iphone4white
Latest
White iPhone 4 thickness creates issue for case makers, owners
By now you've probably seen the latest spectacle to consume the white iPhone 4: it's thicker than the black model. The image above illustrates the point using a piece of lead from a mechanical pencil. So what, you say, in righteous indignation to a device that shipped ten months late. Well, the size difference creates a potential consumer issue since cases (at least the good ones) are manufactured against the tight tolerances supplied by Apple. We've confirmed ourselves, that an Incase slider that fits a black iPhone 4 just fine has to be forced into place on the new white model. Unfortunately, Apple's own spec page doesn't highlight the change in thickness (measured at 9.5mm by TiPb). Instead it still shows a 9.3mm depth with a tiny disclaimer stating, "Actual size and weight vary by configuration and manufacturing process." The result is confusion -- will this case fit or won't it? -- which is never a good thing for consumers. But why is the white iPhone 4 thicker? Phil Schiller mentioned that Apple needed to add extra UV protection among other tweaks, in an attempt to reduce the "unexpected interactions" between the white cover and the internal components. As such, Apple apparently needed to sacrifice some slimness for a better functioning white phone. In the end, we have what looks to be four different size / button configurations that must be considered when purchasing a shrink-wrapped case for your white iPhone 4, black iPhone 4, white Verizon iPhone 4, or black Verizon iPhone 4. Good luck with that. Additional reporting by Sam Sheffer [Thanks, Jon]
Why the camera isn't the culprit for the white iPhone 4's delay (update: Woz responds)
Unless you've been away from the Internet over the last few days, you would've no doubt heard about Woz's special appearance at the Engadget Show on Sunday. Unsurprisingly, a few websites ran with some quotes that they pulled from our interview -- specifically, the highlight was Woz "confirming" that the white iPhone 4 was indeed delayed due to camera issues. Well, I don't think this is the case at all. In fact, I'm sure there are plenty of other good reasons for why Apple's been delaying the much anticipated flavor of its flagship smartphone, but the camera just isn't one of them. Head right past the break and all will be explained. Update: Our man Woz has just responded in the comments: I said plenty to make it clear that I know nothing of Apple's reasons for rejecting anything ever. I told how when I got my white iPhone 4 assembled I tested the flash photos and they did indeed have problems. I spoke of testing flash photos versus non-flash ones and comparing flash photos between my white and black iPhones. I don't recall saying that it was a 'reason' Apple rejected the parts although I had read that. For the last part, we were referring to 0:55 in the interview video after the break, but now that Woz has spoken, it could've been a joke at the time that got misinterpreted by some websites. They tend to do that with Woz. Read on!
