component
Latest
How to relocate a HD set-top-box and still have it work with an HDTV
We know how it goes, you pick up a nice big HDTV and a wall-mount only to get it all setup then realize you still need a place to put your HD set-top-box. Or maybe you have a nice piece of furniture nearby to hide the box in, but since it is out of sight you need to get the IR remote working. Or you could even be like us and refuse to have any equipment with a loud fan in your home theater -- yes we're talking about you Mr. Xbox 360. Luckily there is a workable solution and with a little money and some elbow grease, you can hide that box in a place that will be out of sight and out of mind.
Castrade's Game Box lets your game consoles talk VGA, sweet nothings to your computer monitor
If you have HDMI out on your game consoles and HDMI in on your computer monitor you can pretty much stop reading. If, however, you're still stuck in the analog realm, check out Castrade's upcoming CG-USC01HD-PLUS Game Box. It sports composite, S-video, and component inputs, porting everything over to VGA at resolutions ranging from 800 × 600 at 75Hz all the way up to 1920 x 1200 at 60Hz. But, with maximum input resolutions of 1080i or 720p, true 1080p to your display is right out. DVI output would also have been nice, but there are adapters for that, and since the box sports a VGA pass-through you can use that same monitor for PC gaming, too -- you know, in case you start to miss patches and pesky DRM and such. The Box ships in Japan on May 27 for ¥10,000, which equates to about $100 here. Just like that white PS3 in the background, though, there's no word of an official US release.[Via AV Watch]
Digital foundry's HDScope is the capture device for gamers who serve gamers videos about gaming
If you wanted to launch a videogame site in the old days all you needed was high school grammar and a bunch of grainy, 300 x 200 screencaps of Mario 64. Today's readers are a more fickle bunch, wanting monitor-busting screenshots and CPU-taxing HD videos of the latest Xbox 360 and PS3 titles. To cater to the sites who will cater to those gamers, Digital Foundry is launching the HDScope, a pixel-crunching, semi-portable PC designed explicitly for recording content in 480i, 576i, 480p, 720p, or 1080i via component or HDMI inputs. It sports a 7-inch touchscreen, meaning you can just plug this into the wall and start gathering footage from that exclusive (and oddly dusty) beta copy of Duke Nukem: Forever you scored. No word on price or availability, but launch a site full of random videos captured on one of these and you'll surely be swimming in ad revenue -- and outrageous hosting fees.[Thanks, Dirk]
Don't panic: NXE will stream Netflix HD via component cables
For those of us with HD displays, the revelation that the Netflix component of Xbox 360's New Xbox Experience would stream HD video via the intertubes was just spiffy. Then came various reports that said feature would only be available in situations where the 360 was connected to an HDCP-compliant display via HDMI. Even then, the scuttlebutt was that older 360s might not be up to snuff. Not true, as our pals at Engadget have found.They've tested a 360 connected via component cables and confirmed that it displays the Netflix HD content just fine, as you can see in the above photo. It should be noted that those with older HD sets, which only have DVI inputs, may encounter problems using HDMI-to-DVI converters, since the 360 can't make the necessary HDCP "handshake" in that configuration. As Engadget points out, it's still possible to use the 360's optional VGA output in this case. For most HD display owners, though, insert a big sigh of relief here.
Ask Engadget HD: Which cable / interconnect brand should I rely on?
We've heard this question so many times that we've taken for granted the answer, but given the recent increase in competition in the cable market, we figured we'd pass along Josiah's question on the matter: "I'm not going to pay hundreds of dollars for those cables sold in Best Buy and Circuit City, but I want the best possible audio and video quality. I've got a pretty basic setup, and I just need a few HDMI cables, a set of component cables and a few optical audio cables. Where would I go to get the best for my money? Is there a particular brand I should look for? What has worked out for your readers?" Unload your experiences with cables -- however expensive (or cheap) -- below, and be sure to elaborate on which brand / store / etc. you found to be the best for the price. Oh, and make no mention of Furutech, we're trying to keep the cost-per-cable under a grand.Got a burning question that you'd love to toss out for Engadget HD (or its readers) to take a look at? Tired of Google's blank stares when you ask for real-world experiences? Hit us up at ask at engadgethd dawt com and keep an eye on this space -- your inquiry could be next.
Poll: Do you still use component?
