SandForce
Latest
Corsair adds 90GB SSDs to Force 3 / GT lines
Been thinking Corsair's Force SSD lineup was too small at 60GB, but too darn capacious at 120GB? Well Goldilocks, we've got good news, as the company's unveiled two middling models that might be just right. We begin with the 90GB Force 3, which wields 550MB/s reads and 500MB/s writes at a $159 price point. For an additional $40, you can bump speeds up by 5MB/s on both counts with the identically sized Force GT. Just like their smaller and larger brethren, the two additions tote SandForce SF-228x controllers as they haul bits over SATA 6Gbps. They're supposedly available "immediately," but, like AnandTech, we couldn't find either in stock. If middle of the road is your thing, then Godspeed, but we'll stick with the big one.
SandForce demos 24nm flash from Toshiba, cheaper SSDs on the horizon
SandForce, the company behind the companies that make some of the best SSDs on the market, is at it again -- this time demoing 24nm NAND flash from Toshiba at the Flash Memory Summit in Santa Clara, CA. An SF-2000 processor was matched with the new shrunk-down storage, a 6Gb/sec SATA connection, and jammed inside a 2.5-inch enclosure to deliver 500MB/sec read and write speeds. It's not the fastest we've seen, but the big news here isn't the data rates -- it's the potential for cheaper SSDs. The smaller manufacturing process means Toshiba will be able to squeeze more storage out of the same wafer of silicon and, hopefully, shrink those still somewhat bloated prices. Check out the full PR after the break.
Kingston HyperX SSDs now shipping, SandForce-equipped for Hyperspeed
Brace yourselves speed freaks -- Kingston Digital is now shipping its latest 2.5-inch HyperX SSD drives, equipped with 6Gb/sec SATA Rev 3.0 and everyone's favorite SandForce SF-2281 controller. You want fast? You'll get fast, alright. This SSD's read / write speeds top out at 555MB/sec and 510MB/sec, which is surely enough to keep your rig zipping through those intense gaming marathons office workloads. You'll be able to pick up the drive itself with 120GB of storage for $270 or 240GB for $520, while the install kit -- which includes such goodies as a SATA cable, desktop mount, torque screws and more -- tacks on an extra $15 and $20, respectively. That pricing is only for a limited time though, so be sure to check the PR and hyper-edited video past the break for all the details.
RunCore outs T50 6Gb/s mSATA SSD, SandForce speeds included
It's finally here: a 6Gb/s mSATA SSD, rocking those highly coveted SandForce speeds. RunCore's new T50 series offers maximum sequential reads of 550 MB/s and writes of 470 MB/s, with the help of SandForce's SF-2281 controller (formerly relegated to the big boys). The little guy's being marketed for high-end portables and offers 60GB for $198 or 120GB for $358. The outfit's also touting the new I50 line, serving up more modest 280 MB/s reads and 270 MB/s writes based on SATA 3Gb/s. The I50's targeted at tablets and laptops, and ranges from $178 for 60GB to $308 for 120GB. We'll hold our final judgement for when we see these things hit the market in late July -- until then, you can peep the full PR after the break.
OWC Mercury Electra 6G SSDs boast big speeds, price to match
Other World Computing may specialize in upgrading aging Macs, but you don't have to own one to jam one of its new Mercury Electra 6G SSDs in your computer. The high-end SandForce Driven line of NAND drives range in size from 120GB to a far more impressive 480GB and, with the aide of 6Gb/sec SATA 3.0, can sustain write speeds of 523MB/sec and read speeds of 556MB/sec. Of course, this sort performance doesn't come cheap -- the smallest of the trio will set you back $230, while the massive 480GB model weighs in at a wallet-sapping $930. You can pick them up now from OWC if you've got a serious need for speed, and plenty of disposable income. Check out the PR after the break.
Corsair Force Series 3 SSDs: SandForce speed for modest money
Solid-state storage aficionados are well-versed in the virtues of SandForce controllers, and Corsair's new Force Series 3 drives pack a fresh version of the technology. Like the firm's Force GT, Series 3 delivers data using SATA III 6Gbps connections, but uses a newfangled SandForce SF-2281 controller to shoot your info to and fro at up to 550 MBps read and 520 MBps write speeds. The SSDs also perform 85,000 IOPS, which makes the 60,000 IOPS from similarly-priced offerings from OCZ look downright dilatory in comparison. Prices are $139 for 60GB, $219 for 120GB, and $499 for the 240GB version, so they still aren't cheap, but it's a small price to pay to dodge the dangers of disk-based storage.
