sdv
Latest
Four tuner firmware update for Cisco Tuning Adapters rolling out
With less than two weeks to go until the very same FCC requirement (FCC-10-81) goes into effect, a Cisco Tuning Adapter in the wild received the F.1402 firmware update that upgrades it from double to quadruple duty. This is fantastic news for those who already have a Ceton InfiniTV 4 on a system that uses Switched Digital Video, as it will eliminate the need for one more set-top box, but should also be good news to the company who formally requested CableLabs change the spec to require four tuners in the first place; TiVo. No way to know exactly when this firmware update will roll out, but we're sure we're not alone when we say we hope it brings some much needed stability along with it.
The FCC changes the CableCARD rules, but not dramatically
The long awaited rule changes pertaining to CableCARDs that was originally proposed in the FCC's Broadband Plan finally got some resolve today, we have to say we're not convinced things will get that much better. While the FCC failed to kill Tuning Adapters or make the CableLabs certification process any less painful, it did make some changes, which include: CableCARD fees have to be the same for everyone, no matter which package you have. If your cable company allows any self installs, they must allow CableCARD self-installs. Cable companies must support SDV for CableCARD users -- this was implied before, now it is black and white. By default, all new deployments must be M-Cards (unless you actually request a S-Card). Cable companies can include an IP interface in set-top-boxes lieu of a 1394 port. One way HD boxes without CableCARDs are no longer forbidden and they don't require IP interfaces. Obviously nothing is as simple as six bullet points and there's much more detail in the 59 page order, so click on through for our interpretation of the nitty-gritty or hit up the PDF source and go nuts.
Poll: Will the FCC make any meaningful changes to the CableCARD rules this Thursday?
With less than a week to go until the FCC's meeting on the proposed CableCARD rule changes, we want to know, will the FCC make any meaningful changes to the CableCARD rules this Thursday? Sure CableCARD hasn't lived up to its purpose in life, but it has helped thousands break free of their provider's DVR. And while we all look forward to a full featured solution that will work for the masses, personally we're holding out hope that the FCC will make some changes that will make life easier for CableCARD using consumers now. %Poll-53999%
A war of good and bad is raging before the FCC over CableCARD rules
A war has been raging in front of the FCC these past few weeks with judgment day coming later this year. The FCC wants to move beyond CableCARDs but wants to make the best of it for all those consumer who have already bought into the technology by making some changes to the rules in the interim. The battle isn't as fun or exciting as Jacob vs The Man in Black, but all the companies we love and hate are involved. Reading through the comments makes it very easy to see which companies consider us their customers and which know we have little choice but to buy their service. Basically TiVo and the rest of the consumer electronics industry supports the new changes while the NCTA, its members and suppliers think it is unnecessary because things are just fine the way they are. The biggest item of dispute is if Tuning Adapters are working or if a new solution is needed. On one hand the NCTA says they work just fine and on the other TiVo, the CEA and many individual commenters, say they don't and that a IP back channel would be more reliable, cheaper and easier to support. The only problem the NCTA does see with the current rules is that CableCARD host devices cost too much so the FCC should let them deploy cheaper boxes with integrated security -- we say let 'em do it, just as long as CableLabs starts certifying two-way 3rd party devices too. At this point the comment phase of the process is complete and we all have to wait for the FCC to announce when it'll vote one way or another -- although we expect the vote to happen this Summer if the FCC still intends to implement the changes this Fall. If you want to know who was saying what, click through for our interpretation of the comments.
