MIPS
Latest
Apple's former GPU maker Imagination agrees to £550 million sale
Losing Apple as a customer can be rough for a supplier, as Imagination Technologies found out. In April, the UK chipmaker announced that the folks in Cupertino planned to develop their own mobile GPUs and would no longer rely on its PowerVR tech for iPhones and iPads. The A11 Bionic chip inside Apple's new iPhone 8 series and upcoming iPhone X is the company's first-ever self-designed GPU. While still in dispute with Apple over the breakup plans, Imagination lost over 70 percent of its value and put itself up for sale. Now, it has found a buyer in Canyon Bridge Capital Partners, a China-backed fund. Recently, Donald Trump used his presidential power to block the fund from completing a $1.3 billion buyout of a US chipmaker, Lattice Semiconductor, over security concerns. Canyon Bridge is snapping up Imagination (minus its MIPS arm, which is being sold to other investors for $65 million) for £550 million ($743 million) in a move that it says will not cut staff or move the company's headquarters.
Imagination puts itself up for sale after being dumped by Apple
Once the world learned that Apple will design its own GPU for upcoming iPhones and iPads instead of using Imagination Technologies PowerVR tech, the UK company quickly lost 70 percent of its value. While it's still in "dispute" with Apple over the breakup, it already put two of its units, MIPS and Ensigma up for sale, and today announced that the entire company is open to being acquired. Its board of directors said in a press release that "it has received interest from a number of parties for a potential acquisition of the whole Group...and is engaged in preliminary discussions with potential bidders."
Splitting up with Apple is a chipmaker's nightmare
Apple is such a powerful company that, for third-party suppliers, it's hard not to become reliant on the cash that it pays you. But when Apple says that it's done, choosing to move whatever technology you provide in house, the results can be really painful.
Imagination Technologies to ARM: anything you can do, our new chips can do better
Despite Intel's best efforts, ARM remains the undisputed king of the mobile world, but another chip design house, just 51 miles down the road, is hoping to change that. Imagination Technologies, the outfit famous for its PowerVR mobile graphics tech, wants to knock its better-known rival off its perch with a new 64-bit MIPS chip. The Warrior I6400 promises to be a low-power, high-performance CPU for smartphones, tablets and internet of things devices that, the company claims, has the "technical superiority" over its competition. Since Android L will support silicon of this kind, Imagination is hoping that smartphone manufacturers will consider ditching ARM chips in favor of the plucky challenger. What does this mean for the consumer? Hopefully, faster devices, less power drain and a whole new topic where people can argue the merits of one architecture against the other.
Imagination Technologies will give its 'Raspberry Pi on steroids' away for free
Grab someone in the street and ask them about Imagination Technologies and they're more likely to run away than tell you that it's the company that designs the graphics chips for Apple's mobile devices. The company is more than just the home of PowerVR, however, and bought MIPS in order to become a direct rival to ARM, its more famous UK chip-design neighbor. Now, the company has decided to produce a Raspberry Pi-style development board in the hope of taking MIPS mainstream, describing it as "Raspberry Pi on steroids." Aside from the differences in hardware and chip architecture between the two devices, there's one big change in approach: Imagination Technologies is giving its board away for free.
This quarter-sized chip platform could power future Android Wear devices
While Intel has backtracked on its "Edison" chip size claims, another Android Wear partner is claiming that its system-on-chip is the size of the proverbial SD card. Imagination Technologies (MIPS) has just revealed the Newton platform based on its MIPS architecture, built by chip-making partner Ingenic. It uses Ingenic's power-sipping, Android-compatible 1GHz JZ4775 CPU (similar to that in the GEAK watch), to help it give smartwatches and other wearables 30 hours or more of battery life. A laundry list of other features is also baked in, like support for up to 3GB RAM, 720p video, WiFi, Bluetooth 4.0, NFC, MEMS sensors, health care sensors and USB support. Device makers can pick and choose those options thanks to the modular design, which also allows for rapid prototyping. In theory, that will help Android Wear hardware makers turn their designs into products more quickly -- and fulfill Google's ambitious product launch timetable.
Imagination details Warrior P5600 CPU core, promises high speed in a small package
After teasing us this summer, Imagination is ready to provide full details of its first Warrior CPU core. Its new P5600 design centers on the MIPS Series5 architecture, which brings performance upgrades like 128-bit SIMD (single instruction, multiple data) code support, hardware virtualization and numerous low-level optimizations. The design reportedly manages brisk 32-bit performance in a considerably smaller footprint than rivals -- a P5600 occupies about 30 percent less space than a "comparable" Exynos 5 Octa, Imagination says. It may be a long while before we see that speed in a smartphone, however. The company will start licensing the core this quarter, but customers still have to build processors and ship finished devices.