OCZ unveils Agility 3 and Solid 3 SSDs for thrifty speedsters
Now that OCZ has shifted its corporate focus away from the DRAM market, the company has begun deepening its lineup of solid state drives with two new additions: the Agility 3 and Solid 3. The pair of 2.5-inch SSDs, announced today, run on the SATA III 6Gbps interface (unlike their SATA II predecessors) and come strapped with a SandForce SF-2200 processor that allows for some pretty speedy performance. The Agility 3 boasts a maximum read rate of 525MBps, a write speed of 500MBps and can crank it up to 60,000 IOPS. The Solid 3 ain't no slouch, either, with a 500MBps read rate, 450MBps writing capabilities and a max IOPS of 20,000. Granted, they won't deliver quite the same punch as the Vertex 3 Pro, but they also won't cost you quite as much. On the high end of the price spectrum is the 240GB Agility 3, at $480, with the 60GB and 120GB versions priced at $135 and $240, respectively. The Solid 3, meanwhile, is available in both 60GB ($130) and 120GB ($230). Not exactly chump change, but still cheaper than OCZ's heavier hitters. Hit the source links for more details.
Behold Corsair's Force GT SSD -- flaming red shell and 500 MB/s read and write speeds
Feast your eyes upon the latest and greatest SSD from Corsair, the Force GT. Aside from its flaming red façade, the Force GT also promises snappy 520 MB/sec read and 500 MB/sec write speeds thanks to its SandForce SF-2000 controller -- nearly twice as fast as the company's previous SandForce drives. The 240GB SSD will officially be unveiled at CeBIT 2011 (which ends tomorrow), but we thought you'd like to see this ruby-red speed demon a little early. Enjoy. [Thanks, Bjorn]
OCZ's consumer-grade Vertex 3 SSD gets benched, SandForce SF-2281 helps it spank competition
We thought OCZ's Vertex 3 Pro was some flaming hot stuff, but solid state storage reviewers have mind-boggling news -- the plain ol' Vertex 3 will bring the same completely ludicrous 550MB / sec read speeds (plus even faster 525MB / sec writes) at a down-to-earth price. Previews found the Vertex 3's new SandForce SF-2281 controller and Micron 25nm flash memory chips edged out even its own enterprise-grade cousin in nearly every test -- with a few anomalies here and there -- and were reportedly too fast to achieve full performance with any SATA 6Gbps controller save the one in Intel's new Cougar Point chipset. Best of all, they claim that OCZ's targeting a price of just $250 for the 120GB version, or $500 for the 240GB drive benched here. That's still a chunk of change, but considering current-gen 120GB SSDs still cost over $200 street, it sounds like OCZ and SandForce are setting a bar that will drive down prices across the board. We can't wait. Read - AnandTech Read - Hot Hardware Read - Legit Reviews Read - PC Perspective Read - Storage Review
OCZ Vertex 3 Pro hits the test bench, sets the new single-drive speed benchmark at 550MBps
We're becoming somewhat repetitive in our writing about SSDs -- every next one is that extra little bit faster or better and the crown just keeps exchanging hands -- but we couldn't be happier for it. Solid state storage is still one of the most exciting and rapidly developing areas of modern technology, a fact evidenced perfectly by the recent introduction of OCZ's Vertex 3 Pro drive. It touts a mad 550MBps maximum read and 500MBps maximum write speeds, mostly thanks to the brand spanking new SandForce SF-2500 controller chip it has onboard. It's been put through the benchmarking wringer by a number of sites today and the resulting conclusion has been lucid and unequivocal: the Vertex 3 Pro is the new champion among standalone 2.5-inch SSDs. AnandTech goes so far as to say it's "the first drive that really needs a 6Gbps interface." The V3Pro isn't yet on sale and the hardware looked at it in these previews was not final, but the next generation of SSDs looks to be keeping the breakneck pace of development that's characterized the storage medium so far. Lovely!