Cox 'Plus Package' brings advanced Trio UI, 500GB multiroom DVR and more HD channels
Cox is ready to make a major leap forward in its user interface -- goodbye SARA and Passport, we won't miss you -- with the newly developed "Plus Package" rolling out in limited areas during Q2 and throughout its service area by the end of the year. For the hardware Cox is bringing a Whole Home DVR solution to bear based on a Cisco 8642 HD/DVR with 500GB (3x more than the sizes currently offered) of storage, and MoCA-connected 1642 HD receivers, which are also necessary to tune to the new HD channels on the way delivered over Switched Digital Video (SDV) in the 860-MHz band. The star of the show however is the new "Trio" program guide (video embedded after the break), a 16:9 interface that spaces out program info over three panes -- channels on the left, programs in the middle, details on the right. TV programs can also be sorted grid-style, by themes, HD-only or favorite channels, while VOD lists titles, box art and detailed info in the three window style. There's personalization for up to eight members of a household, as well as TiVo-style suggestions and related programming searches based on metadata. An exec told Multichannel News the new tru2way-built software started by realizing that "our guides were, in fact, broken" and this all-new approach is a step towards fixing that. Besides the TiVos and Moxis of the world, other service providers with similar setups include DirecTV, FiOS, Dish Network and U-verse and while we'd definitely like to see that middle pane expanded a bit to show more of each title, Cox could be the first cable company offering a set-top box that actually competes with any of them. %Gallery-92661%
A CableCARD replacement is due by December 2012, bandaids by this Fall
While most of the FCC's new Broadband plan has been about, well, broadband, there's also some great news for HDTV fans. We expected a few mentions about CableCARD and its future when the FCC requested comments and declared it a failure, but we're still glad to see that the FCC listened to consumer electronics companies like TiVo and Sony -- among others. The biggest news is that the FCC has asked the industry to come up with a residential IP gateway that is open and that will provide same abilities as your provider's equipment, and most importantly, it should enable the very same gear to work no matter what type of service you prefer, whether it be satellite, cable or fiber -- for example, via various gateways the same TiVo would work with either DirecTV or Comcast. But while the FCC has given the industry until December of 2012 to define and deploy these IP gateways before implementing an "appropriate enforcement mechanism," in the meantime the FCC wants to see the biggest issues with CableCARDs resolved by this Fall. The list below of immediate fixes is pretty impressive, and other than the persistent lack of video on demand support, it'll help make CableCARD a pretty respectable solution. Ditch Tuning Adapters and let devices with Ethernet ports communicate upstream via IP to tune SDV channels. If a customer has a CableCARD in their leased set-top box, it must be reflected on the bill like any other CableCARD would. If the provider offers a self install for leased set-top boxes, they must also allow self install of a CableCARD. Software shouldn't require the same CableLabs certification hardware does.
ATI DCT Firmware update pops up on Windows Update, DRM-free MCE recordings & SDV are a go
Microsoft delivered the first half of two promised ATI Digital Cable Tuner-related updates as the 1.19.12.09050155 firmware update is now available from Windows Update (listed with the optional udates) that will relax the way it handles DRM on its recordings and add support for Switched Digital Video. With the new update applied, all Copy Freely-marked programing will be recorded without DRM allowing you to move it between PCs, convert it to another format or whatever you wish with ease, however as our hands on experience with the new firmware indicated you'll still need your cable provider to pass along the right bits to make it all operate properly. Still waiting in the wings is the Advisor Utility that will allow Digital Cable Tuners to work with any PC, no OEM purchase or hacking skills required. [Thanks, Rob]
Curious about SDV and Copy Freely support in Windows 7 Media Center?
Look here, bub. Do you own an ATI Digital Cable Tuner? Has your Windows Media Center PC been waiting for a firmware update, since like, forever ago? If so, you should already know that SDV and Copy Freely support has been added to Windows 7 Media Center, which is the software coding equivalent of all of your dreams coming true. Of course, getting used to all this new functionality is a daunting task, but that's why Engadget HD is breaking things down to make it fit for digestion. Ready to get schooled? Well, head on over!
A first hand look at SDV and Copy Freely support in Windows 7 Media Center
If you have a ATI Digital Cable Tuner connected to your Windows Media Center then you've been waiting a long time for a firmware update. In fact, although updates were released fairly steadily during the first year of the product's life, the last update (1.17.1) was dated April 30th 2008. But this long delay has been particularly painful because this is the first update since CableLabs relaxed the DRM requirements last Summer -- it's also the very same update Microsoft has been touting since CEDIA 2008. So what took so long? We'd like to know, but one thing is for sure, CableLabs sure took its time in the approval process as the date on the firmware is May 1st 2009! Better late then never, so while you wait for the public release click through to find out what all the fuss is about.
