cat5
Latest
Sony constructs two sets of whole-house HD video distribution products
If you're inclined to go big and multi-room with audio and video, Sony has unveiled some distribution products for you at the Pacific Coast Builders Conference, with two sets of high-definition video distribution products -- one for new construction, and one using existing Cat5 cabling. The NHS-3040 rack system is for new homes, and combines various Sony products for a whole-house distribution network: a home theater, XM Radio tuner, Blu-ray player, 400-disc DVD changer, and 80GB music storage and management server, along with support for 13 different audio/video zones. The NHS-2040 model drops you down to six zones, while the NHS-1040 removes the changer as well. For existing wiring, Sony offers up the CAV-CVS12ES HD switching system, which uses a single Cat5e per zone to route your video into up to 12 zones, and supports eight 1080p-capable component inputs. The system supports IR and RS-232 control, and pairs up with Sony's CAV-M1000 line of audio distro systems. As long as you're wiring up your house anyway, why not throw in Sony's WS-ADP4 doorbell intercom adapter with electronic door release, so you don't have to bother the butler to open the door for you while you're both in the third-floor bedroom watching Desperate Housewives in HD.Read - Sony NHS series distro systemRead - Sony CAV-CVS12ES Cat5e systemRead - WS-ADP4 doorbell intercom
How-To: Run your own network wiring
Wherever you call home, it probably didn't come wired up for that most precious of home utilities: internet access. Sometimes wireless networking can only take you so far. Guerrilla network wiring might sound a little strong, but sometimes it ends up feeling like an episode of MacGyver, without the bombs. (Unless you count flaming laptops.) In today's How-To, we'll show you how to make your own cables and teach you a few tricks for getting them where you need 'em most around the house.
Gefen's new component extender
In today's home theaters, no one want to have all their fancy equipment sitting on top of their shiny new HDTVs, and yesterday's technology can't help much when it comes to distributing HD signals around the house. Transferring HD material throughout the house or even to another room just got a little easier with Gefen's new Component Extender. The extender uses CAT5 to extend your VGA or component signals up to 300 feet and handles 1080p transmissions. It has VGA ports on the box but includes the VGA to component adapter. I could have used one of these in my setup, but instead I used 3 coax runs which are a little harder to run than a single CAT5 cable. On the other hand 3 coax runs doesn't cost $300 like Gefen's new device.
Extend an HDMI cable 150 feet
If HDMI is to replace all the other video transfer methods today, it has a few challenges it must overcome. Long cable runs is one of those challenges. Although there is no specified maximum cable length for HDMI, any distance over 50 feet can be difficult, or at the very least, expensive. Intelix has one possible solution. They just announced a HDMI over CAT-5 balun which will allow you to run two 150 foot CAT5 cables to connect your HDMI equipment. The device is HDCP compliant and is perfect for projectors or technology closets. It does seem odd to me that they choose CAT5, it seems that a single RG6 cable would have been a better choice.
