gun
Latest
Backscatter X-ray gun will help police hunt contraband
Though "strip-search" backscatter X-ray machines were pulled from US airports for privacy reasons, the tech has found a new home in the MINI Z portable scanner. Made by American Science and Engineering (AS&E), it displays see-through images on a Windows tablet PC from low-intensity backscatter X-rays that don't penetrate deeply into organic tissue. The company said it took seven years of research to shrink the X-ray tubes enough to create a handheld device that uses only 10 watts of power (see a simulation here or the video below). Scanning an object several times will even increase the detail. Backscatter X-rays don't penetrate deep into organic tissue, so the MINI Z is (theoretically) safe for operators and bystanders -- but it's not designed to scan humans anyway. Instead, the US military plans to put it to use searching for guns, explosives, drugs and organic materials. Its portable nature also makes it ideal for scanning vehicles, drug labs and hand baggage, to name a few scenarios -- so don't be surprised to see it at a customs checkpoint or concert near you. [Image credit: AS&E]
Watch the Navy's electromagnetic railgun blow stuff up before it hits the high seas
The Navy announced plans today to deploy an electromagnetic railgun that can do some epic damage. Set to go into testing on one of Navy's joint high speed vessels (JHSV) in 2016, the gun uses Lorentz Force to "rapidly accelerate and launch a projectile between two conductive rails." The result is a gun that can shoot a ton farther than a traditional weapon. Even better, it can maintain kinetic energy while it's in flight, making it so it doesn't need a lot of explosives on board to do some damage when it gets to the car, building, or other ship you're trying to blow up. The Navy's chief engineer, Rear Adm. Bryant Fuller says the gun will "allow us to effectively counter a wide-range of threats at a relatively low cost, while keeping our ships and sailors safer by removing the need to carry as many high-explosive weapons." JHSV's aren't used for combat, so the railguns will be on their way to some TBD boats soon. For now, you can see them in action in the official Navy video below.
Philadelphia says no to 3D printed guns
The Liberator made quite a name for itself a few months back when it became the first functioning all-3D printed gun, and while its maker designed it with mass distribution in mind, we now know one place where it's unwelcome: Philadelphia. The city of Brotherly Love lived up to its name yesterday, when the city council voted unanimously to ban folks from being able to print plastic pistols with which to shoot each other. That's right, it is now illegal to manufacture guns via 3D printer in Philadelphia. As of this writing, Philly's the first city to put such a ban in place, and it's not in response to a a rash of plastic pistols flooding the streets, either -- Philadelphia Magazine reports that it's just a preventative measure. Nice to see a city government trying to stop a problem before it starts, but we're betting it won't be long before someone in Philly takes to the courts to challenge the ban.
Final Delta Six design trades colorful buttons for military realism
The last time David Kotkin offered a public look at his Delta Six gun controller, it looked much as you'd expect: beige plastic, brightly colored buttons, and a garish, silver directional pad jutting from the side. Having raised nearly twice his $100,000 goal on Kickstarter, Kotkin made a few changes. The more realistic, new Delta Six includes bright red caps at the end of its barrel to help others determine whether you're playing a video game or planning a paramilitary raid, but otherwise it's the sort of detailed, carbon black hardware that you'd expect to see in the hands of a modern soldier. Kotkin claims the Delta Six will be available for purchase by the end of the year, but in the meantime, he has created a pre-order page for those players willing to spend $265 for such a meticulously detailed faux gun.
London museum turns 3D-printed Liberator guns into works of art
Home to some of the world's rarest pieces of art, London's Victoria & Albert (V&A) museum has just added a modern, yet controversial piece to its collection: the world's first 3D-printed weapon. The museum has managed to get its hands on the two prototype Liberator pistols which were successfully fired by their creator Cody Wilson back in May, offering London's culture lovers the chance to view the original $25 do-it-yourself plastic firearm in all its glory. The gun has come under fire for supposedly aiding terrorist threats, leading the State Department to demand Defense Distributed take down online copies of the Liberator's schematics. The V&A could have simply printed their own models, downloading the blueprints like 100,000 other people, but Wilson claims the originals add a sense of authenticity. One of the models is so authentic, it'll go on show with half of its right side blown off, because, y'know, guns.
