Gather your supplies. At the end of the gallery, you will find a pattern that you can print.
Cut your pattern along the black lines. Leave the white area on the right eye uncut.
Place the pattern over the felt and cut out the pieces.
To cut out the center of the right eye, it's easiest to fold the eye over and cut a tiny slit in the center. Then you can cut out an almond shape.
You'll notice the pattern does not include the gray staples. This part is really simple. Just cut length-wise down your gray felt. The felt is just a tiny bit longer than the bag, so you will need little trimming.
Cut out a thick gray bar, about 2x the size of your previous piece of felt. Cut little bars, about half an inch wide, from this piece.
Place the pieces on the tote bag to get a good idea of where you will need to glue them.
Place a piece of wax paper inside the bag. This will keep any glue that may leak through from getting on the other side of the bag.
Begin to glue the pieces that go on top of each other together.
When your parts are done, glue them down to the bag.
If you have any excess, trim it off.
Let the glue dry and you're done! Check out more cool crafts at <a href="http://www.wowinsider.com/category/world-of-warcrafts/">World of WarCrafts</a>.
A picture of the bag in use.
Right click on the pattern and save. Be sure to set your printer to landscape when printing.