remote control
Latest
LG launches 'RoboKing Triple Eye' smartphone-controlled vacuuming robot
You won't have to leave your post on the couch, but you will have to lift a finger to your smartphone in order to tidy up with LG's 'RoboKing Triple Eye' VR6180VMNV robot vacuum. Unlike it's purple cousin who spends his time looking inwards, this little guy is always looking outward with its three cameras, capturing video and sending it to your smartphone or PC over WiFi. The robot uses sensors to create a plan of attack map of your home, allowing you to move it around by clicking the filthiest parts. Like a well-trained puppy, the dust buster also responds to voice commands from up to 5 feet away and it doesn't even bark -- only emitting 48dB of sound while sucking up dust. Of course, laziness of this caliber doesn't come cheap, as it costs 899,000 Korean won, or around $840 bones.
Gemini-Scout robot can scope out mining accidents, may save lives (video)
We've seen robots capable of entering hazardous nuclear plants and dangerous buildings, but engineers at Sandia Labs have now unveiled a new rescue bot that's explicitly designed to enter and investigate collapsed mines, as well. Measuring just two feet tall and less than four feet in length, the Gemini-Scout Mine Rescue Robot packs a set of gas sensors, a thermal camera and a two-way radio, allowing it to detect dangerous underground materials and relay critical information to above-ground rescue workers. Its can also navigate across rocky terrain, tight quarters, or flooded tunnels, and is sturdy enough to carry food and other supplies to trapped miners. Operators, meanwhile, can manipulate the Gemini-Scout using only an Xbox 360 controller, which was incorporated into the system on the strength of its intuitive design and UI. Sandia's engineers demoed their bot last week in DC and are hoping to begin licensing it to rescue agencies by the end of next year. Crawl past the break for a video of their creation, along with a full press release.
ThinkFlood releases RedEye remote control app for Android, makes it even easier to sit around
Nearly two years after releasing their Red Eye app for iOS users, the convenience enthusiasts over at ThinkFlood have now brought the universal remote control to the Android community, as well. The app, which was released in beta a few months ago, allows users to remotely control their non-networked home theater, lighting and air conditioning systems from the comfort of their tablets, laptops or smartphones. Version 2.7.0 also brings plenty of customizable graphics and layouts, for those looking to add a more personal touch to their lives of leisure. Compatible with any device running Android 1.6 or later (including tablets running Honeycomb), the app features a built-in TV program guide that can be used with any display, but in order to take advantage of its other home theater controls, you'll have to purchase networked ThinkFlood hardware products like RedEye or RedEye Pro (it's not compatible with RedEye mini). If you're interested in downloading the tool for free, check out the source links below, or click past the break for more details, in the full PR.
Android gets a TiVo Premiere remote app with TiVo Commander
We're still waiting for a version of TiVo's official remote to come to Android, but now there's a homebrew option available in the meantime. TiVo Commander is a free open source app that just hit the Android Market based on the community's research of how TiVo's app talks to its DVRs. So far the feature list includes a full remote control with keyboard input, ability to browse recorded shows, search for shows/movies/actors, set recordings and see credits or suggestions for similar content to what's being watched. Of course you're giving up some of the slick look and convenient options that are still iOS-only but if you just want to get things working on your Motorola / Samsung / HTC / etc. device right now, that ability is just a click of the source link away. [Thanks, @BrennokBob]
Cablevision brings live TV streaming to iPhone and iPod touch
Cablevision has released the Optimum app for iPhone and iPod touch. The app allows Cablevision subscribers to stream live TV to an iPhones or iPod touch while in their home. What's cooler than streaming live TV is that the app even lets you watch your On Demand movies and shows on your iPod touch and iPhone. The app also lets you use either device as a remote control for your cable box, allowing you to schedule DVR recordings of shows right from your iPhone or iPod. The Optimum app follows Cablevision's release of Optimum for iPad back in April. Both apps are a free download and require users to be a Cablevision subscriber.