OWC aims SandForce-based Mercury Aura Pro SSD at 2008 / 2009 MacBook Air
Own a first generation MacBook Air? If you're perfectly fine with hanging onto it for awhile, Other World Computing is now offering a tempting upgrade in the storage department. The newly announced Mercury Aura Pro is promised to deliver up to 275MB/sec, which equates to right around 3x faster than the factory SSD on 2008 - 2009 MacBook Air models. It's said to be the first SandForce-based SSD available for those machines, with 60GB, 120GB, 240GB and 480GB models available. The foursome is available today for $199.99, $299.99, $579.99 and $TBA. Curious, but true.
OCZ intros Vertex 3 Pro, Vertex 3 EX and Z-Drive R3 PCIe SSD at CES
Hello, speedsters! OCZ Technology has just busted out a new trio of solid state solutions here at CES, so we won't waste any time getting down to business. Up first is the performance-oriented, MLC-based Vertex 3 Pro, which runs along quite hastily on the SATA 6Gbps interface. We're told that it's built with a next-generation SandForce controller, enabling it to approach 80,000 IOPS and demonstrate 550MB/sec transfer rates. Up next is the Vertex 3 EX, which also utilizes a SATA 6Gbps interface but relies on SLC Flash memory. It's also capable of pushing a similar read rate (and the write rate of 525MB/sec ain't too shabby, either), with both the EX and Pro to be offered in capacities of 50GB, 100GB, 200GB and 400GB. Finally, the third-generation Z-Drive is being officially revealed, with the Z-Drive "R3" PCI Express SSD being the company's first SandForce-drive PCIe SSD. It's engineered for Tier-0/1 data applications, and offers performance rates of 1GB/sec and 135,000 IOPS. Those with absurdly deep pockets can buy one with up to 1.2TB of onboard storage, but alas, OCZ's not serving up MSRPs on any of these guys. The full release is after the break, complete with details on its new ZX Series of power supplies. %Gallery-112480%
RunCore's 1TB SATA III SSD is 3.5-inches and 1TB big, 500MB/s fast
Your average SSD fits in a laptop friendly 2.5-inch slot and does so meekly, not calling too much attention to itself. RunCore's next SSD powerhouse, however, is a little more bodacious. It takes up a desktop standard 3.5-inch slot and is said to rely on "substantial" sized PCBs on both sides of its cool, cerulean silicon. It's an SATA III drive offering a similarly substantial 1TB of storage, even fronting dual SandForce SF-1222 controllers for integrated RAID 0 performance. The result? 500MB/s speed, meaning this hippo does that tutu right. No pricing has been announced yet, but expect an appropriately large MSRP when it is fully announced at CeBIT in March.
Corsair Force series gets 90GB and 180GB brothers, middle child syndrome inevitable
Corsair has added new 90GB and 180GB sizes to its blazin' fast Force Series of SSDs, growing the happy family which already included 60, 120, and 240GB versions in addition to the original 100GB and 200GB options released back in the spring. Unlike its previous siblings, both the F90 and F180 are also available immediately from Corsair dealers for suggested MSRPs of $255 and $430, respectively. Built around the lauded SandForce SF-1200 controller and capable of beastly 285MB/sec read speeds and 275MB/sec write rates, these latest releases are not too small and not too big, making them the perfect Goldie Locks drives of the SSD world. To hear the news straight from Corsair's mouth, check out the press release after the break.
Zalman's SandForce-based N Series SSD drive gets reviewed, patted on the back
Zalman's making an SSD? You betcha, and it's embedding a SandForce SF-1222 controller in its N Series line. That controller has proven to be the go-to one for loads of solid state drives, but Zalman's joining the party a touch late. Unfortunately for it, the MSRPs affixed to the 64GB ($169) and 128GB ($289) versions aren't exactly class-leading, but the benchmarking gurus over at Legit Reviews took it upon themselves to test a 128GB model anyway. After running the gauntlet, the conclusions drawn were fairly predictable: scores were right in line with every other SandForce drive they had tested in recent months, with words like "speedy, resilient, and reliable" detailing the drive. Reviewers did point out that the pricing situation would likely hinder adoption rates, and it's still unclear if a company more closely associated with cooling accessories and cases can stake a claim in the storage realm. Hit the source link for the full skinny if you're edging closer to pulling the trigger.
