atmel
Latest
CSR's membrane puts wireless, super-thin touch controls on tablet covers
We marveled at how the Microsoft Surface's Touch Cover could fit a full keyboard into such a thin space, but it has nothing on a new membrane from CSR. The peripheral combines printed circuitry with a Bluetooth 4.0 chip, producing a flexible, nearly paper-thin (0.5mm) touch layer that can talk wirelessly to most mobile devices and accessories. It should also be highly responsive with less than 12ms of lag. CSR suggests the skin could be used for more than just tablet keyboard covers; it could equally apply to smart paper notebooks and interactive desks. The company hasn't named any customers for the membrane, but we should see more of it at IFA.
Olympia Circuits shows Arduino datalogger and Arno Add-Ons at Maker Faire 2013
Olympia Circuits is best known for its Arno board and Arno Shield, which are designed to ease the Arduino learning curve by providing a bevy of pre-wired sensors and controls along with detailed instructions for several DIY projects. The company announced a couple of new products at Maker Faire this past weekend: the Arno Digital RGB Add-On and the SODA HE-1.0 Arduino datalogger. With the former, your Arno simply gains three RGB LEDs, while the latter stands for "Simple, Open Data Acquisition, High Efficiency." It's an Arduino board with screw terminals designed around Atmel's ATmega32u4 that features a real-time clock (RTC) with battery backup, a high-precision ADC and a microSD card slot. The RTC can either wake the entire board or trigger an interrupt at set intervals, which makes the board very power efficient when used in the field. Olympia Circuits will be updating its website with more info shortly (including availability and pricing). Until then, don't miss our hands-on gallery below.%Gallery-188775%
Arduino Yun weds Arduino, WiFi and Linux at Maker Faire 2013
The Arduino Robot wasn't the only interesting product the Italian company launched at Maker Faire this past weekend. Arduino Yún combines a Leonardo board (featuring Atmel's ATmega32u4) with a MIPS-based WiFi SoC (Atheros AR9331) running Limino (an OpenWRT / Linux derivative). It includes everything you'd expect from a Leonardo board plus WiFi, wired Ethernet, a USB host port and a microSD card slot. The Arduino side can be programmed wirelessly and communicates with the WiFi SoC via SPI and UART interfaces using the new Bridge Library, which delegates networking to the Linux side. Out of the box, the board behaves just like any standard WiFi access point with a full web interface -- it even allows SSH access. Arduino Yún is the first of a family of WiFI-enabled products and will be available late June for $69. Check out the gallery below for some closeup shots, and follow the source for more details. %Gallery-188774%
Arduino Robot launches at Maker Faire, we go hands-on (video)
There's a new kid on the Arduino block, and it's called the Arduino Robot. Launched yesterday at Maker Faire Bay Area, it's the company's first product that extends beyond single microcontroller boards. The Roomba-like design, which we first saw in November 2011, is the result of a collaboration with Complubot. It consists of two circular boards, each equipped with Atmel's ubiquitous ATmega32u4 and connected via ribbon cable. The bottom board is home to four AA batteries (NiMH), a pair of motors and wheels, a power connector and switch plus some infrared sensors. By default it's programmed to drive the motors and manage power. The top board features a color LCD, a microSD card slot, an EEPROM, a speaker, a compass, a knob plus some buttons and LEDs. It's programmed to control the display and handle I/O. Everything fits inside a space that's about 10cm high and 19cm in diameter. Pre-soldered connectors and prototyping areas on each board make it easier to customize the robot platform with additional sensors and electronics. It even comes with eleven step-by-step projects and a helpful GUI right out of the box. The Arduino Robot is now on sale at the Maker Faire for $275 and will be available online in July. Take a look at our gallery below and watch our video interview with Arduino founder Massimo Banzi after the break. %Gallery-188773%
Atmel's XSense technology will make curved touchscreens possible (hands-on)
Atmel's XSense technology made its debut way back in April of 2012, but today ASUS became the first big name gadget maker to commit to using the tech -- pledging to put it in an unnamed next-gen tablet set to debut in Q1 of this year. For those unfamiliar, XSense is a capacitive touch sensor that can be bent and bonded to surfaces of any shape. We got to see XSense for ourselves at CES today and chat with its makers to learn a little more about it. While there are no technical limitations to the size of its touch sensors, Atmel's technology is currently limited to a max size of 32 inches due to manufacturing constraints. However, the company has plans to increase that fabrication size at its Colorado manufacturing facilities. We got to test out the technology on a piece of Corning Gorilla Glass bonded imbued with XSense (alas, no ASUS tablet sneak peeks to be had), and can confirm that the technology does work quite well. The company sees its touch sensor as a way for device makers to utilize currently unused edge real estate on phones and tablets, in addition to providing designers with more flexibility when creating gadgets. Of course, we'll have to see what kind of creative ways ASUS and other OEMs implement XSense, but you can see some shots of the sensor film and Atmel's demo unit in our gallery below. Follow all the latest CES 2013 news at our event hub.
