Ford deploys robot drivers to test vehicle durability (video)

Sponsored Links

Ford deploys robot drivers to test vehicle durability (video)

Self-driving cars are nothing new: Google, Lexus and Audi have all showcased the technology in prototype form before. But these autonomous vehicles are all designed to operate on public roads and handle unforeseen obstacles using advanced sensors like LIDAR. What about cars operating in a controlled environment like a private track? Ford engineers answered this question when they partnered with Autonomous Solutions Inc. to develop robot drivers to test vehicle durability. The GPS-based system (accurate to one inch) allows up to eight autonomous cars to operate simultaneously on the same track.

Durability testing is traditionally rough on both test vehicles and human drivers. The new technology, which is three years in the making, is now being used to test upcoming models (like Ford's 2014 Transit van). It enables testing 24 hours a day, seven days a week with perfect repeatability. Vehicles send their position and speed to a central computer (monitored by a single person) via a low-latency wireless connection and receive instructions on what maneuvers to perform. This is actually quite similar to what Anki Drive is doing with toy cars. Motors control the steering wheel, gear shifter and pedals to simulate a driver following a predetermined route.

Ford plans to equip the cars with more sensors (such as radar and cameras) to allow a mix of human and robot drivers to operate safely on the same track together. Check out the gallery below and the company's video and PR after the break. %Gallery-191565%

Show full PR text

Ford Using Robots to Improve "Built Ford Tough" Durability Testing of its Trucks

- Ford is first automaker to develop robotic technology that drives vehicles during new accelerated high-impact on-road and off-road durability testing

- Robotically driven vehicles ideally suited for durability test conditions that could prove too taxing for human drivers

- New technology used to ensure Ford trucks, including the all-new Transit van family, are Built Ford Tough

DEARBORN, Mich., June 15, 2013 – Ford engineers have developed the industry's first robotic test driving program – now in use at the company's Michigan Proving Grounds in Romeo, Mich. – to meet demands that Ford trucks undergo ever more strenuous Built Ford Tough testing with greater frequency.

The pilot program has been used most recently for durability testing of Ford's all-new full-size Transit van, which launches in 2014.

"Some of the tests we do on our commercial trucks for North America are so strenuous that we limit the exposure time for human drivers," says Dave Payne, manager, vehicle development operations. "The challenge is completing testing to meet vehicle development time lines while keeping our drivers comfortable.

"Robotic testing allows us to do both," he says. "We accelerate durability testing while simultaneously increasing the productivity of our other programs by redeploying drivers to those areas, such as noise level and vehicle dynamics testing."

The durability technology includes a robotic control module installed in the test vehicle that controls vehicle steering, acceleration and braking. The module is set to follow a preprogrammed course, and the vehicle's position is tracked via cameras in a central control room and GPS accurate to plus/minus one inch. Should the vehicle stray from its programmed course, engineers have the ability to stop the vehicle, course correct as necessary, and restart the test. Onboard sensors can command a full stop if a pedestrian or another vehicle strays into the path.

The robotically driven vehicles are expected to repeatedly perform tests on torturous surfaces with names like Silver Creek, Power Hop Hill and Curb Your Enthusiasm. The tests can compress 10 years of daily driving abuse into courses just a few hundred yards long, with surfaces that include broken concrete, cobblestones, metal grates, rough gravel, mud pits and oversized speed bumps.

All North American Ford trucks must pass this battery of durability tests before they're certified for customer use. Until now, testing speeds and repetitions for specific scenarios were limited due to restrictions placed on human drivers, who were allowed to drive certain rigorous courses only once a day.

The use of robots now accelerates this testing, allowing an unlimited number of repeats until Ford engineers are satisfied with the results. Robots also allow Ford to develop even more challenging durability tests to build tougher trucks.

Ford engineers worked with Utah-based Autonomous Solutions Inc. to design and manufacture the software and components that enable autonomous, robotic operation of the test vehicle.

"We're very excited to work with Ford for autonomous vehicle testing," said Mel Torrie, CEO of Autonomous Solutions Inc. "The reliability, durability and performance enhancements we've developed with Ford will not only help them reach their safety and accuracy goals, but will also improve vehicle automation in other areas such as mining, agriculture and the U.S. military."

Ford engineers designed and deployed the robotic technology with two goals in mind: protecting human drivers and engineering Ford trucks to be tougher than ever.

"The goal here was not to develop a truly autonomous vehicle that can drive itself on city streets," said Payne. "Our objective was to create a test track solution that allows for this type of intense testing that could take our vehicles to the most extreme limits of their engineering while ensuring the safety of all involved."

All products recommended by Engadget are selected by our editorial team, independent of our parent company. Some of our stories include affiliate links. If you buy something through one of these links, we may earn an affiliate commission.
Popular on Engadget