WilsonElectronics

Latest

  • Wilson Electronics' new 4G signal booster doesn't care about carriers

    by 
    Jamie Rigg
    Jamie Rigg
    01.06.2014

    Wilson Electronics is only interested in one thing: boosting cellular signals for those starved of bars. The company's also quite fond of Vegas, and for the third year running, it has made the trip to CES with fresh hardware in tow. Previously, Wilson's boosters have been able to enhance the signal from a couple of carriers at the most, but the new DT4G doesn't care what device you're using, nor which network bills you at the end of the month -- all it cares about is making sure you've got all the 4G, 3G or 2G airwaves you need. It's touted as the very first carrier-agnostic booster, and will be ready to cling to walls "soon" for around $400.

  • CES 2013: Wilson Electronics introduces the Sleek 4G booster to get your iPhone more signal

    by 
    Mike Schramm
    Mike Schramm
    01.11.2013

    Wilson Electronics has been making cell phone signal boosters for a while now, both for home use and for larger scale settings like offices and commercial use. But the company is turning to something more personal with its new Sleek 4G cell phone booster, which is a phone stand that will make your iPhone's signal (or a signal from any phone, really) up to 10 times more powerful. The booster, which is shipping next week, basically consists of a phone stand that you can either place on your desk or stick on your car's dashboard, and then a cord leading off of it that connects to an antenna with a magnetic base. That's it -- you don't need to actually connect your phone up at all, because the stand will just grab the signal automatically. The stand itself has a few different prongs on the sides that you can adjust depending on what phone you're using, but other than that, it just boosts a signal, and well. A normal phone signal, according to Wilson, runs at about 200 mW, but with the Sleek 4G adding a boost, the signal can reach up to 2,000 mW. Wilson's reps told us that most people think of using cell phone boosters out in more rural areas, but given all of the holes and issues in more populated areas, it can be helpful in bigger cities, too. And the booster has one other big benefit: It'll increase the battery life on the phone. By making sure the signal is always strong, Wilson says that many users have seen phones last longer than before. At $199, this isn't a small investment for sure. But if you constantly have problems with your iPhone's signal and could use a way to keep it going whether you're in a home or office or out and about in your car, Wilson's Sleek 4G booster could help.

  • Wilson Electronics announces Sleek 4G signal booster with multi-carrier support (update: hands-on!)

    by 
    Brad Molen
    Brad Molen
    01.06.2013

    If you've ever found yourself on a lone road in the middle of nowhere with zero bars of reception on your phone, it's quite likely that you've entertained the idea of grabbing a signal booster. Wilson Electronics, one of the best known manufacturers of such devices, is introducing its latest Sleek 4G booster at CES. What makes this version different from the models launched just a few months ago? Instead of needing separate boosters for AT&T, Verizon and T-Mobile, it's now capable of supporting phones, tablets and hotspots on all three, as well as legacy signals for all other US carriers. Head to the press release for more details. Update: We actually had a chance to catch up with Wilson Electronics here at CES Unveiled 2013 and spend some brief time with the Sleek 4G signal booster. For a piece of kit that can take virtually any US wireless frequency (with Nextel and WiMAX as the only exceptions) and amplify it, the Sleek 4G signal booster is a quite unassuming black, plastic accessory. The add-on, which is set to retail for $199, works by plugging into any smartphone via USB -- yes, your phone will have to be on to power it -- and features a switch alongside that port to toggle between AT&T and Verizon's LTE. Considering the ever-growing sizes of smartphones these days, Wilson's seen fit to include three sets of extenders in the box to accommodate whatever handset you happen to sporting. It begins shipping next week, so if you typically have issues with cell reception, this could very well be one (pricey) solution. Follow all the latest CES 2013 news at our event hub. Joseph Volpe and Sarah Silbert contributed to this report.