WiFi-equipped Arduino Yun now available for $69 (video)
If you were wondering what happened to the Arduino Yun after it missed its original June release target, you can relax: it's now on sale worldwide. As promised, the $69 (€52) design combines a garden variety Leonardo board with a WiFi system-on-chip running Limino, giving owners a customizable wireless access point with Ethernet, USB and a microSD slot. Tinkerers can also program the Arduino component over the air using a newly updated developer environment. Those already sold on the concept can buy an Arduino Yun at the source link, while newcomers can check out an introductory video after the break.
Imagination Tech CEO: 'The industry needs MIPS as much as MIPS needs the industry'
At an earlier press event in Shenzhen, Imagination Technologies' CEO Sir Hossein Yassaie delivered a clear message: his company's $100 million acquisition of MIPS isn't a short term strategy. Additionally, he has ambitious plans with the latter's chip architecture -- a well-known rival of ARM and Intel's x86. In his presentation, Yassaie boasted that there are currently over 300 SoCs based on MIPS. And out of the five billion devices shipped with Imagination Tech's IP to date, three billion of them use MIPS. These include phones, tablets (especially in China), wearables, printers, networking devices, storage devices and more.
Imagination Tech reveals Warrior CPU core to fight (uphill) battle against ARM
This news isn't remotely surprising, given Imagination Tech's recent acquisition of CPU designer MIPS, but reporting it still gives us a little flutter of excitement. And for good reason: Imagination has just revealed that its first MIPS-based CPU core, which should be able to run Android, will be introduced by the end of this year, and that it'll go by the totally appropriate codename of Warrior (or, less dramatically, "MIPS Series5"). The core's first battle will be to prove that the MIPS architecture really can be a competitive alternative to ARM (which uses a similar low-power RISC architecture) and that Imagination didn't just blow $100 million on hot air. Speaking of which, the attached press release comes with plenty of bold claims, including a statement that the 32-bit and 64-bit versions of Warrior will offer "best-in-class performance and efficiency," and a promise that Imagination "will change the landscape for CPU IP." We have no idea how all of this is going to play out, but we fully intend to be ringside when it does.
GEAK Watch packs Android, WiFi and a plethora of sensors, claims to be 'world's first true smartwatch'
Nowadays, we can't help but be skeptical of products that claim to be a smartwatch. In fact, what is a smartwatch, anyway? Perhaps GEAK, a Shanghai-based subsidiary of content giant Shanda, has a somewhat convincing answer. Simply dubbed the GEAK Watch, this wearable device packs a surprising number of components, with the most notable one being the 802.11b/g/n WiFi module -- a feature that Motorola's MOTOACTV already boasts. This lets the Android 4.1 system download apps directly or even receive OTA updates, but you can also create a wireless ad hoc network to do instant messaging with fellow users nearby -- the watch can apparently do voice-to-text input. There's also Bluetooth 4.0 and NFC for device pairing, along with GPS and FM radio -- yes, there's a headphone jack, too. In terms of sensory features, the GEAK Watch offers to monitor the user's sleeping pattern, pulse, blood pressure, body temperature, mood and number of steps walked (some of these require additional accessories). The components that take care of all these are somehow tucked into the 8mm-thick body of the watch, with the brain being the rare 1GHz Ingenic JZ4774 that's based on MIPS architecture. The chip's accompanied by 512MB of RAM, 4GB of storage and a suspiciously minuscule 500mAh lithium polymer cell -- no word on the battery life just yet, though. There's a 1.55-inch, 240 x 240 multi-touch OGS display to seal the device, and overall the watch is certified for a reasonable IPX3 water resistance. Honestly, this smartwatch sounds too good to be true, and it's only priced at just ¥1,999 or about $330. It'll be up for pre-ordering in China from July 3rd, so it shouldn't be long before we find out if the GEAK Watch is worthy of the "world's first true smartwatch" title.