Cablevision's Optimum app hits 2.0, brings cable TV streaming to iPhone, iPod Touch
Cablevision took a major step into the future back in April when it opened up its full channel lineup for viewing on the tablet with Optimum for iPad, and now it's bringing that experience to other iOS devices. The new app, simply called Optimum, runs alongside the original and works on iPhones or iPod Touches, bringing the same controversial ability to stream live TV or play back video on-demand -- provided the viewer is still at home. That tether to your service address takes most of the shine off of viewing on mobile devices, but we won't argue too much about adding extra screens for no additional charge. The iPhone app launches at versino 2.0, sharing features with the newly updated iPad app including the ability to work as a remote control for the cable box and schedule DVR recordings remotely. Hit the source link below to grab either app from iTunes or check out the press release after the break.
3D-printed Mario Kart turtle shells race to rescue American economy
As soon as you see these little RC Koopa shells, you know that life can't be that bad. In fact, they've already had a hallelujah-inducing impact on the world of the 3D-printing genius who created them. Ten days ago, Michael Curry (aka Skimbal) was among America's 13.9 million unemployed, having been unceremoniously booted out of his ailing architect's firm. All he had was a $700 MakerBot printer to stop his hands from idling, but he made the most of it. MakerBot saw his stuff and were as bowled over as we are, so they just gave the guy a job. We're dusting off our Wii controllers and even those little plastic steering wheels in celebration.
Microsoft's new Xbox 360 Media Remote is missing the Media Center buttons
It was a bit of an afterthought in today's announcement from the Xbox team, but we thought you might like a closer look at the new Xbox 360 Media Remote. While it has a decent layout of controls, including your usual Xbox A, B, X, Y, and guide buttons, but the most notable buttons for us are the ones that are missing. As The Digital Lifestyle points out, it has no Windows Media Center buttons, unlike the previous Xbox 360 remotes. Does this mean its place as a Media Center Extender is suddenly unnecessary? We're not sure of that yet, it could just be a value choice made for the $20 remote that's due to ship in November, but with a press release playing up its ability to control Live TV it's certainly worth wondering what Microsoft is planning for the future.
Wall-E meets his Canadian DJ maker, turns into a real robot toy (video)
What do you get when you cross a dj with a "Canadian roboticist?" An almost true-to-fiction Wall-E, that's what. In this rendition of garbage-bot gone cute, amateur robotics enthusiast DJ Sures (yes, he makes music) hollowed out a U-Command Wall-E toy and fixed him up with some servo guts. The voice-activated, semi-autonomous modjob has a built-in eye camera that recognizes motion, colors and faces, coming the closest we've seen to replicating the CG-romantic. The whole AA-battery powered affair runs on the EZ-B Robot Controller software shown off by Sures in the video below. And unlike other past re-creations, this little guy knows how to get down without the need for sped up video tricks. Clearly, the Pixar-bred bot's become the unofficial icon of the homebrew robotics community, so where's his official counterpart? You listening Disney? Get cracking.
Vizio Tablet tiptoes into retail, starting at Costco
We know it's been a long wait since CES, but after getting pawed at by both Blake Griffin and yours truly, the Vizio Tablet is starting to show up in stores right about on schedule. Frequent Engadget commenter DaHarder took a step away from the Disqus box and snagged this tablet at a local Costco store for $329 ($20 off the regular price), an achievement also unlocked by the folks at Mobileslate. According to their reports you may have to ask around to find out if the VTAB1008 is actually in stock but it may be lurking along with its $40 Accessories Kit, while it's already showing in stock on the Vizio online store. Impressions so far suggest a "budget" tablet experience above that of the flood of craptablets with decent hardware and battery life, but a software experience behind the top of the line slates due to the custom UI, small internal storage and RAM and slower single core Marvell CPU. Our review is yet to come, but if there's around three bills burning a hole in your pocket and you've just got to have an Android tablet with integrated IR blaster, we're not seeing too many other options available. [Thanks, DaHarder]
Android trash can robot begs the question: 'Why are you hitting yourself?' (video)
We've seen robots that look like they've had one too many, but we're pretty sure this little guy needs to check into rehab. Despite its absolutely adorable appearance, this Android seems hell-bent on destruction, literally beating itself up, and eventually falling on its face. Built using the requisite Arduino, a trash can, some LEDs, and a slew of other components, this little guy was apparently created in three days on a budget just barely exceeding $100. You can see a video of the waste-bin bot hitting rock bottom at the source link below, but please refrain from laughing; Android alcoholism is a serious issue.