The joy and pain of upgrading a 27-inch iMac with an SSD (video)
As the old Chinese proverb says: "Time flies like an arrow." Just like that, today -- coincidentally the 27th -- marks the one year anniversary of my Core i7 27-inch iMac. No words can express the satisfaction of having such sheer screen estate and computing power all encased in one gorgeous body, but said joy started to fade recently -- ask my colleagues and they'll testify to my regular rants about the darn machine freezing up over the last few weeks. I've had it with the bloody hard drive, and being a geek who's pimped up his last two laptops with SSDs, I thought rather than just reformatting it, why not spoil my iMac with the same goodie that it clearly deserves? Read on to find out how the upgrade went.%Gallery-108375%
OCZ RevoDrive X2 PCIe SSD reviewed: blisteringly fast in every conceivable way
Hard to say why OCZ Technology pushed out revision two of its RevoDrive so soon after the original launched, but it's hard to complain with numbers like this. Just in time to shock the performance hound in your life with an outlandish Christmas gift comes the RevoDrive X2, and this here PCIe SSD solution has now been benchmarked to the hilt. The bottom line? It's fast. Really fast. In fact, Hot Hardware calls it "simply one of the fastest PCI Express based SSD solutions" that they have tested, noting that it went toe-to-toe with Fusion-io's ioXtreme while costing a good bit less. Critics over at Tweak Town echoed those thoughts, and while both teams felt the $680 asking price for a 240GB model was a touch pricey, neither felt that it wasn't worth it if you've got the coin laying around. Hit the links below for more charts than you'd ever want to see as an eight grader.
OCZ amps up performance on RevoDrive X2 PCIe SSD: 740MB/sec, up to 120k IOPS
Blink, and you've probably missed it. Just four short months after we saw OCZ Technology's original RevoDrive reviewed (and subsequently adored), along comes revision two. The RevoDrive X2 PCI-Express SSD looks, feels and smells the same as the first, but the performance is obviously looking north. The unit we saw introduced at Computex was capable of hitting 540MB/sec, while the X2 pushes that to 740MB/sec and up to 120,000 IOPS -- "nearly triple the throughput of other high-end SATA-based solutions." Furthermore, this guy packs double the SandForce SF-1200 controllers (four versus two in the original), and it retains the onboard RAID 0 design that you've come to know and love. It's available as we speak in 100GB to 960GB capacities, but there's nary a mention of price; something tells us that you're probably not the target market if you have to ask. %Gallery-106194%
MacBook Air upgrade kit bumps capacity to 256GB, turns old module into USB 3.0 SSD
Sure, the only remotely user-replaceable component on the 11.6-inch MacBook Air are those tiny Toshiba SSDs, but PhotoFast's got what might be one of the most elegant upgrade solutions we've ever seen. The Air USB 3 Adapter gives you not only a brand-spanking-new 256GB module with a Sandforce SF-1200 controller, but a speedy USB 3.0 flash drive too -- which smartly doubles as the mechanism by which you move your old files over, as you can just transfer everything through the USB port. Once you're done swapping modules, the company says you'll see a 30 percent speed boost over the original drive, with reported transfer rates of 250MB/s on both sequential reads and writes. Shame the Japanese company didn't specify any sort of estimated release date or price.
AngelBird's PCIe SSD solution brings breakneck speeds, achievable prices, 'incremental awesomeness'
PCIe SSD solutions tend to be two things: stupidly fast and stupidly expensive. With read performance of up to 1GB/s and writes happening at up to 900MB/s the Angelbird Wings solution certainly has the speed. And, at a starting price of $239 for a 16GB model, the pricing isn't too bad -- for this sort of setup, anyway. What you're getting for that money is an expandable PCIe controller board with slots for up to four SSDs of 120GB in size, each offering SandForce 1200 controllers. With one board you'll get pedestrian read and write speeds of just under 300MB/s. But, with each new drive you basically multiply that, with the maximum figures quoted above coming with four. Interestingly, the controller comes with its own onboard Linux flavor called Virtue, a full UI that you can boot directly into and get all your RAID ducks in a row. Full cost for a fully kitted out system with four boards? $1399, which is hardly cheap for a mere 500GB or so of storage, but is a solid price for 1GB/s performance.