A touch of military-grade tactics in Breach & Clear
This is Portabliss, a column about downloadable games that can be played on the go. Taking cues from the realism and mission planning in the original Rainbow Six games, Breach & Clear offers iOS players a turn-based, tactical strategy game with mountains of potential. Sadly, the Gun and Mighty Rabbit Studios project never reaches that potential, because much of the game is still in development. Initially, Breach & Clear captured my heart. Missions require strict planning and can be slow and plodding, which is directly up my extraordinarily boring alley. A customizable four-man squad, drawn from real world military organizations in the USA and Canada, enters a mission and can approach from a number of different entry points. In Breach & Clear's lone mode, Terrorist Hunt, the goal is to wipe out each room. It's entertaining at first, but after multiple plays of each of the game's fifteen missions at varying difficulties, Breach & Clear gets stale.%Gallery-194781%
University of Michigan activates antimatter 'gun,' cartoon supervillians twirl moustaches anew
At the University of Michigan, an international team of physicists has begun experimenting with its tabletop-sized super laser, modding it into an antimatter "gun." It's not quite a black hole-firing pistol, but we're slightly terrified nonetheless. Up until now, machines capable of creating positrons -- coupled with electrons, they comprise the energy similar to what's emitted by black holes and pulsars -- have needed to be as large as they are expensive. Creating these antimatter beams on a small scale will hopefully give astrophysicists greater insight into the "enigmatic features" of gamma ray bursts that are "virtually impossible to address by relying on direct observations," according to a paper published at arXiv. While the blasts only last fractions of a second each, the researchers report each firing produces a particle-density output level comparable to the accelerator at CERN. Just like that, the Longhorns/Wolverines super-laser arms-race begins again.
Inteliscope app version one shows off its iPhone-enabled sniping skills (video)
In the old days, when you wanted to double-tap a bad guy with an AR-15, you had to rely on plain-jane scopes or sights... booooring. Good thing we live in a more tactically technological time, the age of the Inteliscope -- a mount and app combo that lets you slap an iPhone or iPod touch atop an assault rifle to give the killing fields a little Cupertino flair. Until now, we'd only seen a screenshot of the app, but the company has just released a video of it in action. So, head on down to see for yourself what it's like swapping reticles, getting range info and recording video of target practice from a sniper's POV.
Inteliscope: because your tactical rifle totally needed an iPhone strapped to it
It's surely not the first contraption to bring an iDevice to a weapon, but the Inteliscope does appear to be one of the first to take itself seriously. It's designed to secure an iPhone 4 / 4S / 5 or iPod touch to any firearm with a Picatinny (Mil-STD-1913) or Weaver tactical rail, enabling shooters to peek around corners with no head exposure. Naturally, the mount itself wouldn't be all that attractive without an accompanying app. The software portion of the equation offers up custom crosshairs, a 5x digital zoom, video recording capabilities, ballistics / firearm data, a built-in compass and a shot timer. There's also a flashlight and strobe feature, information about local prevailing winds and a constant check on your location. Folks interested in pre-ordering can do so at the source link for $69.99, with initial shipments expected to head out in June.
Liberator gun made with consumer 3D printer, plastic pistol fires nine shots successfully (video)
Defense Distributed's plan is to put the power of guns in the hands of every person with access to the internet and a 3D printer. Until now, however, we'd only seen the Liberator pistol built using an expensive industrial-grade printer -- despite the fact that the blueprints for gun have been downloaded by thousands of people who don't have access to such a high-end machine. One of those folks decided to put the Liberator in the hands of the printing proletariat by making it with a consumer-level Lulzbot A0-101 3D printer, a nail and some common screws. This new version, called the Lulz Liberator, differs from the original in that it's got a rifled barrel and uses metal hardware to hold it together (as opposed to printed plastic pins). Printing it took around two days and used about $25 worth of generic ABS material, and the pistol produced was fired successfully nine times, but its creator claims it could've shot more. It's still a far cry from a Glock or Beretta, of course, as the gun misfired several times, and removing spent shell casings required the use of a hammer. So, it's not quite ready for prime time, but it's one more bit of proof that the age of printed pistols is officially upon us. [Image Credit: Michael Guslick]
3D-printed firearm plans downloaded 100,000 times, State Department steps in
That didn't take long -- just days after its first test fire, the Liberator, a 3D-printed pistol designed by Defense Distributed founder Cody Wilson, has caught the attention of the federal government. It's hardly a surprise: the arm's blueprints were downloaded more than 100,000 times since going live on DefCAD this week. It's not the amount of downloads that's causing trouble, though, it's who is downloading them. In a letter from the US State Department, Wilson was told that it's a violation of the International Traffic in Arms Regulations to "export any defense article or technical data for which a license or written approval is required without first obtaining the required authorization from the DDTC (Directorate of Defense Trade Controls)." The letter goes on to explain that these downloads legally count as exports under the law, telling Wilson to remove the plans from public access immediately. "That might be an impossible standard," Wilson told Forbes. "But we'll do our part to remove it from our servers." As it turns out, most of the gun's downloads were served via Mega, making full removal near impossible. Still, Wilson seems optimistic about the situation, explaining to Forbes that conversation will help mold the discussion on 3D printed weaponry. "Is this a workable regulatory regime? Can there be defense trade control in the era of the internet and 3D printing?" We're looking forward to discovering the answer ourselves.
