Make no mistake, wrapping your mind around the build of an OLED panel is mighty tough to do. Without getting you mired in technobabble, let's just say that indium tin oxide (ITO) has generally been a mainstay in every single OLED that was produced commercially. Now, a team of researchers from AGFA-Gevaert, IMEC, Holst Centre and Philips have prototyped a 12- x 12-centimeter flexible OLED lighting panel that swaps out the ITO for highly-conductive transparent resin electrodes. You see, it's been difficult for OLED builders to secure enough electrical conductivity of ITO in a low-temperature process, and this new methodology is perfectly suited for the coating method (which makes it ripe for printing). The resin itself is being dubbed Orgacon, and tests have shown it to have a 6x improvement over ITO in terms of electrical conductivity. Beyond that, the crews are keeping the secrets safe from the poachers of the world, but here's hoping this amounts to more than just jovial celebration in a far off laboratory.

[Via OLED-Display]

Well, what do you know? Nearly four years after Arizona State University opened its very own flexible display center comes this, a prototype device that's purportedly easy to manufactur, easy on the environment and practically as strong as Thor. HP and ASU have teamed up to demonstrate the fresh e-displays, which are constructed almost entirely of plastic and consume far less power than traditional computer monitors. The "unbreakable displays" were crafted using self-aligned imprint lithography (SAIL) technology invented in HP Labs, and while we'd love to see this in a pliable laptop at CES 2009, we suspect it'll be a few years yet before these slither out to the commercial realm.

Update: HP Labs pinged us with this tidbit on the image above. "This image from the Flexible Display Center at ASU represents what the flexible display, a paper-like computer display made entirely of plastic, could look like in the future."

If there's one thing the business-savvy CEOs of the world know, it's that you don't want your competition to get too far ahead of you, and just as Plastic Logic announced its plans to build the first electronic paper plant in Dresden, Germany, Polymer Vision is trying to make good on its nearly two-year old promise. During 2005's IFA expo, Philip assured us all that we'd be blown away by the firm's rollable, bendable displays in a mere two years, and now that 24 months have nearly elapsed, a company spinoff is looking to make it happen. According to a German report, Polymer Vision is still on track for "commercializing the foldable PV-QML5 display" that we've all grown quite fond of. Planning to use the technology in e-books and electronic map guides, the initial 4.8-inch display will tout a 320 x 200 resolution, 10:1 contrast ratio, support for four gray tones, and be only 100 micrometers thick. Sadly, no hard dates were passed down as to when we could expect the first production batch to head out to consumers, but now that there's some serious competition brewing just a few miles down the road, we'd bet a good bit of effort goes into making that 2007 date a reality.

[Via I4U]