Arduino Yun weds Arduino, WiFi and Linux at Maker Faire 2013
The Arduino Robot wasn't the only interesting product the Italian company launched at Maker Faire this past weekend. Arduino Yún combines a Leonardo board (featuring Atmel's ATmega32u4) with a MIPS-based WiFi SoC (Atheros AR9331) running Limino (an OpenWRT / Linux derivative). It includes everything you'd expect from a Leonardo board plus WiFi, wired Ethernet, a USB host port and a microSD card slot. The Arduino side can be programmed wirelessly and communicates with the WiFi SoC via SPI and UART interfaces using the new Bridge Library, which delegates networking to the Linux side. Out of the box, the board behaves just like any standard WiFi access point with a full web interface -- it even allows SSH access. Arduino Yún is the first of a family of WiFI-enabled products and will be available late June for $69. Check out the gallery below for some closeup shots, and follow the source for more details. %Gallery-188774%
Imagination Technologies snaps up CPU designer MIPS in an attempt to wrestle ARM
Looks like we can kiss goodbye to any lingering politeness in the rivalry between these two UK chip houses, because the smaller one has just embarked on a cheeky expansion. Having been known mainly for its PowerVR graphics processors, not least in many Apple products, Imagination Tech could potentially push into the CPU arena too, through its $60 million acquisition of MIPS Technologies. Just like ARM, MIPS designs low-power RISC processors for consumer electronics, but it has generally focused on smaller chips for devices like routers and TVs rather than smartphones and tablets. In addition to a portfolio of 82 exclusive patents, a squad of 160 MIPS engineers will now be transplanted to Imagination, where they'll no doubt be debriefed and reassigned to conquering the world. Meanwhile, in some sort of flanking move, ARM has paid a far higher sum of $170 million to gain access to a number of other MIPS patents. [Thanks, Michael]
$125 MIPS-based Smart Tab 1 brings Jelly Bean on a budget to India
A MIPS-based tablet was the first slate to officially run Android Ice Cream Sandwich, and the processor technology will also beat the crowds to running the new Jelly Bean OS. It might be second to the Nexus 7, but Karbonn Mobiles' new Smart Tab 1, available to the Indian market only, runs Google's latest software -- and its MIPS-based JZ4770 SoC, clocked at 1.2GHz, allows for the low price of $125. The 7-inch Smart Tab 1 itself isn't new -- it debuted with ICS in July -- but current owners will receive an update, and new units will ship with Jelly Bean. Other specs include a 2-megapixel front shooter, HDMI support, 3G support through a USB dongle and up to 32GB of expandable storage via the microSD card slot. Head to the press release past the break for more info.
MIPS unveils new Aptiv mobile chip design, vows more speed in a tiny space
MIPS has only had a slight amount of traction in smartphones and tablets given that its best friend is Ainovo. It might get a better footing in an ARM-dominated world with a new range of processors in the Aptiv line. The highest-end chip of the bunch, the ProAptiv, is reportedly much smaller than its ARM opponents across the aisle while managing the same speed, goosing the floating-point math, memory addressing and multi-core support to where it's as much as 75 percent faster over the previous generation. That's good news for mobile devices and set-top boxes where space is tight. MIPS isn't leaving embedded gear like 4G LTE modems alone, either, as the mid-size InterAptiv and tiny MicroAptiv are getting similar improvements. If you're eager to get cracking on a processor of your own, you can license MIPS' new work right away -- and us plebeians who simply buy the devices can expect Aptiv to be ready for gadget use by the middle of the year.
Ainovo $79 Novo7 Paladin Ice Cream Sandwich tablet hands-on
Nope, that's not a typo -- we just got our hands on a $79 Ice Cream Sandwich tablet. The folks from MIPS popped by the Engadget stage to talk about the budget device. The Ainovo Novo7 Paladin is available now in China, so if you actually want to get your hands on the thing here in the US, it will likely cost you a bit more when you actually factor in, you know, air fare and such, but the company assures us that something along the same lines ought to be coming to the States in the near future, with a similar price point. As expected, this isn't the sexiest tablet we've seen on the show floor -- you're not getting a Galaxy Tab here -- but the build quality is quite solid. The seven-inch screen is 800 x 480 -- again, not high-end specs we're dealing with, but it does the trick for casual gaming and YouTube videos, and the MIPS folks mention to us plans to bump up the res for a US release. Along the top of the device, you'll find three buttons: power, back and menu -- the placement on the latter two are a bit counterintuitive when first picking up the tablet, but you'll get used to it pretty quickly. Along the right side, you'll find a headphone jack, miniUSB port (yes, mini), volume buttons and a microSD slot for expanding the already decent 8GB of storage. Inside you'll find that MIPS-based 1GHz single core processor and 512MB of RAM -- again, not the greatest, but it should get the job done for most the paces you'd expect to put a $79 tablet through. There's no cameras or GPS on the thing, though we didn't really miss either one. If you're looking for something that can do video and stills, however, $20 more will get you the $99 Novo7 basic. Myriam Joire contributed to this report.