Hands-on with the Ceton CableCARD tuner
We learned all about it this new tuner first thing this morning and were very pleased to see a "technology preview" of the card in action at the Microsoft's booth. As expected, it is a single PCI-E card that uses one multi-stream CableCARD and offers the ability to record four HD channels at once. The tuner shows up as a single network adapter in Windows and still uses UPnP like the currently available ATI tuner does. The configuration and diagnostic interface included tabs for each individual tuner and apparently two Tuning Adapters -- unfortunately there wasn't a working demo of the SDV tuning in action. And in case you are wondering, we did ask about the price and as you might expect we were referred to Ceton for specific product questions. We do already have an appointment with them tomorrow, but we'd be surprised if they were ready to tell us. %Gallery-72441%
Ceton CableCARD PC tuner details emerge
There's no press release or anything, but an eagle eyed blogger noticed that the FAQ for highly anticipated multi-stream CableCARD tuner for Windows Media Center on Ceton's site has been updated. Among the new details is the fact that there will be multiple offerings -- as apposed to just the one version announced at CES -- which will include 2, 4 and 6 tuner versions. The card has also been adapted to work in a low-profile PCI-E form factor, but no word if all three iterations will be available in the shorty version. The bad news is that the new release date has been pushed back from 2009, until the first quarter of 2010. Of course the new tuners also won't be restricted to the OEM requirement and will of course work with Tuning Adapters to add SDV support. The quad steam version is currently geting its stamp of approval from CableLabs so it'll be out first, but we're very saddened to tell you that there is still no word on the price. While we wait for price and availability though, you can look forward to our hands-on just as soon as we work our way to the Microsoft booth at CEDIA.[Via GeekTonic]
Windows Media Center is set to thrill at CEDIA 2009 next month
Everyone likes to try and predict the future and with the Custom Electronic Design & Installation (CEDIA) show only a month away, the crew at Engadget HD threw all of their crazy ideas out there for your reading pleasure. For the most part all of the predictions are around Windows Media Center and how it will integrate with other products like the Zune HD, Digital Cable and HD satellite services, but there are some other fun things throw in. We really believe that this is going to be the year that Redmond brings everything together, so if you're the type who doesn't think it'll ever happen, then click through to find out why we think you're wrong. Either way, you can expect we'll be on the scene in Atlanta to check out what's new first hand.
CEDIA 2009 Windows Media Center predictions
With the Custom Electronic Design & Installation show in Atlanta only a month away, we thought it'd be fun to try and predict the future by laying out our expectations for Windows Media Center. The way we see it, CEDIA is the perfect launching pad for Windows 7 Media Center. For starters it is just over a month before the official release of the OS, but more so because Microsoft has used the venue in the past to announce new Media Center features. We really believe that this is going to be the year that Redmond brings everything together, so if you're the type who doesn't think it'll ever happen, then click through to find out why we think you're wrong.
The Moxi Summer update brings the Moxi Mate, SDV support and more
All the Moxi owners out there should be happy to learn that Digeo intends to keep its promise by continually releasing updates to Moxi HD DVR on a regular basis. The latest Summer update should hit your Moxi in the next few days and brings some of the more anticipated features -- no still no TiVoToGo like functionality -- like the grid guide pictured above, support for the Moxi Mate and Switched Digital Video (SDV). First up is SDV support, but while adding the ability to tune channels delivered via SDV is appreciated, it really falls under the "about time" category. Next is the new Moxi Mate, which holds more promise but just because it starts shipping tomorrow for $399, doesn't mean it will deliver. As it stands now, the Mate requires that you bring your own network connection to your second TV -- so no MoCA support like FiOS and other cable operator DVRs work -- and it doesn't completely replace the STB in your bedroom because it doesn't do Live TV and you can't schedule recordings with it. You can at least pick up where you left off watching a record without transfering it first, but the included remote can't control your TV's channel or input, so you're going to need a universal remote or you're going to make life in the bedroom as complicated as some living rooms. Our last gripe about the Mate (yes there's more) is the fact that Digeo only recommends running one Mate at a time with a hard limit of three concurrent streams. The good news though is that existing Moxi HD DVR customers can pick up a Mate for $199, and there're even package deals and payment plans to lesson the blow. The breath of fresh air coming with this update is the fact that up to 6TB of external storage is now supported and DLNA support is improved with added codec and containers like H.264 in MKV files -- although obviously MKV can support all kinds of codecs that may or may not also be supported.
