Carbon ring storage promises 1,000 times higher memory density
[Via Graphene-Info]
hard drives posts
We'd heard that Seagate was prepping its first solid state hard drives, but there was no plan for consumer-friendly products in that vein anytime soon because solid state drives cost far more to produce than the conventional variety. Recently, CEO Bill Watkins hinted that the company intends to overcome that problem by combining relatively inexpensive (but unreliable) multi-layer cells with pricier (but dependable) single-layer cells in some kind of hybrid drive technology. It's all very pie in the sky right now, but surely it's a better hope than sticking to your old fashioned ways and seeking out opportunities to sue envelope-pushing competitors.
Just when solid-state drives were about to catch up to the spinners, Hitachi has gone and announced that it is working on a 5TB hard drive. It says the drive should be available by 2010 in a 3.5-inch format and will use perpendicular CPP-GMR tech to achieve some serious density. Just to show off, Hitachi's Yoshiro Shiroishi pointed out that the human brain has been estimated at (only?) around 10TB. So there we have it -- we're halfway to intellectual obsolescence. Don't say we didn't warn you!
As the flood of SSD announcements over the past couple days indicates, flash is rapidly gaining ground on traditional hard drive storage, and it may have just claimed it first victims: Hitachi has just announced that it will phase out production of 1.0 and 1.8-inch drives over the next year, and discontinue plans to launch a 1.5-inch line. Hitachi had only shipped 560,000 1.8-inch drives in the July - September quarter, representing only 3.2 percent of its total drive sales, and just a miniscule 3,000 1.0-inch drives in the same period. Hitachi says it'll keep supplying existing customers, but we're hearing that 1.0-inch production has already stopped, and that 1.8-inch production will cease by next summer.
We're all for bulking up the storage in our notebooks and portable gear, so naturally we're quite thrilled that Toshiba has developed a quintet of new 1.8-inch PATA hard drives that promise higher capacity and better performance for the gadgets we hold so dear. Three of the drives offer up 60GB on a single platter: the 4,200 RPM MK6028GAL for laptops and UMPCs, along with the 4,200 RPM MK6014GAL with 2MB buffer and 3,200 RPM MK6015GAA with 160KB buffer, both of which employ so-called "long data sector" technology to bring "format efficiency, improved error correction capability and enhanced storage capacity" to portable consumer electronics devices, according to ol' Tosh. Also destined for lightweight PCs are the dual-platter 120GB MK1214GAH and single-platter 80GB MK8025GAL, both 4,200 RPM drives with 2MB and 8MB buffers, respectively. Expect the new models to start appearing in consumer products sometime early next year. [Warning: PDF link]
In an acquisition that promises to create a combined company with over $1 billion in annual revenue, storage manufacturer Iomega has "entered into a definitive share purchase agreement" with ExcelStor Great Wall Technology Limited -- another storage firm headquartered in Beijing but doing business out of the Cayman Islands. ExcelStor, a subsidiary of the $2.6 billion Great Wall Technology Company Limited, has been manufacturing certain external hard drives for Iomega since 2004. The deal, still subject to approval, would create an organization with a 3,000-member workforce, led by Iomega's current executives joined by former ExcelStor management in the positions of Executive Chairman and Chief Administrative Officer.
Sure, your hard drive does an okay job, spinning around, hefting 200 gigabits per square inch, but wouldn't you know it, the sensors used to read all that data are reaching their physical limits. Enter the National Physical Laboratory in Teddington, UK, where researchers are proposing a whole new sensor design that could result in much thinner and smaller read heads, leading to drives with data densities as high as one terabit per square inch. According to the researchers, the sensors would use less power than current read heads, and could improve the speed of the reader. In the words of lead researcher Marian Vopsaroiu, "You could read back data ten times faster... instead of one GHz, you can read at five to ten GHz." Currently, hard drives use the magneto-resistance effect to read data, needing a constant current which converts resistance to voltage. The new sensors work by using the magneto-electric effect, wherein data's magnetic field will directly generate voltage instead of resistance. The new heads will be smaller and lighter as well, using half as many layers of materials as current sensors, but there are difficulties in putting together the complex alloys of the tiny readers. Want to know all the truly techy details? Grab a cup of strong coffee and hit the read link.








