Although Linux-based Tomato and DD-WRT firmwares work with a plethora of routers, Netgear is getting savvy with its marketing by actually aiming its WGR614L at tweakers who just melt upon hearing either term. The so-called open source Wireless-G router features a 240MHz MIPS32 CPU, 4MB of flash memory, 16MB of RAM, an external 2 dBi antenna and a second internal diversity antenna to enhance range. Additionally, the unit will "soon" support OpenWRT, and there's also four 10/100 Ethernet ports in case you're looking for a bit of wired action as well. Potentially best of all, the WGR614L is available as we speak for a very manageable $69.

Buffalo's out tooting its own horn today, as the AirStation Wireless-G MIMO Performance Router claims to be the "first commercial wireless router to come with DD-WRT firmware pre-installed." Aimed squarely at the SMB and SOHO market, the WHR-HP-G54DD (WHR-HP-G54 pictured) is the first device to emerge from the firm's partnership with NewMedia-NET. Of note, this device features five QoS levels to prioritize traffic, optimized link state routing (OLSR), a data transfer application with VPN functionality, PPTP protocol support, WMM and DDNS, and a bevy of management applications including remote network status logging, remote web management via HTTPS and web-based backup / restore. If all this sounds like your cup of tea, you can pick one up now for £41.70 ($86), and you can check out the full (and we mean full) list of specifications right there in the read link.

Sure, turning your OS X or Linux-based machine into a FON Spot is snazzy in and of itself, but what about that dusty grey printer that stays shoved beside your desk? In an admittedly impressive feat of determination, a certain modder took a screwdriver, cutting utensil, and a few dollars worth of FON routers to the inside of a printer's case, and the result is a lesson in utility to say the least. By shoving one of those inexpensive FON routers inside the case, and relying on DD-WRT to open up the appropriate channels, he was able to convert a HP LaserJet 5 into a wireless printer and WiFi hotspot, all without making a scene. Still, the idea of turning your tethered printer into one that accepts incoming jobs wirelessly is no easy task, and judging by the laundry list of duties required to pull this all together, we wouldn't recommend giving this a go without hordes of spare time on your hands. That being said, those still interested should be delighted that a step-by-step guide (with pictures, no less) has been made available for the brave and talented, so be sure to hit the read link and start digesting.