Atmel's XSense promises curvy touchscreens that'll ruin your shirt line (video)
Touchscreen gurus Atmel may not be the most famous name around, but you'll find its gear inside devices like the Galaxy Note and the Galaxy Tab. Now it has pulled the dust-sheets from the latest innovation to emerge from its Californian headquarters: XSense. It's a flexible, super-thin, film-based touch sensor that can be curved and contorted any which way you choose while retaining accuracy. It'll also enable smartphone makers to create "edgeless" touchscreens without bezels, or have them cascade around the sides of the device. Now all we have to do is wonder if we really want a notably concave phone jabbing into our thighs, which you can ponder while you watch the concept video we've got for you after the break.
NVIDIA gets big names to embrace DirectTouch tech in Tegra 3 devices (video)
Synaptics, Atmel,N-trig, Raydium, Cypress and Focaltech -- big names in the field of touch-based devices -- have all agreed get on board with NVIDIA's DirectTouch platform. The tech offloads some of the work needed to track and process finger input from the controller to the Tegra 3, improving response and battery life. We were first introduced to the architecture at CES, but wasn't clear that others would embrace it. With two of the biggest makers of touchscreen controllers, Synaptics and Atmel, throwing their weight behind the project, though, things are looking up for NVIDIA-powered tablets. N-trig is even leveraging the processing power to improve the response of capacitive styli by combining DirectTouch with DuoSense (the tech behind the HTC Flyer). For more info check out the PR and video after the break.
Atmel maXTouch S touchscreen controllers promise thinner and lighter devices, reduced display noise
If you're rolling with a smartphone or tablet right now, there's a pretty high chance you've been taking advantage of Atmel's maXTouch technology without even knowing it. The company, which has manufactured touchscreen controllers for a plethora of devices over the last few years, is at CES 2012 to unveil its latest and greatest flagship product: the maXTouch S. Offered in the new lineup is the mXT224S, which focuses on displays between 3.5 and 4.3 inches; the mXT336S, which will be offered for screens between 4.3 and 5.5 inches; and the mXT1664S will take care of devices with anything 10.1 or above. The new line of technology promises to help phones and tablets become thinner and lighter -- the company claims OEMs can reduce a device's thickness by more than one millimeter, in fact -- without sacrificing touch responsiveness or battery life. It also claims to reduce display noise and add stylus support, and will be supported on devices running Android 4.0, Windows 8 and Windows Phone 8. Atmel's sampling the new lineup to customers as we speak, and should have production quantities ready to go before the end of the first quarter. Read all the interesting details in the press release below.
Arduino brings the (new) goods to Maker Faire New York, welcomes ARM into the fold
When Arduino unveiled a boatload of new products on Friday, we could have taken the easy route, posted the PR and called it a day. But, since the crew happened to be in town for Maker Faire, with a few folks from Atmel (makers of the AVR chip at the heart of the open source MCU) in tow, we figured why not go straight to the source. Arduino founder Massimo Banzi gave us a look at the company's latest offerings: the ARM-powered Arduino Due, the low-cost Arduino Leonardo, and aptly-named Arduino WiFi, as well as a peek at some of the group's upcoming plans. Keep on reading after the break for the juicy details.%Gallery-134242%
Atmel confirms the Samsung Galaxy Tab uses its maXTouch touchscreen controller
We're guessing it hasn't kept too many folks up at night, but those curious about the multitouch brains behind the Samsung Galaxy Tab now finally have their answer: Atmel's maXTouch touchscreen controller. As you may recall, that was first announced over a year ago, and promised to bring a whole host of benefits to multitouch devices, including unlimited touch functionality, and faster, more precise input than competing devices. Interestingly, Atmel has also boasted that its controller is able to recognize touches even with gloves -- in addition to styli -- but it's not clear if the Galaxy Tab takes advantage of that particular ability. Full press release is after the break.
Atmel maXTouch technology promises bigger, better capacitive touchscreens
Atmel may still be hedging its bets by offering some resistive touchscreen devices of its own, but it looks like it isn't making any secrets about its belief that capacitive touch is where the real action is, as fully evidenced by the firm's wonderfully dramatic video announcing its new maXTouch technology. In addition to kick-starting "a whole new era" (period), the new platform promises to support the development of capacitive touchscreens larger 10 inches, complete with full support for zooming, rotating, handwriting, shape recognition and other advanced functionality. What's more, the first device in the line (the mXT224) promises to blow a few minds by supporting not just finger touch, but input from a stylus, fingernails, or even gloves. The entire line of devices also fully support unlimited, simultaneous touches, and supposedly boast a refresh rate and signal-to-noise ratio that's 66% better than its nearest competitor. Of course, there's no indication as to when we can expect to see the first products using the new touchscreens just yet, but the mXT224 model is available right now for any companies interested, and Atmel says additional models will be rolling out in the fourth quarter of this year and throughout 2010.Read - Atmel maXTouch press releaseRead- maXTouch video and product site
Atmel intros 'industry's smallest' laser diode driver for HD DVD / Blu-ray
Atmel, the same firm known for cranking out uber-small GPS chips, has now created the "industry's smallest laser diode driver solution" for HD DVD, Blu-ray, DVD, and CD formats. The ATR0881 laser diode driver IC is available now and is designed for use in combination drives that play nice with all of the aforementioned discs. Notably, the ATR0881 itself is housed in a minuscule four- x four-millimeter QFN24 package, and should prove extremely useful in half-height combo drives as well as slim drives found in laptops. Smaller optical drives that handle every format harmoniously? Count us in.
