qi-hardware
Latest
Qi-Hardware debuts free, open source wireless solution, not a threat to WiFi
Qi-Hardware has a bit of an obsession with free, open source, and underpowered. The latest project from this descendent of OpenMoko is a set of license free wireless boards called atben (for the company's Ben NanoNote) and atusb for other laptops. The adapters rely on the IEEE 802.15.4 standard which powers 6LoWPAN and ZigBee. Don't get confused though, this is not a replacement for WiFi -- it's more like long range Bluetooth (and it's not compatible with either). Ben WPAN, as it's being called, has a range of about ten meters in "standard" mode while pushing 250Kbps. Turning on the "non-standard" mode boosts throughput to (a still patience-testing) 2Mbps, but cuts the range in half. You can pick up pre-built adapters starting at €29.50 (about $42) for the atben, €41.30 ($59) for the atusb, or €59.00 ($84) for both at Tuxbrain. Don't expect to just jam one into your Mac however -- for now at least, Ben WPAN is a Linux only affair. (How often do you hear that?)
Qi Hardware's tiny, hackable Ben NanoNote now shipping
It's been something of a long road to this point (beginning with the company being founded by some laid off OpenMoko employees), but Qi Hardware's ultra-compact, open source Ben NanoNote (actually, 本 NanoNote) is now shipping for just $99. That will get you a bare bones device that can simply be used as a Linux-based "handheld laptop" out of the box or, as the company hopes, be turned into anything from a PMP to an offline Wikipedia device. Something along those lines would seem to be the most practical, considering the device only has a 3-inch 320 x 240 display, along with some similarly basic specs including a 336 MHz XBurst Jz4720 CPU, 32MB of RAM, 2GB of flash storage, and a microSD card slot for expansion. Head on past the break for a look under the lid.