We live in an ever changing world of electronics -- which is the way we like it -- but sometimes we try to hold on to the past. It's not that we don't like progress or change, but it's just that we feel that for us to throw out all of our old stuff and replace it with new stuff, that the new stuff had better be an improvement. Recently we started playing with Vudu again, and one thing we realized we missed in our review was the fact that HDMI is required for HD viewing. We find this new trend to kill component video a real drag, but wonder is it time to let go? We know that custom integrators don't like HDMI, but other than that, are we the only ones holding on to the ability to use existing custom cables that don't fall out on their own?%Poll-18209%
HDfury2 adapter kit tunnels HDCP-laden HDMI content via component / VGA
Now here's an adapter we can all love: the HDfury2. Put simply, this kit enables owners of pre-2005 displays to enjoy 1080p content via HDMI. Those "older" sets and projectors lacked the ability to comprehend HDCP, and this minuscule device packs a built-in deciphering converter that pumps out Blu-ray content at beautiful 1080p over component / VGA. There's also an audio combo jack that channels analog and digital optical formats, and yes, it plays nice with both PAL and NTSC. Check the read link for all the fine print, and get ready to hand over $249 when it (hopefully) ships next month.[Thanks, Daniel]
Extron's RGB-HDMI 300 converts component / RGBHV to HDMI
What is this, the unofficial week for dishing out HDMI equipment? Shortly after seeing an HDMI repeater and distribution amplifier from two separate companies comes Extron Electronics to tempt your wallet once more. The RGB-HDMI 300 conveniently converts incoming analog component video and RGBHV signals to HDMI, and while it won't accept Discover, it will play nice with HDTV resolutions up to 1,920 x 1,200. You can also select from a number of HDMI output rates including 1080p60, and the slim profile makes it easy to hide on the backside of a flat-panel. No mention of a price, but we're guessing it'll be somewhere between "costly" and "for real?".
TV One intros analog / digital video format converters
We have all ideas that these converters from TV One will likely be used by professionals exclusively, but if you've found yourself in a pickle that requires a digital-to-analog (or vice-versa) converter, here's your solution. The 1T-FC-524 converts analog RGBHV or Component YPbPr inputs to DVI signals, while the 1T-FC-425 converts DVI to RGBHV or Component YPbPr. Additionally, the output resolution is the same as the input, and TV resolutions from 480i up to 1080p are supported (along with PC resolutions up to 1,600 x 1,200). Both units are selling now for £119 ($235) apiece.
XCM offers up Mega-Cool component-to-VGA converter
Not like Team Xtender hasn't been offering something similar to this for well over a year now, but hey, nothing wrong with a bit of delayed competition. XCM has just made clear that it will soon be selling the 1080p Mega-Cool VGA box, which takes any component input and shoots it back out via VGA. The box supports PC resolutions up to UXGA (1,600 x 1,200 at 75Hz) or HDTV (up to 1,920 x 1,080). Plug-and-play, NTSC / PAL support and USB power are all included -- you just provide the ins and outs. Mum's the current word on pricing / availability, but we're hearing that e-tailer Total Console will be offering it soon.[Via IGN]
TVOne intros 1T-MX-3344 component Matrix Routing Switcher
Hot on the heels of its 1T-DA-631 HDMI Extender comes the rack-mountable 1T-MX-3344 component Matrix Routing Switcher from TVOne. Granted, component uses are slowly fading, but for those still relying on the ole green / red / blue, this here device provides four inputs and four outputs with stereo audio jacks accompanying them all. As you'd expect, it enables any of the four inputs to be "routed to a single output, multiple outputs or all outputs," and resolutions from 480i to 1080p are supported. Users can control the action via the front panel buttons, an IR remote or the RS-232 interface, but it'll cost you a stiff $595 for the privilege.
Gefen unloads two new component video distribution amplifiers
Shortly after dishing out a v1.3-compliant 1:10 HDMI distribution amplifier and 1:5 HDMI splitter, Gefen is hitting us up with two new signal pushers for the component lovers in the house. The 1:4 Component/Audio CAT-5 Distribution Amplifier and the 1:8 Component/Audio CAT-5 Distribution Amplifier each enable component video to be delivered to a multitude of displays (four for the first, eight for the second); additionally, each box is equipped with RCA, S/PDIF and Toslink optical audio jacks. The duo promises to carry both audio and 1080p video signals over CAT5 cables to displays some 1,000 feet away, and while they'll run you $799 and $1,499, respectively, receivers are sold separately at $200 a pop.
Gametrailers.com listens, compares component and HDMI
As many of you know, Gametrailers recently came under quite a bit of scrutiny when it was learned that the PS3 and Xbox 360 comparison videos they've been posting were used at the PS3's default video settings and using component cables. To silence its critics, Gametrailers posted a video comparing Uncharted: Drake's Fortune using standard component cables like they have in the past and what many PS3 owners have wanted – HDMI, full RGB and with adjusted ultra white levels. After watching the video several times, we have to say, it's kinda hard to tell a difference. In the end, this whole controversy might have been a bit overblown, but we think it'd probably be smart on Gametrailer's part to just use the HDMI settings in any future comparison videos. It just might save you guys a lot of hate mail.