Hands-on with the Delta Six gun controller (video)
Glimpses of the Delta Six have been teasing an ultra-realistic and motion-enabled gaming controller since last fall, and now that it's back on Kickstarter, we've gone hands-on with a prototype to see just how it handles. Though hardware and software tweaks have been made since it first surfaced, its creator David Kotkin says the peripheral is roughly 80 percent complete. For example, the beta version we took for a spin was only compatible with the Xbox 360, but the final product is set to play nice with the PS3, PC and Wii U, in addition to next-gen consoles via a software update. Hold the matte black prototype in your hands, and you'll notice it has a fair amount of heft to it. Its weight didn't take an immediate toll on this editor's arms, but some light fatigue was noticeable after about 20 or 30 minutes of play. The hardware is actually a stock airsoft gun that's been gutted and stuffed with Xbox 360 controller parts, a rechargeable battery and an Arduino. According to Kotkin, the faux firearm's code will be made open source, and users will be able to program it to their heart's content.%Gallery-187766%
Delta Six gaming gun returns to Kickstarter, boasts Arduino innards
The Delta Six gaming controller first hit Kickstarter last fall, but the plug was pulled from the crowdfunding effort by its creator David Kotkin, as he reckoned it wasn't on track to generate enough support. With hardware and software refinements made over the last few months, the peripheral has just been relisted on Kickstarter. In case you need a refresher, the peripheral puts a premium on realism and motion-enabled gaming. Thanks to accelerometers, gyroscopes and buttons in odd places, users can do things such as bring up in-game sights by looking down the plastic rifle's barrel, or steady their shot by pulling the faux weapon close to their arm. Now, the campaign is asking $159 for controllers with black or white paint jobs and orange tips, as a second look at production costs indicated the project's original $89 price tag was too low. This time around, the funding goal has been locked in at $100,000, instead of a cool half a million. As for internals, the shooter is toting an Arduino, which opens up the hardware to software updates and customization. Not only will the blaster work with PC, Xbox 360, PlayStation 3 and the Wii U, but it's set to boast compatibility with next-gen consoles through an update, to boot. If the Delta Six reaches it fundraising mark, it'll ship out to supporters in December. Check out our hands on with the contraption or head past the break for Kotkin's video pitch.
The Daily Roundup for 05.06.2013
You might say the day is never really done in consumer technology news. Your workday, however, hopefully draws to a close at some point. This is the Daily Roundup on Engadget, a quick peek back at the top headlines for the past 24 hours -- all handpicked by the editors here at the site. Click on through the break, and enjoy.
The Liberator, the first completely 3D-printed gun, gets test-fired (video)
The (almost) all-plastic 3D-printed Liberator pistol was announced by Defense Distributed late last week, but with the gun's blueprints and construction details now live on the company's own DefCAD design site, it's also released a video taken during its testing. In front of a Forbes onlooker, the clip apparently shows a .380 caliber bullet being fired by the Liberator. The only non-plastic part of the design is a common nail, which acts as the firing pin. Defense Distributed's founder Cody Wilson has worked over a year on the project, apparently citing the one-shot pistols that were designed to be air-dropped over France during World War II as inspiration -- also called the Liberator. This modern version is, however, formed of 15 components made inside a Stratasys Dimension SST 3D printer. The video of the test shot and more details are right after the break.
Robert Bowling producing Breach and Clear, coming to iOS
Robert Bowling is the former "creative strategist" at Infinity Ward, the developer studio that original created the enormously popular Call of Duty series over on the major consoles. A little while ago, he left that company (after some turmoil between the founders and publisher Activision) to start up his own endeavor, called Robotoki, which is working on a game set to arrive on mobile platforms like iOS called Human Element. But apparently that's not all Bowling's up to: He's also working with a publisher named Gun on an upcoming iOS game called Breach and Clear. We don't know a lot about this one yet, but it does look very impressive: It's a tactical, Special Operations shooter that's set to be free to play and feature a lot of customization and even real world gear. The game is set up a series of scenarios, where you'll be able to pick a loadout and team, and then go in and tactically take an opposing team of terrorists down. Sounds fun. Bowling is apparently producing this one, though it doesn't seem to be associated with his Robotoki studio. At any rate, we shouldn't have long to wait for this one: Breach and Clear is due out sometime later on this spring. As soon as we get to see some gameplay (or an exact release date), we'll let you know.