Wall-E gets a LEGO Mindstorms NXT makeover, tears up the dance floor (video)
Alright, let's all be upfront here. When you saw this Pixar masterpiece you caught yourself thinking, "Destruction of the Earth? Not so bad... if that means I get my own Wall-E." It's ok, other more robotically-adept Quebecers had the same idea. Except they managed to mix it up with a LEGO Mindstorms NXT kit and create a waste-collecting romantic of their own -- sans the devastation of our world. The brainchild of Montreal-based creator Marc-André Bazergui, project w.5 incorporates six NXT bricks, 17 motors and over a thousand parts that let the lovelorn bot reanimate his motorized chassis back into our hearts. It's an impressive feat you can watch below, but note the video has been sped up -- you didn't expect building bricks to move that fast, did you?
TiVo app jumps from iPad to iPhone, adds support for Series3 and HD DVRs
A magazine ad revealed it was on the way, and today TiVo came through by releasing a version of its remote app for the iPhone and iPod Touch. v1.5 does more than just get the existing iPad interface ready for smaller screens, it also increases compatibility by adding "limited compatibility" (search, browse and schedule recordings, plus the virtual remote) with older TiVo Series3, TiVo HD and TiVo HD XL DVRs, as well as TiVo Premieres supplied by cable providers RCN and Suddenlink. Still waiting in the wings is the promised Android version -- unless you're in the UK. Check out the press release after the break or just click the iTunes link below and give it a download yourself, especially since even the TiVo-less can browse its wares thanks to a new guest mode. [Thanks, @BrennokBob & Larry]
Comcast Xfinity TV app updated for Honeycomb Android tablets, Gingerbread phones and on iOS
Comcast's Xfinity TV app made its tablet debut on the iPad last year and now it's finally ready for Android tablets too. The most recent update on the Android market adds a Honeycomb version with remote control and video on-demand browsing seen above (only officially certified for the Xoom, but it should work on others as well) -- but not Play Now streaming, yet -- and also should fix the app on phones running Gingerbread. iOS users haven't been completely left out, as a minor bump has been issued that should fix a few technical issues on those platforms too. The free apps are available at the source links below, choose your preferred flavor and download away.
Insert Coin: Triggertrap open source automatic camera release (video)
In Insert Coin, we look at an exciting new tech project that requires funding before it can hit production. If you'd like to pitch a project, please send us a tip with "Insert Coin" as the subject line.Perhaps the simplest function on any camera, the shutter release is typically triggered using a dedicated button, or -- most often in the case of a professional rig -- using a wired or wireless remote. The Triggertrap falls into that latter category, completing the circuit necessary to capture an image after receiving commands from a virtually limitless array of sources. After pairing with your DSLR or ILC using a universal connector, you'll be able to trigger the device to snap a photo using a laser beam (thanks to the built-in photo transistor), sound (a hand clap, for example), or a timer -- typically most applicable to time-lapse photography. An auxiliary port will enable you to get even more creative -- you could release the shutter using a remote control, pressure trigger, or even a cell phone call, for example.The Triggertrap is well on its way to a Kickstarter campaign goal of $25,000, but there's still time to pre-order a DIY kit for $70, or a turn-key version for five bucks more. As always, Kickstarter will issue a refund if the project isn't funded before the July 31st deadline. Both devices are Arduino based and open source, so you're free to make modifications as you wish -- assuming you don't mind getting your hands dirty with a bit of programming. Jump past the break for a quick demo video, and keep an eye out for the creator's Pringles can DIY macro lens, just past the 13 second mark.
