Post Thumbnail

These are primarily for the pros, so we'll keep it short and sheet. RTI is getting set to unveil a trio of new products at CEDIA, the first of which routes eight analog audio and eight composite video sources to eight individual zones. Needless to say, that's the A8 Audio Distribution Matrix Switch...

August 25th 2008 at 2:22pm 0 Comments
Post Thumbnail

It's nearly that time of year again folks -- the hunt for the playoffs begins, school gets back in session and Gefen goes absolutely berserk. It's already gearing up for this year's CEDIA Expo in Denver by revealing details about an 8x4 HDMI Matrix -- which "allows up to eight high-definition video...

August 15th 2008 at 5:30am 0 Comments
Post Thumbnail

We've got to say, Tributaries' T12 power strip was way more intriguing than this thing, but regardless of your excitement level, you may still need a distribution amplifier to send a single HDMI signal out in four different directions. The HDA140 is a 1-in, 4-out amp which pipes one HDMI signal to f...

August 2nd 2008 at 12:09am 0 Comments
Post Thumbnail

Aw, TV One -- always there looking out for our switching / distributing needs. Today, we're being formally introduced to the 1T-DA-500 series of DVI-D distribution amplifiers, which consists of three professional units that "distribute two and four DVI-D signals from a single input." The 1T-DA-552...

July 21st 2008 at 11:28pm 0 Comments
Post Thumbnail

If slinging HDMI signals over Ethernet sounds appealing to you, look no further than Octava's newest box. The HDMI over Ethernet extender enables users to transmit 1080p HDMI signals up to 150-feet over Ethernet (300-feet for 1080i), and while CAT6 is recommended, CAT5 should do the trick in a pinc...

July 13th 2008 at 8:34pm 0 Comments
Post Thumbnail

TVOne is fleshing out its HDMI equipment lineup with the addition of two new HDMI 1.3 switchers and four HDMI 1.3 distribution amplifiers. The new half dozen are being aimed at the "demanding professional market," which means that these pieces will feature front panel status indicators for input si...

June 4th 2008 at 7:46pm 0 Comments
Post Thumbnail

Got a need for a few new pieces of HDMI equipment, do you? Fret not, as MilesTek most definitely has you covered. The outfit has just revealed a new line of long-distance and standard-length commercial-grade HDMI 1.3b cabling, and in case you're after a bit more than just wires, it's also introduci...

May 23rd 2008 at 4:39am 0 Comments
Post Thumbnail

Looking for an HDMI 1.3 distribution amp that won't completely shatter the budget? Enter Octava's 3x4 HDMI Switch + Splitter Distribution Amplifier, which includes support for full 1080p resolutions and enables HDMI switching for three inputs while outputting to (up to) four displays. You'll also f...

April 21st 2008 at 9:44am 0 Comments
Post Thumbnail

Shortly after dishing out a v1.3-compliant 1:10 HDMI distribution amplifier and 1:5 HDMI splitter, Gefen is hitting us up with two new signal pushers for the component lovers in the house. The 1:4 Component/Audio CAT-5 Distribution Amplifier and the 1:8 Component/Audio CAT-5 Distribution Amplifier...

February 24th 2008 at 7:57am 0 Comments