Delta Six controller gets redesigned, Kickstarted
Most video game controllers sporting a firearm form factor are a far cry from realistic -- bright colors, odd shapes and obvious thumbsticks leave many accessories looking more like toys than weapons. Not David Kotkin's Delta Six. This gun-shaped controller's first prototype looked so much like a real rifle, Kotkin told us, it had to be redesigned. An orange tip, whitewashed body and a few less authentic looking components don't make the Delta Six look any less believable as a digital soldier's modern musket, but it does make it less likely to be mistaken for the real McCoy. The peripheral's internals haven't changed though -- an accelerometer to help players aim and turn, cheek-sensing pressure sensors (for looking down the scope), faux-recoil and its assortment of modular components are still all on target. Like all budding hardware projects these days, the Delta Six is looking towards the crowd to source its production. According to the peripheral's Kickstarter page, the Delta Six will be available between July and August next year, boasting compatibility with the Xbox 360, PS3, PC, Wii U and even the OUYA. Pitching in $89 buys the basic submachine gun body (with a free rifle attachment for first-week buyers), and subsequent levels tack on additional attachments, bonus items and more. Kotkin needs $500,000 to make his rifle-shaped dream a reality. Like-minded FPS gamers can join him at the source link below. Not a dreamer? Feel free to read on for the official press release (plus a video and an additional image), instead.
Delta Six controller brings fragging to life, worries your friends
Chances are you know someone who takes their CoD a little too seriously -- well, this peripheral is for them. The Delta Six controller is the latest brainchild of Avenger inventor David Kotkin, made to please hardcore FPS gamers with immersive and responsive input. A built-in accelerometer is used for aiming, while the faux recoil and acting out a reload will put you closer to real combat than an appearance on Stars Earn Stripes. The hardware also features a scattering of pressure sensors -- allowing you, for example, to bring up the sights by meeting cheek with gun body, or if you're feeling lazy, squeezing the side of it instead. Depending on your class bias, you can add and retract plastic from the main frame for an SMG, assault or sniper rifle form factor (see below for the gist). There's no word on availability, or if it will actually improve your game, but the price is slated as $89 at launch. After the break is a short product demo in video form, although we suggest you skip straight to 1:30 to avoid the awkward live-action CTF scene.
Hex3 AppTag Laser Blaster turns iPhones and Androids into augmented reality laser tag gun sights (hands-on)
Nerf's doing it, and so is Hasbro, but there's plenty of room for other folks in the laser tag market, and Hex3 is a startup looking to get in on the action. Called the AppTag Laser Blaster, it combines old school IR-based laser tag with new school augmented reality. Like its aforementioned competition, the gun uses your Android or iPhone (yes, that includes the 5) and a companion app. The app turns your phone into a HUD when playing with friends or an AR window when you're shooting solo.%Gallery-165167% Where AppTag differs is in how the pistol communicates with your phone. It uses a proprietary high frequency audio signal that requires no pairing or other similar procedures -- you simply load up the app, clamp it to the gun and you're good to go. Additionally, AppTag's removable pistol grip is attached to the gun via a rail mount. That means the system can be attached to existing Nerf weapons and even real firearms should you be so inclined, plus there's a corded pressure switch that you can affix to the trigger of any gun. For now, there are a handful of games included in the app, but Hex3 is releasing an SDK so that developers can get creative building their own using the blaster's four buttons, trigger and reload switch. Interested? AppTag's currently up for pre-order at $59 bucks a pop, with shipping slated to start in 4-6 weeks. Before you part with any hard earned cash, however, check out our video after the break to see in action.
Student faces 15 years in prison over RuneScape robbery at gunpoint
What would you do if someone put a gun to your head and demanded that you hand over all your RuneScape gold? Fordham University students David Emani and Jonathan Dokler found out first hand when they were robbed of 4.7 billion RuneScape coins at gunpoint. Fellow student Humza Bajwa first attempted to buy the coins from the pair with an envelope full of counterfeit money. When confronted about the fake cash, Bajwa then put an air pistol that resembled a real firearm to Emani's head and ordered him to phone Dokler and tell him to transfer the coins. Though the gun wasn't a real firearm and only virtual property was stolen, Bajwa was later arrested by local police and charged with second-degree robbery and grand larceny. RuneScape developer Jagex doesn't condone the sale of coins for cash, but sales aren't illegal and the stolen coins could fetch around $3,300 US on the black market. In January, the Dutch Supreme Court ruled that a similar theft of virtual property in RuneScape at knifepoint did constitute theft as the items required an investment of time and energy to acquire. If convicted, Bajwa faces a potential prison sentence of up to 15 years for his crimes.
