PlayStation Move gets broken down -- so easy, an end-user could do it
Another week, another well-detailed tear down from the kids at iFixit. Blessed with an eight out of ten on the repairability index, the PlayStation Move was said to be one of the easiest devices yet to break down and reassemble, so there's a good chance that any novice DIYer with a steady hand and a Phillips screwdriver could accomplish what's shown in the link below. No huge surprises were found once the PCB's clothing was removed, but we were told that the Move controller contains a great many components that are found in today's modern smartphones: a processor, accelerometer, gyroscope, Bluetooth transmitter, vibrating motor, and even a MEMS compass. The sphere at the top can flash any color thanks to the included LEDs, and the integrated Li-ion battery can be disconnected (and thus, replaced) from the device without any soldering. Hit the source for the nitty-gritty, and hop on past the break for the highlights. Oh, and as a reminder, you can grab your own Move starting today if you call North America home.
* The Wii and PlayStation use different methods of locating their controllers. The Wii Remote has an infrared (IR) sensor built into the controller, and uses triangulation from the IR emitters on the sensor bar placed near the TV to locate itself. PlayStation Move, unlike the Wii, can locate the motion controller in 3D space. The PlayStation Eye camera visually recognizes the X/Y position as well as the relative size of the glowing sphere on the motion controller to pinpoint the controller's location.
* The Move contains many of components found in today's smartphones: a processor, accelerometer, gyroscope, Bluetooth transmitter, vibrating motor, and even a MEMS compass. It's an amazing amount of tech for the money, even though we still think it's steep to pay $50 for a controller. Compared to a $40 WiiMote, though, it's quite the bang for the buck.
* The sphere at the top of the Move lights up via LEDs inside the controller. The LEDs are capable of putting out any color, which makes it easy to differentiate between players. They can also change colors mid-game, creating another source of user feedback. The color of the orb also changes in response to its environment, ensuring optimal visibility and detection by the PlayStation Eye.
* The internal lithium-ion rechargeable battery lists a minimum capacity of 1320 mAh at 3.7 Volts. The battery gets brownie points for being able to be disconnected from the Move without any soldering. Just unplug the connector and plug the new one in.
* The vibrator motor lifts off, however it still remains connected to the motherboard. It's definitely smaller than the two vibrating motors stuffed into a Sony DualShock 3 Controller.
* The Move motherboard loses points on repairability due to the vibrator motor, LED, charge contacts, and EXT cables being soldered down.
* We were not able to identify the gyroscope manufacturer from a surface examination, but we suspect that it is the white-labeled part #Y5250H.
* As LEDs get warmer, their brightness decreases. Having a heat sink in the LED assembly not only keeps the LEDs at the optimal operating temperature, but also increases the longevity of the diodes. The clear plastic lens on the far left helps diffuse the light from the LEDs to light up the orb uniformly.
