ThreeDimensionalPrinter
Latest
Objet 3D printing put to the test in Iron Man 2 (video)
We got a pretty good look at some of the tech of Iron Man 2 recently, and it looks like the flick's gadgety goodness extends behind the camera as well. It appears that all that bad ass armor is actually produced on the fly by the film's production company, Legacy Effects, using an Objet Eden 3D printer. The company describes the process as "print-to-wear" – pieces come out of the printer, get applied with paint, and make their way to the actors. And since the designs begin with an actual scan of the actor's body, they are much more comfortable. Believe us, there is nothing that a director wants to see less than a cranky Robert Downey, Jr. on their set. For more info on how the device is being used throughout the creative process, check out the video after the break.
Objet announces the Alaris 30 Desktop 3D Printer
It looks like the slow crawl towards a consumer 3D printer continues with Objet's newest outing, the Alaris 30. The relatively compact peripheral uses something called PolyJet Photopolymer Jetting to produce 600 x 600 dpi objects up to 11.5 x 7.7 x 5.9 inches in size (not too shabby when compared to the 5-inch cube of last year's Desktop Factory offering). Equally impressive is the printer's ability to manufacture small moving elements and elements as thin as 0.0011 inches. A generous build tray means that many small parts can be printed simultaneously, and the company promises up to 36 hours unattended printing from your 3D CAD files. Finished models leave the printer fully cured and hardened by UV light. There is no pricing or availability yet, but if you hit the read link below there are plenty more juicy details.[Via TFTS]
Desktop Factory's cheapo 3D printer is coming
Tinkerers, schemers, makers and DIY-buffs: grab your ball-peen hammer and heaviest piggy bank, because you're about to need a loan. A company called Desktop Factory is going to make your 3D-printing dreams a serious reality with the introduction of its 125ci 3D printer, a $4,995 hunk of concept-plastic magic which could possibly represent a paradigmatic shift for the state of three-dimensional printing for the masses. The DF crew calls the pricing "disruptively lower than the nearest competitive offering," and we're inclined to agree, as most 3D printers crest easily over the $10,000 mark. The printer takes up a paltry 25 x 20 x 20-inch space, and weighs about 90-pounds, while the maximum size of printed objects is 5 x 5 x 5-inches, and Desktop Factory says per-cubic-inch printing costs will hover somewhere around $1. One of these beautiful babies could be all yours, just put down your $495 reserve fee, and then go to work on that string of robberies you've been planning.[Via TG Daily]