  • Wilson Electronics releases three 4G multi-band signal boosters, no soup for Sprint

    by 
    Nicole Lee
    Nicole Lee
    10.10.2012

    Even if you live in an area with 4G coverage, you might not get the best service inside certain buildings, and that's where companies like Wilson Electronics come in -- just take a peek at its Sleek 4G-V, for example. At MobileCon 2012, the antenna maker added three more to its lineup. They are the Tri-band 4G-V, the Tri-band 4G-A, and the Tri-band 4G-C, and are meant for Verizon's 4G LTE, AT&T's 4G LTE, and T-Mobile's "faux-G" network -- the latter of which is also recommended for use throughout Canada. The antennas are designed to boost the signal of older legacy networks too, so no worries if you don't live in an area blessed with 4G. No pricing and availability just yet, and we don't see any sign of a Sprint antenna either. To get more details, catch the full PR after the break.

  • Wilson Electronics' Sleek 4G-V Verizon flavored signal booster reports for service

    by 
    James Trew
    James Trew
    07.11.2012

    If you're often finding that your super-duper 4G service is more LT-Eh?, than LTE, then you might have been curious about Wilson Electronics' Sleek 4G-V cellphone signal booster. If you were, it's time to stop waving your hand in the air looking for bars, and stick it in your pocket in search of some sheets, as it's now available in stores. Of course, it's Verizon customers who'll benefit the most, with the Sleek 4G-V being designed with the big red's 700MHz service in mind. That said good old 2- and 3G services are still given a leg up. The MSRP remains $129 for the standard "in-vehicle" model, with an optional accessory kit for indoor use (no price at this time). If this message kept dropping out, head over to the window past the break for the PR.

  • Wilson Electronics introduces the world's first LTE signal booster ahead of CES

    by 
    Brad Molen
    Brad Molen
    01.03.2012

    Love Verizon's LTE but just can't seem to get bars of service in your office or home? Wilson Electronics has announced the Sleek4G-V, which the company claims is the world's first 4G mobile signal booster. We haven't found any contenders to the claim, but either way the signal enhancer is bound and determined to beef up your high-speed data. In addition to providing Verizon-specific LTE, Wilson promises 2G / 3G connectivity for all major US carriers (iDEN capabilities excluded) just in case you need to actually, y'know, make calls on your phone. While it's designed primarily for outdoor use, an optional accessory kit can be purchased to make it work indoors quite soundly. Listed for $150, the Sleek4G-V should make its way to retailers by the second quarter of this year. Check out the press release for all the details.

  • Wilson Electronics debuts the AWS 70 signal booster to bring life to your office's T-Mobile dead zone

    by 
    Brad Molen
    Brad Molen
    10.10.2011

    See that beauty up above? That, dear friends, is the Wilson Electronics AWS 70 signal booster. We know, it doesn't look like the standard-issue 50-cent sticker that you slap underneath your battery, right? This beefy guy is meant to be a thousand times more effective, aiming to amplify your office's poor AWS signal -- most notably T-Mobile, but any 1700 / 2100 AWS connection can benefit -- by a total gain of 70dB. The booster offers the ability to manually adjust the amount of gain for uplink and downlink separately, so you can optimize it however you deem fit. With a MSRP of $360, it's not for the weak-walleted -- you'll likely want to put it on the company tab. If you're interested in how this all goes down, check out the presser below.

  • Wilson Electronics Sleek signal booster reviewed: surprise, it works!

    by 
    Darren Murph
    Darren Murph
    01.22.2010

    Signal booster. There, we said it. Quick -- what immediately comes to mind? We're guessing you're suddenly disgusted by the fact that you paid $19.99 (plus a nominal shipping and processing fee) for one of those worthless stickers back when your Snake-laden Nokia candybar had the worst reception of all time, but Wilson Electronics' Sleek is a horse of a different color. Our good pals over at Gadling were able to test out the Sleek after catching it at CES, and amazingly enough, they found that it worked exactly as advertised. It's engineered to be mounted in a car so that your phone can rest in the cradle while you use some sort of headset to communicate, but an AC adapter is available for those who need a boost indoors. The only real downside (besides the steep $129 asking price) is that you can't very well have your mobile in the cradle and the cradle upside your head. Unless, of course, you're still looking to relive the days when Sidetalkin' was all the rage. Man, where's the N-Gage when we need it?