Hauppauge intros USB PVR with component input
Hauppauge has pulled the wraps of their HD PVR, which can take a HD signal from its component inputs and transcode it to H.264 in real time for storage on your computer. If you don't believe that old-school analog component connections are any good, keep walking. True, there will be some degradation after the signal makes its digital-to-analog-to-digital journey, but we like the universal applicability of this device. Hauppauge is tossing a copy of its HD encoder software so you can then burn the recorded content to a DVD for use on the run. Available Q1 2008 for $249.[Via TVSquad]
Sony unveils slew of high-end AV cables in Europe
Those who just seem to sleep better knowing that every component of their (Sony) setup has the same brand name on it may take pleasure in the fact that the aforementioned company is doling out a smorgasbord of new AV cables across the pond. Apparently, the firm's high performance AV series will include HDMI, component, SCART, optical / coaxial digital audio and stereo audio flavors, and they will all be marketed as perfect complements to BRAVIA TVs, VAIO PCs, PS3s and Sony Blu-ray players. These cables are purportedly a notch above the midrange lineup introduced earlier this year, and they all boast 24k gold plated connectors and are manufactured from 99.996-percent oxygen free copper (OFC). No prices are mentioned, but you can supposedly find the whole lot now in one, three and five meter lengths over in Europe.[Via Cybertheater]
Confirmed: Apple component cable works with iPhone
So first, the iPhone appeared on the Apple Component cable page, and then we heard it didn't run video out, and then it did again, or maybe it didn't. At any rate, we finally have confirmation for you, thanks to punkassjim, that the iPhone will do video out.In fact, he tells us that it will even show a preview of what you're watching on the iPhone itself while the video plays, along with the standard video controls and information. Very slick. I assume the display is the exact same resolution as whatever your video is-- on some TVs that will matter, on some it probably won't. And I'm pretty sure, even though he didn't say, that this is an unhacked iPhone on 1.1.1-- the update to do TV out came with that.Finally, Jim says he was disappointed to find that the cables didn't, however, work with his iPhone's dock-- when he plugged them in, he wasn't asked to display to TV as in the pic above. Good news, though-- he also notes that the issue is being fixed with the new Universal Dock, as Apple specifically says they'll work. If you keep lots of video media on the iPhone and have wanted to get it on the small screen, you're in luck.Thanks, punkassjim!
HDMI vs. component
In the mad rush for the latest and greatest, it's easy to categorize older technologies as inferior just because they're older. We've covered the topic of HDMI vs. component before, and there's definitely a lot of FUD behind the widespread belief that the newer HDMI standard is always "better." The bottom line is this, the gear on either side of the cable often has a far larger effect on final image quality than the cable itself. With well designed equipment, that old-school component connection may perform just as well as the HDMI one. Factor in HDMI's shorter reach, higher priced switching equipment, and mechanical stability issues, and you may end up with an inferior overall solution. Trust your own eyes and ears more than any marketing speak, as some of the push behind HDMI has nothing to do with image quality.
A closer look at PSP's AV cables
Here are the cables that you'll need to get your PSP connected to your TV. Official pricing hasn't been announced quite yet, but we can still stare in awe at the packaging, marveling at when we'll be able to connect our PSP systems to the TV.See past the break to see more images of the PSP cables.
CEA turns down 1080p over component proposal
Wow, that was really quick. The CEA just turned down the proposal of adding 1080p to the component video spec. Apparently, television and movie industry suits were totally against the idea - big surprise. We're sorry if we got anyone's hopes but it doesn't look like there is going to officially be 1080p over component anytime soon. It sounds like there is a plan B however, but something tells us not to hold our breaths.
Yamaha announces feature-packed RX-Z11 home theater receiver
Normally home theater receivers aren't considered anything special, content to switch inputs and power speakers, letting the plasma flat-panel take all the glory. But Yamaha has thrown all the goodies and features into the RX-Z11 receiver, with THX Ultra2 Plus certification for quality assurance, five HDMI 1.3a inputs and two outputs, four component inputs and two outs, and support for five audio and two video zones. It also supports the newest audio codecs, including Dolby TrueHD, and DTS Master Audio. To finish off the features, the receiver also supports terrestrial HD and XM satellite radio, network capabilities and internet radio, and includes an iPod dock for external media. The RX-Z11 comes out in November, for an undisclosed (but surely expensive) price.