Ainovo's bargain Novo 7 ICS tablet ready to tickle US pockets?
Remember that curious $100, ICS-touting, Novo 7 tablet we saw back at the beginning of the month? Until now, the Ainovo (aka Ainol) branded device was a bit of a gambler's punt, with some Chinese sites charging a suspicion-arousing $60 shipping fee. Now, however, the odds are looking slightly better, with some US-centric retailers listing the 1GHz MIPS-based XBurst CPU slate as available for pre-order. With Gingerbread and Honeycomb versions still out there, you'll want to keep your eyes peeled and check exactly what you're getting. But, if you still really want some of the seven inch Android 4.0 budget-slab goodness (albeit for $19 more than initially thought), check the source links for more info.
Ainol launches the NOVO7, the world's first Android 4.0 tablet, for $100 plus shipping
Just as we were geeking out to the Jaguar 7's Ice Cream Sandwich demo and anxiously awaiting the Transformer Prime, Ingenic and MIPS completely took us by surprise by announcing the Ainol-branded NOVO7, the very first commercially available tablet with Ice Cream Sandwich officially loaded. To be specific, the device isn't brand new -- it's been previously available as a Honeycomb tablet and is now shipping with ICS pre-loaded. It's packing an Ingenic JZ4770 mobile applications processor and 1GHz MIPS-based XBurst CPU, which means this Android 4.0 slab isn't going to be the toughest workhorse in the market. What more would you expect from a $99 tablet? The Novo7 also comes with a 7-inch capacitive touchscreen, a Vivante GC860 GPU clocked at 444MHz, 1080p video decoding, rear 2MP camera with VGA front-facing cam, USB 2.0, HDMI 1.3, microSD slot and an endorsement from Andy Rubin himself. If temptation is just too much to overcome, you can head over to the More Coverage link to order one. However, if you'd rather wait a while to save a few bucks in shipping -- it's over half the cost of the tablet itself -- MIPS informed us that it'll be coming to the States and other parts of the world over "the next several months," and 8- and 9-inch versions of the NOVO are in the works as well. Head below for a video and press release. Oh, and existing NOVO7 customers may be wondering why their tablet hasn't received ICS yet; MIPS assured us that there's an upgrade path for those customers as well, though no announcements have been made.
Engadget Primed: SSDs and you
Primed goes in-depth on the technobabble you hear on Engadget every day -- we dig deep into each topic's history and how it benefits our lives. You can follow the series here. Looking to suggest a piece of technology for us to break down? Drop us a line at primed *at* engadget *dawt* com. If you're a storage aficionado -- and who here isn't? -- you've probably heard a lot about SSDs, those friendly solid-state disks promising dramatically improved performance over their magnetically inclined brethren. No doubt you've heard about the advantages, thanks to NAND storage that makes them silent, shock resistant, energy efficient and lightning quick. Yet you've also heard the horror stories: drive slowdowns, controller failures and manufacturer recalls. And adding to all those anxiety-producing headlines, there's the price premium. While most magnetic drives average around a nickel or dime per gigabyte, even consumer-grade SSDs still run $1-2 per gigabyte, often for drastically smaller-capacity drives. Three years ago, Intel launched its X25-M and X18-M: the "M" stood for "mainstream," and the pair of drives were designed to reintroduce solid-state storage to a cost-conscious consumer market. (Perhaps more importantly, they were also meant to solidify Intel's standing in the nascent SSD realm, up to that point a chaotic, Wild West-style domain. But we'll get to that.) For most users magnetic drives still remain king, with solid states appealing primarily to a niche of enterprise IT professionals and modding enthusiasts. How did that happen -- and should it be different? After the break we'll look at how and why SSDs haven't (yet) conquered the storage world, and examine whether they're poised to do just that.
Google TV: Who is the competition and what are they saying about it?
The Google TV has landed and is already sending ripples through the marketplace, but what about all the companies already blending internet and TV? Whether they are already planning to work with the new initiative (Rovi), even more firmly staking a claim on their existing technology and vision for the connected TV (Microsoft, Yahoo), sounding like it's an option for the future (Samsung, VIZIO, Boxee) or already working on their own Android on TV projects (People of Lava, MIPS) each one should tell a little bit about where this market is headed in the coming months and years. Read on for their statements -- and a quick breakdown of what each is bringing to the table in case you weren't already running a network cable to your HDTV years ago. Update: Now with reactions from Roku and PlayOn!