HD 101: What is ATSC, PSIP, QAM, and 8-VSB?
Once you buy an HDTV it doesn't take long before you get confused by all the acronyms. We love us some HD, but the days of simply bringing a new set home and plugging into a coax cable are long over -- at least for most. It is pretty obvious by the latest surveys that most people don't understand exactly what it takes to enjoy HD on their HDTV, but even if you do, you may not understand what most of it means. Now while this isn't the typical make sure you have your HDTV configured to watch HD post, it will help you understand the different ways HD is delivered.
Cisco STA1520 SDV tuning adapter impressions
Cox grabbed some early SDV headlines by promising to supply its Phoenix-area TiVo customers with free tuning adapters, but it only recently made good on the deal in our central Phoenix location. Since the initial announcement, other cable markets -- both Cox and other providers -- have already delivered tuning adapters to users. Based on our poll, it seems the Tuning Adapter rollout is still in the early stages even though we feel like we've been waiting for a long time. Better late than never, though -- last week we got a letter indicating that our Tuning Adapter was ready for pickup at the local Cox office, thankfully still gratis. For our troubles, we got a Cisco (Scientific Atlanta) STA1520 that the Cox representative made abundantly clear was free only as long as we stayed a customer. Follow us past the fold to see how the rest of our Tuning Adapter experience shaped up.
Tuning Adapters coming to Windows 7 Media Center?
Media Center fans with ATI digital cable tuners that use CableCARDs have felt pretty left out recently as all the TiVo owners have been getting their hands on Tuning Adapters, and thus access to all the SDV delivered HD channels they pay for. Well it appears there may be some good news on the horizon. We were listening to one of our favorite podcasts -- no not that one, or that one or even our own -- by Derek Flickinger who is a foremost expert on everything Media Center, and at about exactly the 40:00 mark he let a little bit of inside information slip that we've been waiting for. According to DrFlick, the next version of the ATI Digital Cable Tuner's firmware-- the same one that is supposed to reduce the DRM -- will enable support for the Tuning Adapter (all though he actually called them by their old name, "Tuning Resolver") in Windows 7 Media Center. Once upon a time there was a little debate as to whether these devices would even work with OCURs, but now it seems that it just a matter of time.
Poll: Have you received your DTV tuning adapter?
We've received reports from one side of the country (New York) to the other (Hawaii) from locals that have just received their long anticipated DTV tuning adapter. This week's poll question is quite simple, really: have you received yours? If so, how long did it take to arrive, and what carrier are you using? If not, chime in below with how long you've been waiting, where you are and what operator is being lazy on you. %Poll-25790%
Cox subscribers in Northern Virginia now receiving tuning adapters
Cox Communications was one of the first cable carriers to openly admit that it would be handing out tuning adapters to those negatively affected by switched digital video implementations (read: CableCARD users) sans a fee. Now, it seems like the floodgates are officially open across the industry. On the same day that TWC users in Austin, Texas began scooping up tuning adapters of their own, we're seeing multiple reports from Northern Virginia that consumers are finally able to claim one from their local office. It doesn't seem as if installation is totally a breeze for everyone, but Cox has evidently trained its CSR staff to handle quirks quickly judging by positive vibes felt on the TiVoCommunity boards. Moral of the story? Your carrier just might have a TA with your name on it, but you may never find out without giving 'em a ring.[Thanks, Phillip]
TWC now handing out tuning adapters in Austin, Texas
We knew that Time Warner Cable was allowing customers in various regions around the country to pre-order their tuning adapter, and tonight we've received the first report of delivery. For those out of the loop, these free adapters enable CableCARD users to tune into any channel that's delivered via switched digital video (SDV); without one, your current TiVo (for example) won't ever be able to see any channel beamed out with the new technology. The lucky locale is Austin, Texas, but we get the idea that other places should be seeing them soon. Give your local TWC office a call, and do report back (bonus points for images) if you've found that your city now has 'em as well. [Disclosure: Engadget is part of the Time Warner family][Thanks, Andy]