Nintendo's security screws
Our hackmasters Will O'Brien and Ben Heckendorn weren't satisfied with their one-slot-per-week How-To gig, so we had to come up with a new way for them to get the word out about some simpler hacks and projects. Enter the Mini How-to. Mission: Possible.We've all seen them before, the weird inverse Torx styled Nintendo security screws. Sure you can -- gasp -- SPEND MONEY buying a special bit for them on eBay but it's pretty easy to hack your own tool for the job. In this mini how-to we'll show you a couple of ways to do it. Today's the day many a Nintendo fan has been waiting for. Many of you are probably waiting in line for your Wii right now -- so let's crack these Nintendos open! One of the aforementioned "screws of doom" on the bottom of a Super Nintendo. If you had no concerns what people thought of bad puns you could call it the "Locked SNES Monster" Oh crap we just typed that didn't we?
How-To: Turn a standard Xbox 360 video cable into a VGA cable for make benefit your wallet
Every so often, that console-modding Benjamin Heckendorn wanders away from his lair at benheck.com to share some interesting projects with Engadget. Recent Xbox 360 updates have allowed the system to spit out resolutions up to 1080p, and with the new HD DVD add-on drive there's more reason than ever to use a high quality VGA signal instead of the more standard 3-cable component. However there's a bit of a catch -- VGA cables for the 360 cost about $40. According to my calculations, that's about 2 pizzas and a case of beer less to game with. WE don't know about you, but we find that a pretty scary proposition -- yours buddies that swing over for game night probably do too.In this How-To we'll describe how you can turn your existing Xbox 360 video cable into a "multi-out" device capable of VGA. You don't even need to hack inside the Xbox itself, just the cable. Total cost is around $7, including the Radio Shack project box shown above. Ready to save some cash? Let's get in there!
How-To: Craft an analog control stick for your Sony PSP (part 2)
Every so often, that console-modding Benjamin Heckendorn wanders away from his lair at benheck.com to share some interesting projects with Engadget. A couple weeks ago we showed you, the teeming PSP loving masses, how to attach a standard analog stick to the embattled portable. Now join us for part 2 where we construct a case for the analog stick and create a convienent way to clip it onto a PSP. With a little luck you'll be able to look as cool as the loser shown above! So get your hot glue guns fired up and let's do this thing!
How-To: Analog control stick for your Sony PSP
Every so often, that console-modding Benjamin Heckendorn wanders away from his lair at benheck.com to share some interesting projects with Engadget. History is littered with game systems using far-too-stubby of controller sticks. From the Intellivision's "disc of doom," to Coleco's "shaft of stiffness" (quiet, you!), and even now, in this high-tech age, the Sony PSP's "sliding nub of death." It's unfortunate that the PSP is saddled with that thing -- it's a pretty slick system otherwise, with a library of almost 5 games! (Please don't key our cars.) Well what if you could augment that sliding nub with something more useful, like an actual analog control stick? Well now you can!In part 1 of this article we'll show you how to wire up an analog stick (from a PS1 / PS2 Dual Shock controller or an original Xbox controller) to your PSP. It's a lot easier than you might think. In part 2 (coming soon) we'll walk you through making a swell "clip on" joystick enclosure for the stick (or you can simply roll your own in the mean time). Ready to do this thing? Get in there!