Sewell InjectIR extends your IR signal over HDMI, gives you even less reason to leave the couch
Is your HDMI cable really pulling its weight? Sure, it's delivering high-definition video and audio, but what has it done for you lately? InjectIR puts the cord to use, sending the IR signal from your Blu-ray / DVR / et al. remotes through its CEC channel, and then transmitting it directly into your hardware's sensor, thereby extending your IR range without an extra cable. The kit also has a switch for those times when you actually need to use the CEC channel. The InjectIR is up now for pre-order on Sewell's site. It'll start shipping next month and will run you $45 -- a small price to pay for being able to move the sofa back where it belongs. [Thanks, Ian]
Time Warner Cable internal docs reveal TWCable TV iPad app, DVR upgrades on the way
Internal documents we've received show Time Warner Cable is planning a major update for both its live TV streaming TWCable TV iPad app and many of its set-top boxes. TWCable TV 2.0 is scheduled to arrive on June 28th with new features including a seven day program guide, and the ability to use it as a remote control or to schedule the DVR remotely. Around that same time, its cable headends around the country will deliver the "Florence" update that brings its OpenCable Digital Navigator software to version 4.5 on certain Cisco, Motorola and Samsung set-top boxes. That should bring them up to speed with other platforms it uses, adding the ability to delete recordings in a multiroom setup, a transparent GUI, enhanced Start Over and Look Back features, settings to control aspect ratio, output resolution, pictures size and more. This may yet be the year we get to ditch the cable box, but while we still live with them you can see the full list of upgrades and which boxes will get them in the gallery and after the break. %Gallery-126624%
Japanese ball drone knows how to make an entrance (video)
Japan's Ministry of Defense is pretty good at its hovering drones, but we're not entirely convinced that this one will be fit for purpose. The RC reconnaissance scout reminds us of a spherical Iain M. Banks Culture drone, which is neat, except that this one's more conspicuous, dies after just eight minutes and was constructed not by an intergalactic artificial consciousness, but by a bunch of geeks who went foraging for parts in Akihabara. Nevertheless, it can do 40MPH and is surprisingly agile, as you'll see in the video -- watch out for the kissogram moment.
Martin Jetpack hits the 5,000 feet milestone, could come to market within 18 months (video)
OK, so the Martin Jetpack may not have gone into commercial production quite as soon as we'd anticipated, but there's still hope on the horizon. Over the weekend, Glenn Martin's flying machine successfully climbed some 5,000 feet above sea level, marking a new milestone in the 30-year, $12 million project. Remotely controlled by a tailing helicopter, the 250-pound craft used its two "superfans" to power itself skyward at about 800 feet per second minute, before safely parachuting back to Earth from a height of about 3,000 feet. As with its last test run, however, the Martin Jetpack was equipped not with a human being, but with a crash dummy. It may have been for the best, though, considering that the machine sustained some damage upon concluding the ten-minute flight. Nevertheless, Martin seems confident that yesterday's test "brings the future another step closer," and is hoping to deliver his brainchild to customers within the next 18 months -- plenty of time for us to hawk enough family heirlooms to afford that $86,000 price tag. Soar past the break for a video of the jetpack's big launch, or check out the source link for a more extensive interview with Martin and some background footage of his invention. [Thanks to everyone who sent this in]
Remote Potato for Media Center hits v1.0, serves up recorded TV, videos, and music to wherever you are
If you want control of your Windows PC and access to the media stored on it -- including Media Center recordings -- while you're actually somewhere else, the free Remote Potato server powers many solutions to enable that and recently hit version 1.0. Some of the new features include fully seekable video streaming in a web browser, on iPhone or iPad, and streaming of videos in "most major formats." Check the video demo above for an example of just what this software can do or hit the source link for the full changelog.
