Cut out the rectangular pieces first. A paper cutter is helpful but not necessary. If you do use one make sure you don't go too far and cut off the letters.
Cut out the remaining pieces with some scissors.
There will be a few areas that you will need to cut out with an Xacto knife.
Put some double sided tape or glue dots on the backs of the pieces. Gently place the pieces onto the rectangular print of the instance. Be sure to line up the edges.
Your completed pop up art pieces should look like this.
When you frame your picture, it's nice to use a matboard. I used 8x10 frames and pre-cut matboards I found for that size at Hobby Lobby.
Hang them up on your wall!
Right click and Save As.
Right Click and Save as.
Right click and Save as.