diydrones
Latest
3D Robotics' Chris Anderson discusses a drone-filled future (video)
You'll likely miss 3D Robotics on first pass. The company's San Diego R&D facility is headquartered in an unassuming building amongst similarly nondescript offices in a maze of a business park. Enter through the back and you'll find yourself in the middle of a small manufacturing assembly, where industrial Pick and Place machines buzz loudly and a handful of women are QAing finished product. Until earlier this month, the site was mostly off the radar, save for a devoted group of online enthusiasts. Then, Wired editor-in-chief Chris Anderson announced he was leaving the magazine in order to head up the company. Anderson's off grabbing lunch as we arrive -- like us, just off a flight from the East Coast for a brief visit before jumping on yet another plane. He's in transition at the moment, as the head of both Wired and 3D Robotics, trying out his keycard for the first time as we set up our film equipment to interview the newly minted executive for an upcoming Engadget Show segment. Anderson's ties to the company go back to its inception, however, co-founding 3D Robotics with Jordi Muñoz, a 19-year-old living in Tijuana when the two first met through Anderson's DIY Drones online community.
The E382 Aerial Mapping Airplane touts unmanned cartography, ready-to-fly drone kit starting at $600
Find yourself needing custom aerial maps on the regular? Is Google just not doing the trick when it comes to resolution? Well, the folks at Event 38 have got you covered. The outfit's model E382 photomapping UAV kit is now available for $600. Included in that price tag is a pre-assembled Skywalker airframe, 1250 kV brushless motor, motor speed controller, 4x servos, all the requisite cables and the ArduPilot Mega 2.0 autopilot system -- which handles GPS, flight data logs and pressure monitoring. In terms of performance, the drone cruises at a speed of 25MPH with a flight time of around an hour on a 5000mAh battery. The E382 makes use of a point and shoot camera to handle the cartography duties. You can use your own, or Canon A2200s are available for adding on to the kit at checkout. However, you will need to throw down some extra coin for the aforementioned flight battery and a controller. If you've got some extra cash burning a hole in your pocket, hit the source link below to snag one.
Maker Faire 2011, in pictures: Arduinos, Androids, and angry robots (video)
The rapture has come and gone, but the Maker Faire powers on. Despite warnings of a May 21st doomsday, folks came out in droves for the annual celebration of all things DIY, and we were there to bring you the best in homespun inventions. This year's Maker Faire was light on robots and big on corporate sponsorship. Among the giants supporting the little guys were Google, ASUS, and HP, but El Goog's presence extended beyond its dedicated tents. The new Android ADK was big with at-home tinkerers this year, spawning a number of little robots and at least one DIY alternative. Perhaps no other trend proved more pervasive than 3D printing, however -- every time we turned around there was another MakerBot or RapMan pumping out everything from statuettes of attendees to cutesy salt shakers. There were robotic building blocks, a Heineken-themed R2-D2, DIY drones, custom keyboards, and a ton of repurposed gadgets, but it was an arena of destructo-bots, tucked away in the farthest corner of the San Mateo County Event Center, that really blew us away. We came away sunburned and bedraggled, but lucky for you, we did all the dirty work so you don't have to. To see what made this year's Maker Faire, hop on past the break for a video of our favorite DIY finds. %Gallery-124165% Myriam Joire contributed to this report.
